On Thu, 30 Oct 2025, Denis Benato wrote:

> From: "Luke D. Jones" <luke@ljones.dev>
> 
> The fw_attributes_class provides a much cleaner interface to all of the
> attributes introduced to asus-wmi. This patch moves all of these extra
> attributes over to fw_attributes_class, and shifts the bulk of these
> definitions to a new kernel module to reduce the clutter of asus-wmi
> with the intention of deprecating the asus-wmi attributes in future.
> 
> The work applies only to WMI methods which don't have a clearly defined
> place within the sysfs and as a result ended up lumped together in
> /sys/devices/platform/asus-nb-wmi/ with no standard API.
> 
> Where possible the fw attrs now implement defaults, min, max, scalar,
> choices, etc. As en example dgpu_disable becomes:
> 
> /sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/
> ├── current_value
> ├── display_name
> ├── possible_values
> └── type
> 
> as do other attributes.
> 
> Co-developed-by: Denis Benato <denis.benato@linux.dev>
> Signed-off-by: Denis Benato <denis.benato@linux.dev>
> Signed-off-by: Luke D. Jones <luke@ljones.dev>
> ---
>  drivers/hid/hid-asus.c                        |   1 +
>  drivers/platform/x86/Kconfig                  |  12 +
>  drivers/platform/x86/Makefile                 |   1 +
>  drivers/platform/x86/asus-armoury.c           | 756 ++++++++++++++++++
>  drivers/platform/x86/asus-armoury.h           | 163 ++++
>  drivers/platform/x86/asus-wmi.c               |  10 +-
>  .../platform_data/x86/asus-wmi-leds-ids.h     |  50 ++
>  include/linux/platform_data/x86/asus-wmi.h    |  43 +-
>  8 files changed, 990 insertions(+), 46 deletions(-)
>  create mode 100644 drivers/platform/x86/asus-armoury.c
>  create mode 100644 drivers/platform/x86/asus-armoury.h
>  create mode 100644 include/linux/platform_data/x86/asus-wmi-leds-ids.h
> 
> diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
> index a444d41e53b6..472bca54642b 100644
> --- a/drivers/hid/hid-asus.c
> +++ b/drivers/hid/hid-asus.c
> @@ -27,6 +27,7 @@
>  #include <linux/hid.h>
>  #include <linux/module.h>
>  #include <linux/platform_data/x86/asus-wmi.h>
> +#include <linux/platform_data/x86/asus-wmi-leds-ids.h>
>  #include <linux/input/mt.h>
>  #include <linux/usb.h> /* For to_usb_interface for T100 touchpad intf check */
>  #include <linux/power_supply.h>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 46e62feeda3c..8b827680754c 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -262,6 +262,18 @@ config ASUS_WIRELESS
>  	  If you choose to compile this driver as a module the module will be
>  	  called asus-wireless.
>  
> +config ASUS_ARMOURY
> +	tristate "ASUS Armoury driver"
> +	depends on ASUS_WMI
> +	select FW_ATTR_CLASS
> +	help
> +	  Say Y here if you have a WMI aware Asus machine and would like to use the
> +	  firmware_attributes API to control various settings typically exposed in
> +	  the ASUS Armoury Crate application available on Windows.
> +
> +	  To compile this driver as a module, choose M here: the module will
> +	  be called asus-armoury.
> +
>  config ASUS_WMI
>  	tristate "ASUS WMI Driver"
>  	depends on ACPI_WMI
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index c7db2a88c11a..4b1220f9b194 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -33,6 +33,7 @@ obj-$(CONFIG_APPLE_GMUX)	+= apple-gmux.o
>  # ASUS
>  obj-$(CONFIG_ASUS_LAPTOP)	+= asus-laptop.o
>  obj-$(CONFIG_ASUS_WIRELESS)	+= asus-wireless.o
> +obj-$(CONFIG_ASUS_ARMOURY)	+= asus-armoury.o
>  obj-$(CONFIG_ASUS_WMI)		+= asus-wmi.o
>  obj-$(CONFIG_ASUS_NB_WMI)	+= asus-nb-wmi.o
>  obj-$(CONFIG_ASUS_TF103C_DOCK)	+= asus-tf103c-dock.o
> diff --git a/drivers/platform/x86/asus-armoury.c b/drivers/platform/x86/asus-armoury.c
> new file mode 100644
> index 000000000000..c5fe61557582
> --- /dev/null
> +++ b/drivers/platform/x86/asus-armoury.c
> @@ -0,0 +1,756 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Asus Armoury (WMI) attributes driver.
> + *
> + * This driver uses the fw_attributes class to expose various WMI functions
> + * that are present in many gaming and some non-gaming ASUS laptops.
> + *
> + * These typically don't fit anywhere else in the sysfs such as under LED class,
> + * hwmon or others, and are set in Windows using the ASUS Armoury Crate tool.
> + *
> + * Copyright(C) 2024 Luke Jones <luke@ljones.dev>
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/acpi.h>
> +#include <linux/array_size.h>
> +#include <linux/bitfield.h>
> +#include <linux/device.h>
> +#include <linux/dmi.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/fs.h>
> +#include <linux/kernel.h>
> +#include <linux/kmod.h>
> +#include <linux/kobject.h>
> +#include <linux/kstrtox.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/pci.h>
> +#include <linux/platform_data/x86/asus-wmi.h>
> +#include <linux/printk.h>
> +#include <linux/sysfs.h>
> +
> +#include "asus-armoury.h"
