mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Prabhakar <prabhakar.csengg@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH] pinctrl: renesas: rzg2l: Return -EINVAL if the pin doesn't support PIN_CFG_OEN
Date: Thu, 25 Jul 2024 17:39:53 +0300	[thread overview]
Message-ID: <97233c2e-78ff-40a0-b808-6929deff4427@tuxon.dev> (raw)
In-Reply-To: <20240723164744.505233-1-prabhakar.mahadev-lad.rj@bp.renesas.com>



On 23.07.2024 19:47, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Update the rzg2l_pinctrl_pinconf_get() function to return -EINVAL for
> PIN_CONFIG_OUTPUT_ENABLE config if the pin doesn't support the PIN_CFG_OEN
> configuration.
> 
> -EINVAL is a valid error when dumping the pin configurations. Returning
> -EOPNOTSUPP for a pin that does not support PIN_CFG_OEN resulted in the
> message 'ERROR READING CONFIG SETTING 16' being printed during dumping
> pinconf-pins.
> 
> For consistency do similar change in rzg2l_pinctrl_pinconf_set() for
> PIN_CONFIG_OUTPUT_ENABLE config.
> 
> Fixes: a9024a323af2 ("pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions")
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

> ---
>  drivers/pinctrl/renesas/pinctrl-rzg2l.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> index 632180570b70..3ef20f2fa88e 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -1261,7 +1261,9 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
>  		break;
>  
>  	case PIN_CONFIG_OUTPUT_ENABLE:
> -		if (!pctrl->data->oen_read || !(cfg & PIN_CFG_OEN))
> +		if (!(cfg & PIN_CFG_OEN))
> +			return -EINVAL;
> +		if (!pctrl->data->oen_read)
>  			return -EOPNOTSUPP;
>  		arg = pctrl->data->oen_read(pctrl, _pin);
>  		if (!arg)
> @@ -1402,7 +1404,9 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
>  
>  		case PIN_CONFIG_OUTPUT_ENABLE:
>  			arg = pinconf_to_config_argument(_configs[i]);
> -			if (!pctrl->data->oen_write || !(cfg & PIN_CFG_OEN))
> +			if (!(cfg & PIN_CFG_OEN))
> +				return -EINVAL;
> +			if (!pctrl->data->oen_write)
>  				return -EOPNOTSUPP;
>  			ret = pctrl->data->oen_write(pctrl, _pin, !!arg);
>  			if (ret)

  reply	other threads:[~2024-07-25 14:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-23 16:47 Prabhakar
2024-07-25 14:39 ` claudiu beznea [this message]
2024-07-29  7:58 ` Paul Barker
2024-08-01 15:19 ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=97233c2e-78ff-40a0-b808-6929deff4427@tuxon.dev \
    --to=claudiu.beznea@tuxon.dev \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=fabrizio.castro.jz@renesas.com \
    --cc=geert+renesas@glider.be \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=prabhakar.csengg@gmail.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®