From: <ryan.wanner@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<claudiu.beznea@tuxon.dev>, <bmasney@redhat.com>,
<alexander.sverdlin@gmail.com>,
<varshini.rajendran@microchip.com>
Cc: <cristian.birsan@microchip.com>,
<balamanikandan.gunasundar@microchip.com>,
<linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
"Ryan Wanner" <Ryan.Wanner@microchip.com>
Subject: [PATCH v5 13/31] clk: at91: sama7d65: switch system clocks to parent_hw and parent_data
Date: Fri, 16 Jan 2026 13:07:06 -0700 [thread overview]
Message-ID: <96e09d47cbff0fb4593d642a1151791e20c15c48.1768512290.git.ryan.wanner@microchip.com> (raw)
In-Reply-To: <cover.1768512290.git.ryan.wanner@microchip.com>
From: Ryan Wanner <Ryan.Wanner@microchip.com>
Switch the system clocks to use parent_hw and parent_data. Having this
allows the driver to conform to the new clk-system API.
The parent registration is after the USBCK registration due to one of
the system clocks being dependent on USBCK.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
---
drivers/clk/at91/sama7d65.c | 36 +++++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 13 deletions(-)
diff --git a/drivers/clk/at91/sama7d65.c b/drivers/clk/at91/sama7d65.c
index 8aea926094d8..0c9d43fa01c1 100644
--- a/drivers/clk/at91/sama7d65.c
+++ b/drivers/clk/at91/sama7d65.c
@@ -537,23 +537,23 @@ static struct {
/*
* System clock description
* @n: clock name
- * @p: clock parent name
+ * @p: clock parent hw
* @id: clock id
*/
-static const struct {
+static struct {
const char *n;
- const char *p;
+ struct clk_hw *parent_hw;
u8 id;
} sama7d65_systemck[] = {
- { .n = "uhpck", .p = "usbck", .id = 6 },
- { .n = "pck0", .p = "prog0", .id = 8, },
- { .n = "pck1", .p = "prog1", .id = 9, },
- { .n = "pck2", .p = "prog2", .id = 10, },
- { .n = "pck3", .p = "prog3", .id = 11, },
- { .n = "pck4", .p = "prog4", .id = 12, },
- { .n = "pck5", .p = "prog5", .id = 13, },
- { .n = "pck6", .p = "prog6", .id = 14, },
- { .n = "pck7", .p = "prog7", .id = 15, },
+ { .n = "uhpck", .id = 6 },
+ { .n = "pck0", .id = 8, },
+ { .n = "pck1", .id = 9, },
+ { .n = "pck2", .id = 10, },
+ { .n = "pck3", .id = 11, },
+ { .n = "pck4", .id = 12, },
+ { .n = "pck5", .id = 13, },
+ { .n = "pck6", .id = 14, },
+ { .n = "pck7", .id = 15, },
};
/* Mux table for programmable clocks. */
@@ -1298,9 +1298,19 @@ static void __init sama7d65_pmc_setup(struct device_node *np)
sama7d65_pmc->pchws[i] = hw;
}
+ /* Set systemck parent hws. */
+ sama7d65_systemck[0].parent_hw = usbck_hw;
+ sama7d65_systemck[1].parent_hw = sama7d65_pmc->pchws[0];
+ sama7d65_systemck[2].parent_hw = sama7d65_pmc->pchws[1];
+ sama7d65_systemck[3].parent_hw = sama7d65_pmc->pchws[2];
+ sama7d65_systemck[4].parent_hw = sama7d65_pmc->pchws[3];
+ sama7d65_systemck[5].parent_hw = sama7d65_pmc->pchws[4];
+ sama7d65_systemck[6].parent_hw = sama7d65_pmc->pchws[5];
+ sama7d65_systemck[7].parent_hw = sama7d65_pmc->pchws[6];
+ sama7d65_systemck[8].parent_hw = sama7d65_pmc->pchws[7];
for (i = 0; i < ARRAY_SIZE(sama7d65_systemck); i++) {
hw = at91_clk_register_system(regmap, sama7d65_systemck[i].n,
- sama7d65_systemck[i].p, NULL,
+ NULL, &AT91_CLK_PD_HW(sama7d65_systemck[i].parent_hw),
sama7d65_systemck[i].id, 0);
if (IS_ERR(hw))
goto err_free;
--
2.43.0
next prev parent reply other threads:[~2026-01-16 20:07 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-16 20:06 [PATCH v5 00/31] clk: at91: add support for parent_data and ryan.wanner
2026-01-16 20:06 ` [PATCH v5 01/31] clk: at91: pmc: add macros for clk_parent_data ryan.wanner
2026-01-31 14:25 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 02/31] clk: at91: pmc: Move macro to header file ryan.wanner
2026-01-31 14:26 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 03/31] clk: at91: sam9x75: switch to parent_hw and parent_data ryan.wanner
2026-01-26 8:51 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 04/31] clk: at91: clk-sam9x60-pll: use clk_parent_data ryan.wanner