> +#include "firmware_attributes_class.h"
> +
> +#define ASUS_NB_WMI_EVENT_GUID "0B3CBB35-E3C2-45ED-91C2-4C5A6D195D1C"
> +
> +#define ASUS_MINI_LED_MODE_MASK   GENMASK(1, 0)
> +/* Standard modes for devices with only on/off */
> +#define ASUS_MINI_LED_OFF         0x00
> +#define ASUS_MINI_LED_ON          0x01
> +/* Like "on" but the effect is more vibrant or brighter */
> +#define ASUS_MINI_LED_STRONG_MODE 0x02
> +/* New modes for devices with 3 mini-led mode types */
> +#define ASUS_MINI_LED_2024_WEAK   0x00
> +#define ASUS_MINI_LED_2024_STRONG 0x01
> +#define ASUS_MINI_LED_2024_OFF    0x02
> +
> +struct asus_armoury_priv {
> +	struct device *fw_attr_dev;
> +	struct kset *fw_attr_kset;
> +
> +	/*
> +	 * Mutex to protect eGPU activation/deactivation
> +	 * sequences and dGPU connection status:
> +	 * do not allow concurrent changes or changes
> +	 * before a reboot if dGPU got disabled.
> +	 */
> +	struct mutex egpu_mutex;
> +
> +	u32 mini_led_dev_id;
> +	u32 gpu_mux_dev_id;
> +};
> +
> +static struct asus_armoury_priv asus_armoury = {
> +	.egpu_mutex = __MUTEX_INITIALIZER(asus_armoury.egpu_mutex),
> +};
> +
> +struct fw_attrs_group {
> +	bool pending_reboot;
> +};
> +
> +static struct fw_attrs_group fw_attrs = {
> +	.pending_reboot = false,
> +};
> +
> +struct asus_attr_group {
> +	const struct attribute_group *attr_group;
> +	u32 wmi_devid;
> +};
> +
> +static void asus_set_reboot_and_signal_event(void)
> +{
> +	fw_attrs.pending_reboot = true;
> +	kobject_uevent(&asus_armoury.fw_attr_dev->kobj, KOBJ_CHANGE);
> +}
> +
> +static ssize_t pending_reboot_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> +{
> +	return sysfs_emit(buf, "%d\n", fw_attrs.pending_reboot);
> +}
> +
> +static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot);
> +
> +static bool asus_bios_requires_reboot(struct kobj_attribute *attr)
> +{
> +	return !strcmp(attr->attr.name, "gpu_mux_mode");
> +}
> +
> +/**
> + * armoury_has_devstate() - Check presence of the WMI function state.
> + *
> + * @dev_id: The WMI method ID to check for presence.
> + *
> + * Returns: true iif method is supported.
> + */
> +static bool armoury_has_devstate(u32 dev_id)
> +{
> +	u32 retval;
> +	int status;
> +
> +	status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS, dev_id, 0, &retval);
> +	pr_debug("%s called (0x%08x), retval: 0x%08x\n", __func__, dev_id, retval);
> +
> +	return status == 0 && (retval & ASUS_WMI_DSTS_PRESENCE_BIT);
> +}
> +
> +/**
> + * armoury_get_devstate() - Get the WMI function state.
> + * @attr: NULL or the kobj_attribute associated to called WMI function.
> + * @dev_id: The WMI method ID to call.
> + * @retval:
> + * * non-NULL pointer to where to store the value returned from WMI
> + * * with the function presence bit cleared.
> + *
> + * Intended usage is from sysfs attribute checking associated WMI function.
> + *
> + * Returns:
> + * * %-ENODEV	- method ID is unsupported.
> + * * %0		- successful and retval is filled.
> + * * %other	- error from WMI call.
> + */
> +static int armoury_get_devstate(struct kobj_attribute *attr, u32 *retval, u32 dev_id)
> +{
> +	int err;
> +
> +	err = asus_wmi_get_devstate_dsts(dev_id, retval);
> +	if (err) {
> +		if (attr)
> +			pr_err("Failed to get %s: %d\n", attr->attr.name, err);
> +		else
> +			pr_err("Failed to get devstate for 0x%x: %d\n", dev_id, err);
> +
> +		return err;
> +	}
> +
> +	/*
> +	 * asus_wmi_get_devstate_dsts will populate retval with WMI return, but
> +	 * the true value is expressed when ASUS_WMI_DSTS_PRESENCE_BIT is clear.
> +	 */
> +	*retval &= ~ASUS_WMI_DSTS_PRESENCE_BIT;
> +
> +	return 0;
> +}
> +
> +/**
> + * armoury_set_devstate() - Set the WMI function state.
> + * @attr: The kobj_attribute associated to called WMI function.
> + * @dev_id: The WMI method ID to call.
> + * @retval:
> + * * Pointer to where to store the value returned from WMI or NULL.
> + *
> + * Intended usage is from sysfs attribute setting associated WMI function.
> + * Before calling set the presence of the function should be checked.
> + *
> + * Results !1 is usually considered a fail by ASUS, but some WMI methods
> + * (like eGPU or CPU cores) do use > 1 to return a status code or similar:
> + * in these cases caller is interested in the actual return value
> + * and should perform relevant checks.
> + *
> + * Returns:
> + * * %-EIO	- WMI function returned an error.
> + * * %0		- successful and retval is filled.
> + * * %other	- error from WMI call.
> + */
> +static int armoury_set_devstate(struct kobj_attribute *attr,
> +				     u32 value, u32 *retval, u32 dev_id)
> +{
> +	u32 result;
> +	int err;
> +
> +	err = asus_wmi_set_devstate(dev_id, value, retval ? retval : &result);
> +	if (err) {
> +		if (attr)
> +			pr_err("Failed to set %s: %d\n", attr->attr.name, err);
> +		else
> +			pr_err("Failed to set devstate for 0x%x: %d\n", dev_id, err);
> +
> +		return err;
> +	}
> +
> +	/*
