mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: HOYOUNG SEO <hy50.seo@samsung.com>
To: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	bvanassche@acm.org, mkp@kernel.org, martin.petersen@oracle.com,
	stanleyjhu@google.com, peter.wang@mediatek.com,
	alim.akhtar@samsung.com, kwangwon.min@samsung.com,
	kwmad.kim@samsung.com, cpgsproxy1@samsung.com,
	h10.kim@samsung.com
Cc: HOYOUNG SEO <hy50.seo@samsung.com>
Subject: [PATCH v9 2/3] scsi: ufs: core: Hold host_sem in ufshcd_wl_poweroff()
Date: Tue, 10 Nov 2026 11:03:14 +0900	[thread overview]
Message-ID: <973576304.21794277202839.JavaMail.epsvc@epcpadp1new> (raw)
In-Reply-To: <cover.1794275305.git.hy50.seo@samsung.com>

ufshcd_wl_suspend() takes hba->host_sem and ufshcd_wl_resume() releases
it, which serializes the error handler against system suspend and
resume. ufshcd_wl_poweroff(), the hibernation poweroff callback, also
suspends the device with UFS_SHUTDOWN_PM but does not take host_sem. An
error handler that runs in the meantime can reset the link concurrently
with __ufshcd_wl_suspend().

It also leaves host_sem unbalanced: if hibernation is aborted after
ufshcd_wl_poweroff() has been called, ufshcd_wl_resume() is called as
the .restore callback and releases host_sem, which was not acquired.

Make ufshcd_wl_poweroff() behave like ufshcd_wl_suspend() and keep
holding host_sem. It is released by ufshcd_wl_resume() if hibernation is
aborted. If __ufshcd_wl_suspend() fails, release host_sem and return the
error as ufshcd_wl_suspend() does, otherwise the error handler, which
waits for host_sem, would block forever.

This changes the behavior on failure: the error is now returned from the
.poweroff callback, which aborts hibernation, instead of being ignored.

Do not use hba->shutting_down here: it makes ufs_mtk_system_suspend(),
which is also the .poweroff callback of the MediaTek host controller,
fail with -EBUSY, and nothing clears it when hibernation is aborted.

Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: HOYOUNG SEO <hy50.seo@samsung.com>
---
 drivers/ufs/core/ufshcd.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 3b5580ac390c..0d86c67f0b1a 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -11573,9 +11573,15 @@ static int ufshcd_wl_poweroff(struct device *dev)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 	struct ufs_hba *hba = shost_priv(sdev->host);
+	int ret;
 
-	__ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM);
-	return 0;
+	/* Released by ufshcd_wl_resume() if hibernation is aborted. */
+	down(&hba->host_sem);
+	ret = __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM);
+	if (ret)
+		up(&hba->host_sem);
+
+	return ret;
 }
 #endif
 
-- 
2.34.1



  parent reply	other threads:[~2026-11-10  2:20 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1794275305.git.hy50.seo@samsung.com>
     [not found] ` <CGME20261110020746epcas2p2ed2c3b150d2ecbf810658264841e790e@epcas2p2.samsung.com>
2026-11-10  2:03   ` [PATCH v9 1/3] scsi: ufs: core: Clear saved errors in ufshcd_link_recovery() HOYOUNG SEO
     [not found] ` <CGME20261110020747epcas2p20410190486c9b48b4b2a4e9d8a4c2292@epcas2p2.samsung.com>
2026-11-10  2:03   ` HOYOUNG SEO [this message]
     [not found] ` <CGME20261110020748epcas2p25076a34f183116ca4d8714dacf214958@epcas2p2.samsung.com>
2026-11-10  2:03   ` [PATCH v9 3/3] scsi: ufs: core: Limit early link recovery in the error handler to runtime PM HOYOUNG SEO

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=973576304.21794277202839.JavaMail.epsvc@epcpadp1new \
    --to=hy50.seo@samsung.com \
    --cc=alim.akhtar@samsung.com \
    --cc=bvanassche@acm.org \
    --cc=cpgsproxy1@samsung.com \
    --cc=h10.kim@samsung.com \
    --cc=kwangwon.min@samsung.com \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=mkp@kernel.org \
    --cc=peter.wang@mediatek.com \
    --cc=stanleyjhu@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®