2026-01-26 8:53 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 05/31] clk: at91: clk-peripheral: switch to clk_parent_data ryan.wanner
2026-01-26 8:52 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 06/31] clk: at91: clk-main: switch to clk parent data ryan.wanner
2026-01-26 8:52 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 07/31] clk: at91: clk-utmi: use clk_parent_data ryan.wanner
2026-01-26 8:52 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 08/31] clk: at91: clk-master: " ryan.wanner
2026-01-31 14:29 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 09/31] clk: at91: clk-programmable: " ryan.wanner
2026-01-26 8:53 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 10/31] clk: at91: clk-generated: " ryan.wanner
2026-01-30 6:56 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 11/31] clk: at91: clk-usb: add support for clk_parent_data ryan.wanner
2026-01-30 7:06 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 12/31] clk: at91: clk-system: use clk_parent_data ryan.wanner
2026-01-30 7:08 ` claudiu beznea
2026-01-16 20:07 ` ryan.wanner [this message]
2026-01-30 7:14 ` [PATCH v5 13/31] clk: at91: sama7d65: switch system clocks to parent_hw and parent_data claudiu beznea
2026-01-16 20:07 ` [PATCH v5 14/31] clk: at91: clk-pll: add support for parent_hw ryan.wanner
2026-01-30 7:18 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 15/31] clk: at91: clk-audio-pll: " ryan.wanner
2026-01-30 7:21 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 16/31] clk: at91: clk-plldiv: add support for parent_data ryan.wanner
2026-01-31 10:51 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 17/31] clk: at91: clk-h32mx: " ryan.wanner
2026-01-31 10:53 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 18/31] clk: at91: clk-i2s-mux: " ryan.wanner
2026-01-31 10:54 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 19/31] clk: at91: clk-smd: add support for clk_parent_data ryan.wanner
2026-01-31 10:57 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 20/31] clk: at91: clk-slow: add support for parent_data ryan.wanner
2026-01-31 11:00 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 21/31] clk: at91: dt-compat: switch to parent_hw and parent_data ryan.wanner
2026-01-31 11:02 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 22/31] clk: at91: sam9x60: " ryan.wanner
2026-01-31 11:05 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 23/31] clk: at91: sama5d2: " ryan.wanner
2026-01-31 11:11 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 24/31] clk: at91: sama5d3: switch to parent_data and parent_hw ryan.wanner
2026-01-31 11:14 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 25/31] clk: at91: sama5d4: " ryan.wanner
2026-01-17 18:30 ` kernel test robot
2026-01-16 20:07 ` [PATCH v5 26/31] clk: at91: at91sam9x5: " ryan.wanner
2026-01-31 14:04 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 27/31] clk: at91: at91rm9200: switch to parent_hw and parent_data ryan.wanner
2026-01-31 14:13 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 28/31] clk: at91: at91sam9260: " ryan.wanner
2026-01-31 14:16 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 29/31] clk: at91: at91sam9g45: switch to parent_data and parent_hw ryan.wanner
2026-01-31 14:19 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 30/31] clk: at91: at91sam9n12: switch to parent_hw and parent_data ryan.wanner
2026-01-31 14:22 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 31/31] clk: at91: at91sam9rl: switch to clk_parent_data ryan.wanner
2026-01-31 14:24 ` Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=96e09d47cbff0fb4593d642a1151791e20c15c48.1768512290.git.ryan.wanner@microchip.com \
--to=ryan.wanner@microchip.com \
--cc=alexander.sverdlin@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=balamanikandan.gunasundar@microchip.com \
--cc=bmasney@redhat.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=cristian.birsan@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=sboyd@kernel.org \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®