> +	 * If retval == NULL caller is uninterested in return value:
> +	 * perform the most common result check here.
> +	 */
> +	if ((retval == NULL) && (result == 0)) {
> +		pr_err("Failed to set %s: (result): 0x%x\n", attr->attr.name, result);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static int attr_enum_list(char *buf, size_t enum_values)
> +{
> +	size_t i;
> +	int len = 0;
> +
> +	for (i = 0; i < enum_values; i++) {
> +		if (i == 0)
> +			len += sysfs_emit_at(buf, len, "%zu", i);
> +		else
> +			len += sysfs_emit_at(buf, len, ";%zu", i);
> +	}
> +	len += sysfs_emit_at(buf, len, "\n");
> +
> +	return len;
> +}
> +
> +/**
> + * attr_uint_store() - Send an uint to WMI method if within min/max inclusive.
> + * @kobj: Pointer to the driver object.
> + * @attr: Pointer to the attribute calling this function.
> + * @buf: The buffer to read from, this is parsed to `uint` type.
> + * @count: Required by sysfs attribute macros, pass in from the callee attr.
> + * @min: Minimum accepted value. Below this returns -EINVAL.
> + * @max: Maximum accepted value. Above this returns -EINVAL.
> + * @store_value: Pointer to where the parsed value should be stored.
> + * @wmi_dev: The WMI function ID to use.
> + *
> + * This function is intended to be generic so it can be called from any "_store"
> + * attribute which works only with integers.
> + * Integer to be sent to the WMI method is range checked and
> + * an error returned if out of range.
> + *
> + * If the value is valid and WMI is success then the sysfs attribute is notified
> + * and if asus_bios_requires_reboot() is true then reboot attribute
> + * is also notified.
> + *
> + * Returns: Either count, or an error.
> + */
> +static ssize_t attr_uint_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf,
> +			      size_t count, u32 min, u32 max, u32 *store_value, u32 wmi_dev)
> +{
> +	u32 value;
> +	int err;
> +
> +	err = kstrtou32(buf, 10, &value);
> +	if (err)
> +		return err;
> +
> +	if (value < min || value > max)
> +		return -EINVAL;
> +
> +	err = armoury_set_devstate(attr, value, NULL, wmi_dev);
> +	if (err)
> +		return err;
> +
> +	if (store_value != NULL)
> +		*store_value = value;
> +	sysfs_notify(kobj, NULL, attr->attr.name);
> +
> +	if (asus_bios_requires_reboot(attr))
> +		asus_set_reboot_and_signal_event();
> +
> +	return count;
> +}
> +
> +static ssize_t enum_type_show(struct kobject *kobj, struct kobj_attribute *attr,
> +			      char *buf)
> +{
> +	return sysfs_emit(buf, "enumeration\n");
> +}
> +
> +/* Mini-LED mode **************************************************************/
> +static ssize_t mini_led_mode_current_value_show(struct kobject *kobj,
> +						struct kobj_attribute *attr, char *buf)
> +{
> +	u32 value;
> +	int err;
> +
> +	err = armoury_get_devstate(attr, &value, asus_armoury.mini_led_dev_id);
> +	if (err)
> +		return err;
> +
> +	value = FIELD_GET(ASUS_MINI_LED_MODE_MASK, 0);
> +
> +	/*
> +	 * Remap the mode values to match previous generation mini-LED. The last gen
> +	 * WMI 0 == off, while on this version WMI 2 == off (flipped).
> +	 */
> +	if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) {
> +		switch (value) {
> +		case ASUS_MINI_LED_2024_WEAK:
> +			value = ASUS_MINI_LED_ON;
> +			break;
> +		case ASUS_MINI_LED_2024_STRONG:
> +			value = ASUS_MINI_LED_STRONG_MODE;
> +			break;
> +		case ASUS_MINI_LED_2024_OFF:
> +			value = ASUS_MINI_LED_OFF;
> +			break;
> +		}
> +	}
> +
> +	return sysfs_emit(buf, "%u\n", value);
> +}
> +
> +static ssize_t mini_led_mode_current_value_store(struct kobject *kobj,
> +						 struct kobj_attribute *attr,
> +						 const char *buf, size_t count)
> +{
> +	u32 mode;
> +	int err;
> +
> +	err = kstrtou32(buf, 10, &mode);
> +	if (err)
> +		return err;
> +
> +	if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE &&
> +	    mode > ASUS_MINI_LED_ON)
> +		return -EINVAL;
> +
> +	/*
> +	 * Remap the mode values so expected behaviour is the same as the last
> +	 * generation of mini-LED with 0 == off, 1 == on.
> +	 */
> +	if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) {
> +		switch (mode) {
> +		case ASUS_MINI_LED_OFF:
> +			mode = ASUS_MINI_LED_2024_OFF;
> +			break;
> +		case ASUS_MINI_LED_ON:
> +			mode = ASUS_MINI_LED_2024_WEAK;
> +			break;
> +		case ASUS_MINI_LED_STRONG_MODE:
> +			mode = ASUS_MINI_LED_2024_STRONG;
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +	}
> +
> +	err = armoury_set_devstate(attr, mode, NULL, asus_armoury.mini_led_dev_id);
> +	if (err)
> +		return err;
> +
> +	sysfs_notify(kobj, NULL, attr->attr.name);
> +
> +	return count;
> +}
> +
> +static ssize_t mini_led_mode_possible_values_show(struct kobject *kobj,
> +						  struct kobj_attribute *attr, char *buf)
> +{
> +	switch (asus_armoury.mini_led_dev_id) {
> +	case ASUS_WMI_DEVID_MINI_LED_MODE:
> +		return sysfs_emit(buf, "0;1\n");
> +	case ASUS_WMI_DEVID_MINI_LED_MODE2:
> +		return sysfs_emit(buf, "0;1;2\n");

