Re: [PATCH v3 1/1] pps: clients: gpio: Bypass edge's direction check when not needed

[Bastien Curutchet <bastien.curutchet@bootlin.com>]

Hi Rodolfo

On 4/25/24 14:42, Rodolfo Giometti wrote:
> On 25/04/24 14:28, Bastien Curutchet wrote:
>> In the IRQ handler, the GPIO's state is read to verify the direction of
>> the edge that triggered the interruption before generating the PPS event.
>> If a pulse is too short, the GPIO line can reach back its original state
>> before this verification and the PPS event is lost.
>>
>> This check is needed when info->capture_clear is set because it needs
>> interruptions on both rising and falling edges. When info->capture_clear
>> is not set, interruption is triggered by one edge only so this check can
>> be omitted.
>>
>> Add a warning if irq_handler is left without triggering any PPS event.
>> Bypass the edge's direction verification when info->capture_clear is not
>> set.
>>
>> Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
> 
> Acked-by: Rodolfo Giometti <giometti@enneenne.com>
> 

I don't think I've received any updates since you acked this. Is there 
something missing before the patch can be applied?

Best regards,
Bastien