These could have used the code in attr_enum_list() as well?

> +	default:
> +		return -ENODEV;
> +	}
> +}
> +ASUS_ATTR_GROUP_ENUM(mini_led_mode, "mini_led_mode", "Set the mini-LED backlight mode");
> +
> +static ssize_t gpu_mux_mode_current_value_store(struct kobject *kobj,
> +						struct kobj_attribute *attr,
> +						const char *buf, size_t count)
> +{
> +	int result, err;
> +	bool optimus;
> +
> +	err = kstrtobool(buf, &optimus);
> +	if (err)
> +		return err;
> +
> +	if (armoury_has_devstate(ASUS_WMI_DEVID_DGPU)) {
> +		err = armoury_get_devstate(NULL, &result, ASUS_WMI_DEVID_DGPU);
> +		if (err)
> +			return err;
> +		if (result && !optimus) {
> +			pr_warn("Cannot switch MUX to dGPU mode when dGPU is disabled: %02X\n",
> +				result);
> +			return -ENODEV;
> +		}
> +	}
> +
> +	if (armoury_has_devstate(ASUS_WMI_DEVID_EGPU)) {
> +		err = armoury_get_devstate(NULL, &result, ASUS_WMI_DEVID_EGPU);
> +		if (err)
> +			return err;
> +		if (result && !optimus) {
> +			pr_warn("Cannot switch MUX to dGPU mode when eGPU is enabled\n");
> +			return -EBUSY;
> +		}
> +	}
> +
> +	err = armoury_set_devstate(attr, optimus ? 1 : 0, NULL, asus_armoury.gpu_mux_dev_id);
> +	if (err)
> +		return err;
> +
> +	sysfs_notify(kobj, NULL, attr->attr.name);
> +	asus_set_reboot_and_signal_event();
> +
> +	return count;
> +}
> +ASUS_WMI_SHOW_INT(gpu_mux_mode_current_value, "%u\n", asus_armoury.gpu_mux_dev_id);
> +ASUS_ATTR_GROUP_BOOL(gpu_mux_mode, "gpu_mux_mode", "Set the GPU display MUX mode");
> +
> +static ssize_t dgpu_disable_current_value_store(struct kobject *kobj,
> +						struct kobj_attribute *attr, const char *buf,
> +						size_t count)
> +{
> +	int result, err;
> +	bool disable;
> +
> +	err = kstrtobool(buf, &disable);
> +	if (err)
> +		return err;
> +
> +	if (asus_armoury.gpu_mux_dev_id) {
> +		err = armoury_get_devstate(NULL, &result, asus_armoury.gpu_mux_dev_id);
> +		if (err)
> +			return err;
> +		if (!result && disable) {
> +			pr_warn("Cannot disable dGPU when the MUX is in dGPU mode\n");
> +			return -EBUSY;
> +		}
> +	}
> +
> +	scoped_guard(mutex, &asus_armoury.egpu_mutex) {
> +		err = armoury_set_devstate(attr, disable ? 1 : 0, NULL, ASUS_WMI_DEVID_DGPU);
> +		if (err)
> +			return err;
> +	}
> +
> +	sysfs_notify(kobj, NULL, attr->attr.name);
> +
> +	return count;
> +}
> +ASUS_WMI_SHOW_INT(dgpu_disable_current_value, "%d\n", ASUS_WMI_DEVID_DGPU);
> +ASUS_ATTR_GROUP_BOOL(dgpu_disable, "dgpu_disable", "Disable the dGPU");
> +
> +/* Values map for eGPU activation requests. */
> +static u32 egpu_status_map[] = {
> +	[0] = 0x00000000U,
> +	[1] = 0x00000001U,
> +	[2] = 0x00000101U,
> +	[3] = 0x00000201U,
> +};
> +
> +/*
> + * armoury_pci_rescan() - Performs a PCI rescan
> + *
> + * Bring up any GPU that has been hotplugged in the system.
> + */
> +static void armoury_pci_rescan(void)
> +{
> +	struct pci_bus *b = NULL;
> +
> +	pci_lock_rescan_remove();
> +	while ((b = pci_find_next_bus(b)) != NULL)
> +		pci_rescan_bus(b);
> +	pci_unlock_rescan_remove();
> +}
> +
> +/*
> + * The ACPI call to enable the eGPU might also disable the internal dGPU,
> + * but this is not always the case and on certain models enabling the eGPU
> + * when the dGPU is either still active or has been disabled without rebooting
> + * will make both GPUs malfunction and the kernel will detect many
> + * PCI AER unrecoverable errors.
> + */
> +static ssize_t egpu_enable_current_value_store(struct kobject *kobj, struct kobj_attribute *attr,
> +							const char *buf, size_t count)
> +{
> +	int err;
> +	u32 requested, enable, result;
> +
> +	err = kstrtou32(buf, 10, &requested);
> +	if (err)
> +		return err;
> +
> +	if (requested >= ARRAY_SIZE(egpu_status_map))
> +		return -EINVAL;
> +	enable = egpu_status_map[requested];
> +
> +	scoped_guard(mutex, &asus_armoury.egpu_mutex) {
> +		/* Ensure the eGPU is connected before attempting to activate it. */
> +		if (enable) {
> +			err = armoury_get_devstate(NULL, &result, ASUS_WMI_DEVID_EGPU_CONNECTED);
> +			if (err) {
> +				pr_warn("Failed to get eGPU connection status: %d\n", err);
> +				return err;
> +			}
> +			if (!result) {
> +				pr_warn("Cannot activate eGPU while undetected\n");
> +				return -ENOENT;
> +			}
> +		}
> +
> +		if (asus_armoury.gpu_mux_dev_id) {
> +			err = armoury_get_devstate(NULL, &result, asus_armoury.gpu_mux_dev_id);
> +			if (err)
> +				return err;
> +
> +			if (!result && enable) {
> +				pr_warn("Cannot enable eGPU when the MUX is in dGPU mode\n");
> +				return -ENODEV;
> +			}
> +		}
> +
> +		err = armoury_set_devstate(attr, enable, &result, ASUS_WMI_DEVID_EGPU);
> +		if (err) {
> +			pr_err("Failed to set %s: %d\n", attr->attr.name, err);
> +			return err;
> +		}
> +
> +		/*
> +		 * ACPI returns value 0x01 on success and 0x02 on a partial activation:
> +		 * performing a pci rescan will bring up the device in pci-e 3.0 speed,
> +		 * after a reboot the device will work at full speed.
> +		 */
> +		switch (result) {
> +		case 0x01:
> +			/*
> +			 * When a GPU is in use it does not get disconnected even if
> +			 * the ACPI call returns a success.
> +			 */
> +			if (!enable) {
> +				err = armoury_get_devstate(attr, &result, ASUS_WMI_DEVID_EGPU);
> +				if (err) {
> +					pr_warn("Failed to ensure eGPU is deactivated: %d\n", err);
> +					return err;
> +				}
> +
> +				if (result != 0)
> +					return -EBUSY;
> +			}
> +
> +			pr_debug("Success changing the eGPU status\n");
> +			break;
> +		case 0x02:
> +			pr_info("Success changing the eGPU status, a reboot is strongly advised\n");
> +			asus_set_reboot_and_signal_event();
> +			break;
> +		default:
> +			pr_err("Failed to change the eGPU status: wmi result is 0x%x\n", result);
> +			return -EIO;
> +		}
> +	}
> +
> +	/*
> +	 * Perform a PCI rescan: on every tested model this is necessary
> +	 * to make the eGPU visible on the bus without rebooting.
> +	 */
> +	armoury_pci_rescan();
> +
> +	sysfs_notify(kobj, NULL, attr->attr.name);
> +
> +	return count;
> +}
> +
> +static ssize_t egpu_enable_current_value_show(struct kobject *kobj, struct kobj_attribute *attr,
> +						char *buf)
> +{
> +	int i, err;
> +	u32 status;
> +
> +	scoped_guard(mutex, &asus_armoury.egpu_mutex) {
> +		err = armoury_get_devstate(attr, &status, ASUS_WMI_DEVID_EGPU);
> +		if (err)
> +			return err;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(egpu_status_map); i++) {
> +		if (egpu_status_map[i] == status)
> +			return sysfs_emit(buf, "%u\n", i);
> +	}
> +
> +	return -EIO;
> +}
> +
> +static ssize_t egpu_enable_possible_values_show(struct kobject *kobj, struct kobj_attribute *attr,
> +						char *buf)
> +{
> +	return attr_enum_list(buf, ARRAY_SIZE(egpu_status_map));
> +}
> +ASUS_ATTR_GROUP_ENUM(egpu_enable, "egpu_enable", "Enable the eGPU (also disables dGPU)");
> +
> +/* Simple attribute creation */
> +ASUS_ATTR_GROUP_ENUM_INT_RO(charge_mode, "charge_mode", ASUS_WMI_DEVID_CHARGE_MODE, "0;1;2",
> +			    "Show the current mode of charging");
> +ASUS_ATTR_GROUP_BOOL_RW(boot_sound, "boot_sound", ASUS_WMI_DEVID_BOOT_SOUND,
> +			"Set the boot POST sound");
> +ASUS_ATTR_GROUP_BOOL_RW(mcu_powersave, "mcu_powersave", ASUS_WMI_DEVID_MCU_POWERSAVE,
> +			"Set MCU powersaving mode");
> +ASUS_ATTR_GROUP_BOOL_RW(panel_od, "panel_overdrive", ASUS_WMI_DEVID_PANEL_OD,
> +			"Set the panel refresh overdrive");
> +ASUS_ATTR_GROUP_BOOL_RO(egpu_connected, "egpu_connected", ASUS_WMI_DEVID_EGPU_CONNECTED,
> +			"Show the eGPU connection status");
> +
> +/* If an attribute does not require any special case handling add it here */
> +static const struct asus_attr_group armoury_attr_groups[] = {
> +	{ &egpu_connected_attr_group, ASUS_WMI_DEVID_EGPU_CONNECTED },
> +	{ &egpu_enable_attr_group, ASUS_WMI_DEVID_EGPU },
> +	{ &dgpu_disable_attr_group, ASUS_WMI_DEVID_DGPU },
> +
> +	{ &charge_mode_attr_group, ASUS_WMI_DEVID_CHARGE_MODE },
> +	{ &boot_sound_attr_group, ASUS_WMI_DEVID_BOOT_SOUND },
> +	{ &mcu_powersave_attr_group, ASUS_WMI_DEVID_MCU_POWERSAVE },
> +	{ &panel_od_attr_group, ASUS_WMI_DEVID_PANEL_OD },
> +};
> +
> +static int asus_fw_attr_add(void)
> +{
> +	int err, i;
> +
> +	asus_armoury.fw_attr_dev = device_create(&firmware_attributes_class, NULL, MKDEV(0, 0),
> +						NULL, "%s", DRIVER_NAME);
> +	if (IS_ERR(asus_armoury.fw_attr_dev)) {
> +		err = PTR_ERR(asus_armoury.fw_attr_dev);
> +		goto fail_class_get;
> +	}
> +
> +	asus_armoury.fw_attr_kset = kset_create_and_add("attributes", NULL,
> +						&asus_armoury.fw_attr_dev->kobj);
> +	if (!asus_armoury.fw_attr_kset) {
> +		err = -ENOMEM;
> +		goto err_destroy_classdev;
> +	}
> +
> +	err = sysfs_create_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr);
> +	if (err) {
> +		pr_err("Failed to create sysfs level attributes\n");
> +		goto err_destroy_kset;
> +	}
> +
> +	asus_armoury.mini_led_dev_id = 0;
> +	if (armoury_has_devstate(ASUS_WMI_DEVID_MINI_LED_MODE))
> +		asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE;
> +	else if (armoury_has_devstate(ASUS_WMI_DEVID_MINI_LED_MODE2))
> +		asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE2;
> +
> +	if (asus_armoury.mini_led_dev_id) {
> +		err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj,
> +					 &mini_led_mode_attr_group);
> +		if (err) {
> +			pr_err("Failed to create sysfs-group for mini_led\n");
> +			goto err_remove_file;
> +		}
> +	}
> +
> +	asus_armoury.gpu_mux_dev_id = 0;
> +	if (armoury_has_devstate(ASUS_WMI_DEVID_GPU_MUX))
> +		asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX;
> +	else if (armoury_has_devstate(ASUS_WMI_DEVID_GPU_MUX_VIVO))
> +		asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX_VIVO;
> +
> +	if (asus_armoury.gpu_mux_dev_id) {
> +		err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj,
> +					 &gpu_mux_mode_attr_group);
> +		if (err) {
> +			pr_err("Failed to create sysfs-group for gpu_mux\n");
> +			goto err_remove_mini_led_group;
> +		}
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(armoury_attr_groups); i++) {
> +		if (!armoury_has_devstate(armoury_attr_groups[i].wmi_devid))
> +			continue;
> +
> +		err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj,
> +					 armoury_attr_groups[i].attr_group);
> +		if (err) {
> +			pr_err("Failed to create sysfs-group for %s\n",
> +			       armoury_attr_groups[i].attr_group->name);
> +			goto err_remove_groups;
> +		}
> +	}
> +
> +	return 0;
> +
> +err_remove_groups:
> +	while (i--) {
> +		if (armoury_has_devstate(armoury_attr_groups[i].wmi_devid))
> +			sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj,
> +					   armoury_attr_groups[i].attr_group);
> +	}
> +	if (asus_armoury.gpu_mux_dev_id)
> +		sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj, &gpu_mux_mode_attr_group);
> +err_remove_mini_led_group:
> +	if (asus_armoury.mini_led_dev_id)
> +		sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj, &mini_led_mode_attr_group);
> +err_remove_file:
> +	sysfs_remove_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr);
> +err_destroy_kset:
> +	kset_unregister(asus_armoury.fw_attr_kset);
> +err_destroy_classdev:
> +fail_class_get:
> +	device_destroy(&firmware_attributes_class, MKDEV(0, 0));
> +	return err;
> +}
> +
> +/* Init / exit ****************************************************************/
> +
> +static int __init asus_fw_init(void)
> +{
> +	char *wmi_uid;
> +
> +	wmi_uid = wmi_get_acpi_device_uid(ASUS_WMI_MGMT_GUID);
> +	if (!wmi_uid)
> +		return -ENODEV;
> +
> +	/*
> +	 * if equal to "ASUSWMI" then it's DCTS that can't be used for this
> +	 * driver, DSTS is required.
> +	 */
> +	if (!strcmp(wmi_uid, ASUS_ACPI_UID_ASUSWMI))
> +		return -ENODEV;
> +
> +	return asus_fw_attr_add();
> +}
> +
> +static void __exit asus_fw_exit(void)
> +{
> +	int i;
> +
> +	for (i = ARRAY_SIZE(armoury_attr_groups) - 1; i >= 0; i--) {
> +		if (armoury_has_devstate(armoury_attr_groups[i].wmi_devid))
> +			sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj,
> +					   armoury_attr_groups[i].attr_group);
> +	}
> +
> +	if (asus_armoury.gpu_mux_dev_id)
> +		sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj, &gpu_mux_mode_attr_group);
> +
> +	if (asus_armoury.mini_led_dev_id)
> +		sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj, &mini_led_mode_attr_group);
> +
> +	sysfs_remove_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr);
> +	kset_unregister(asus_armoury.fw_attr_kset);
> +	device_destroy(&firmware_attributes_class, MKDEV(0, 0));
> +}
> +
> +module_init(asus_fw_init);
> +module_exit(asus_fw_exit);
> +
> +MODULE_IMPORT_NS("ASUS_WMI");
> +MODULE_AUTHOR("Luke Jones <luke@ljones.dev>");
> +MODULE_DESCRIPTION("ASUS BIOS Configuration Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("wmi:" ASUS_NB_WMI_EVENT_GUID);
> diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h
> new file mode 100644
> index 000000000000..9f2c98df5fd7
> --- /dev/null
> +++ b/drivers/platform/x86/asus-armoury.h
> @@ -0,0 +1,163 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + *
> + * Definitions for kernel modules using asus-armoury driver
> + *
> + *  Copyright (c) 2024 Luke Jones <luke@ljones.dev>

Nit, extra space.

> + */
> +
> +#ifndef _ASUS_ARMOURY_H_
> +#define _ASUS_ARMOURY_H_
> +
> +#include <linux/types.h>
> +#include <linux/platform_device.h>
> +
> +#define DRIVER_NAME "asus-armoury"
> +
> +#define __ASUS_ATTR_RO(_func, _name)					\
> +	{								\
> +		.attr = { .name = __stringify(_name), .mode = 0444 },	\
> +		.show = _func##_##_name##_show,				\
> +	}
> +
> +#define __ASUS_ATTR_RO_AS(_name, _show)					\
> +	{								\
> +		.attr = { .name = __stringify(_name), .mode = 0444 },	\
> +		.show = _show,						\
> +	}
> +
> +#define __ASUS_ATTR_RW(_func, _name) \
> +	__ATTR(_name, 0644, _func##_##_name##_show, _func##_##_name##_store)
> +
> +#define __WMI_STORE_INT(_attr, _min, _max, _wmi)			\
> +	static ssize_t _attr##_store(struct kobject *kobj,		\
> +				     struct kobj_attribute *attr,	\
> +				     const char *buf, size_t count)	\
> +	{								\
> +		return attr_uint_store(kobj, attr, buf, count, _min,	\
> +					_max, NULL, _wmi);		\

So this function is static in the .c file and you're using it in this 
header?

> +	}
> +
> +#define ASUS_WMI_SHOW_INT(_attr, _fmt, _wmi)					\
> +	static ssize_t _attr##_show(struct kobject *kobj,			\
> +				    struct kobj_attribute *attr, char *buf)	\
> +	{									\
> +		u32 result;							\
> +		int err;							\
> +										\
> +		err = armoury_get_devstate(attr, &result, _wmi);		\

Include missing.

> +		if (err)							\
> +			return err;						\
> +		return sysfs_emit(buf, _fmt, result);				\

Include missing.

This is a header file so includes should be added for each used function.
For struct pointers which are not deferenced, you may forward-declare just 
the struct without bringing in the whole include for it.

> +	}
> +
> +/* Create functions and attributes for use in other macros or on their own */
> +
> +/* Shows a formatted static variable */
> +#define __ATTR_SHOW_FMT(_prop, _attrname, _fmt, _val)				\
> +	static ssize_t _attrname##_##_prop##_show(				\
> +		struct kobject *kobj, struct kobj_attribute *attr, char *buf)	\
> +	{									\
> +		return sysfs_emit(buf, _fmt, _val);				\
> +	}									\
> +	static struct kobj_attribute attr_##_attrname##_##_prop =		\
> +		__ASUS_ATTR_RO(_attrname, _prop)
> +
> +#define __ATTR_RO_INT_GROUP_ENUM(_attrname, _wmi, _fsname, _possible, _dispname)\
> +	ASUS_WMI_SHOW_INT(_attrname##_current_value, "%d\n", _wmi);		\
> +	static struct kobj_attribute attr_##_attrname##_current_value =		\
> +		__ASUS_ATTR_RO(_attrname, current_value);			\
> +	__ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname);		\
> +	__ATTR_SHOW_FMT(possible_values, _attrname, "%s\n", _possible);		\
> +	static struct kobj_attribute attr_##_attrname##_type =			\
> +		__ASUS_ATTR_RO_AS(type, enum_type_show);			\
> +	static struct attribute *_attrname##_attrs[] = {			\
> +		&attr_##_attrname##_current_value.attr,				\
> +		&attr_##_attrname##_display_name.attr,				\
> +		&attr_##_attrname##_possible_values.attr,			\
> +		&attr_##_attrname##_type.attr,					\
> +		NULL								\
> +	};									\
> +	static const struct attribute_group _attrname##_attr_group = {		\
> +		.name = _fsname, .attrs = _attrname##_attrs			\
> +	}
> +
> +#define __ATTR_RW_INT_GROUP_ENUM(_attrname, _minv, _maxv, _wmi, _fsname,\
> +				 _possible, _dispname)			\
> +	__WMI_STORE_INT(_attrname##_current_value, _minv, _maxv, _wmi);	\
> +	ASUS_WMI_SHOW_INT(_attrname##_current_value, "%d\n", _wmi);	\
> +	static struct kobj_attribute attr_##_attrname##_current_value =	\
> +		__ASUS_ATTR_RW(_attrname, current_value);		\
> +	__ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname);	\
> +	__ATTR_SHOW_FMT(possible_values, _attrname, "%s\n", _possible);	\
> +	static struct kobj_attribute attr_##_attrname##_type =		\
> +		__ASUS_ATTR_RO_AS(type, enum_type_show);		\
> +	static struct attribute *_attrname##_attrs[] = {		\
> +		&attr_##_attrname##_current_value.attr,			\
> +		&attr_##_attrname##_display_name.attr,			\
> +		&attr_##_attrname##_possible_values.attr,		\
> +		&attr_##_attrname##_type.attr,				\
> +		NULL							\
> +	};								\
> +	static const struct attribute_group _attrname##_attr_group = {	\
> +		.name = _fsname, .attrs = _attrname##_attrs		\
> +	}
> +
> +/* Boolean style enumeration, base macro. Requires adding show/store */
> +#define __ATTR_GROUP_ENUM(_attrname, _fsname, _possible, _dispname)	\
> +	__ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname);	\
> +	__ATTR_SHOW_FMT(possible_values, _attrname, "%s\n", _possible);	\
> +	static struct kobj_attribute attr_##_attrname##_type =		\
> +		__ASUS_ATTR_RO_AS(type, enum_type_show);		\
> +	static struct attribute *_attrname##_attrs[] = {		\
> +		&attr_##_attrname##_current_value.attr,			\
> +		&attr_##_attrname##_display_name.attr,			\
> +		&attr_##_attrname##_possible_values.attr,		\
> +		&attr_##_attrname##_type.attr,				\
> +		NULL							\
> +	};								\
> +	static const struct attribute_group _attrname##_attr_group = {	\
> +		.name = _fsname, .attrs = _attrname##_attrs		\
> +	}
> +
> +#define ASUS_ATTR_GROUP_BOOL_RO(_attrname, _fsname, _wmi, _dispname)	\
> +	__ATTR_RO_INT_GROUP_ENUM(_attrname, _wmi, _fsname, "0;1", _dispname)
> +
> +
> +#define ASUS_ATTR_GROUP_BOOL_RW(_attrname, _fsname, _wmi, _dispname)	\
> +	__ATTR_RW_INT_GROUP_ENUM(_attrname, 0, 1, _wmi, _fsname, "0;1", _dispname)
> +
> +#define ASUS_ATTR_GROUP_ENUM_INT_RO(_attrname, _fsname, _wmi, _possible, _dispname)	\
> +	__ATTR_RO_INT_GROUP_ENUM(_attrname, _wmi, _fsname, _possible, _dispname)
> +
> +/*
> + * Requires <name>_current_value_show(), <name>_current_value_show()
> + */
> +#define ASUS_ATTR_GROUP_BOOL(_attrname, _fsname, _dispname)		\
> +	static struct kobj_attribute attr_##_attrname##_current_value =	\
> +		__ASUS_ATTR_RW(_attrname, current_value);		\
> +	__ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname)
> +
> +/*
> + * Requires <name>_current_value_show(), <name>_current_value_show()
> + * and <name>_possible_values_show()
> + */
> +#define ASUS_ATTR_GROUP_ENUM(_attrname, _fsname, _dispname)			\
> +	__ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname);		\
> +	static struct kobj_attribute attr_##_attrname##_current_value =		\
> +		__ASUS_ATTR_RW(_attrname, current_value);			\
> +	static struct kobj_attribute attr_##_attrname##_possible_values =	\
> +		__ASUS_ATTR_RO(_attrname, possible_values);			\
> +	static struct kobj_attribute attr_##_attrname##_type =			\
> +		__ASUS_ATTR_RO_AS(type, enum_type_show);			\
> +	static struct attribute *_attrname##_attrs[] = {			\
> +		&attr_##_attrname##_current_value.attr,				\
> +		&attr_##_attrname##_display_name.attr,				\
> +		&attr_##_attrname##_possible_values.attr,			\
> +		&attr_##_attrname##_type.attr,					\
> +		NULL								\
> +	};									\
> +	static const struct attribute_group _attrname##_attr_group = {		\
> +		.name = _fsname, .attrs = _attrname##_attrs			\
> +	}
> +
> +#endif /* _ASUS_ARMOURY_H_ */
> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> index c3e90517ce0f..ff98267e5981 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -15,6 +15,7 @@
>  
>  #include <linux/acpi.h>
>  #include <linux/backlight.h>
> +#include <linux/bits.h>
>  #include <linux/debugfs.h>
>  #include <linux/delay.h>
>  #include <linux/dmi.h>
> @@ -30,6 +31,7 @@
>  #include <linux/pci.h>
>  #include <linux/pci_hotplug.h>
>  #include <linux/platform_data/x86/asus-wmi.h>
> +#include <linux/platform_data/x86/asus-wmi-leds-ids.h>
>  #include <linux/platform_device.h>
>  #include <linux/platform_profile.h>
>  #include <linux/power_supply.h>
> @@ -55,8 +57,6 @@ module_param(fnlock_default, bool, 0444);
>  #define to_asus_wmi_driver(pdrv)					\
>  	(container_of((pdrv), struct asus_wmi_driver, platform_driver))
>  
> -#define ASUS_WMI_MGMT_GUID	"97845ED0-4E6D-11DE-8A39-0800200C9A66"
> -
>  #define NOTIFY_BRNUP_MIN		0x11
>  #define NOTIFY_BRNUP_MAX		0x1f
>  #define NOTIFY_BRNDOWN_MIN		0x20
> @@ -105,8 +105,6 @@ module_param(fnlock_default, bool, 0444);
>  #define USB_INTEL_XUSB2PR		0xD0
>  #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
>  
> -#define ASUS_ACPI_UID_ASUSWMI		"ASUSWMI"
> -
>  #define WMI_EVENT_MASK			0xFFFF
>  
>  #define FAN_CURVE_POINTS		8
> @@ -561,8 +559,8 @@ static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval)
>   *
>   * Returns:
>   * * %-ENODEV	- method ID is unsupported.
> - * * %0			- successful and retval is filled.
> - * * %other		- error from WMI call.
> + * * %0		- successful and retval is filled.
> + * * %other	- error from WMI call.
>   */
>  int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval)
>  {
> diff --git a/include/linux/platform_data/x86/asus-wmi-leds-ids.h b/include/linux/platform_data/x86/asus-wmi-leds-ids.h
> new file mode 100644
> index 000000000000..281b98ba0ca7
> --- /dev/null
> +++ b/include/linux/platform_data/x86/asus-wmi-leds-ids.h
> @@ -0,0 +1,50 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H
> +#define __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H
> +
> +#include <linux/types.h>
> +#include <linux/dmi.h>
> +
> +/* To be used by both hid-asus and asus-wmi to determine which controls kbd_brightness */
> +#if IS_REACHABLE(CONFIG_ASUS_WMI) || IS_REACHABLE(CONFIG_HID_ASUS)
> +static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = {
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Zephyrus"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Strix"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_PRODUCT_FAMILY, "ProArt P16"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_NAME, "GA403U"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_NAME, "GU605M"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_NAME, "RC71L"),
> +		},
> +	},
> +	{ },
> +};
> +#endif
> +
> +#endif	/* __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H */
> diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
> index dbd44d9fbb6f..71c68425b3b9 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -6,6 +6,9 @@
>  #include <linux/types.h>
>  #include <linux/dmi.h>
>  
> +#define ASUS_WMI_MGMT_GUID	"97845ED0-4E6D-11DE-8A39-0800200C9A66"
> +#define ASUS_ACPI_UID_ASUSWMI	"ASUSWMI"
> +
>  /* WMI Methods */
>  #define ASUS_WMI_METHODID_SPEC	        0x43455053 /* BIOS SPECification */
>  #define ASUS_WMI_METHODID_SFBD		0x44424653 /* Set First Boot Device */
> @@ -191,44 +194,4 @@ static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1,
>  }
>  #endif
>  
> -/* To be used by both hid-asus and asus-wmi to determine which controls kbd_brightness */
> -static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = {

After removing this, is dmi.h still necessary?

> -	{
> -		.matches = {
> -			DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Zephyrus"),
> -		},
> -	},
> -	{
> -		.matches = {
> -			DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Strix"),
> -		},
> -	},
> -	{
> -		.matches = {
> -			DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"),
> -		},
> -	},
> -	{
> -		.matches = {
> -			DMI_MATCH(DMI_PRODUCT_FAMILY, "ProArt P16"),
> -		},
> -	},
> -	{
> -		.matches = {
> -			DMI_MATCH(DMI_BOARD_NAME, "GA403U"),
> -		},
> -	},
> -	{
> -		.matches = {
> -			DMI_MATCH(DMI_BOARD_NAME, "GU605M"),
> -		},
> -	},
> -	{
> -		.matches = {
> -			DMI_MATCH(DMI_BOARD_NAME, "RC71L"),
> -		},
> -	},
> -	{ },
> -};
> -
>  #endif	/* __PLATFORM_DATA_X86_ASUS_WMI_H */
> 

-- 
 i.