mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nicolin Chen <nicolinc@nvidia.com>
To: <will@kernel.org>, <jgg@nvidia.com>
Cc: <robin.murphy@arm.com>, <joro@8bytes.org>, <praan@google.com>,
	<kevin.tian@intel.com>, <smostafa@google.com>,
	<linux-arm-kernel@lists.infradead.org>, <iommu@lists.linux.dev>,
	<linux-kernel@vger.kernel.org>, <jamien@nvidia.com>,
	<kas@kernel.org>, Cristian Prundeanu <cpru@amazon.com>,
	Breno Leitao <leitao@kernel.org>, <xueshuai@linux.alibaba.com>,
	<john.garry@arm.com>
Subject: [PATCH v12 05/12] iommu/arm-smmu-v3: Add ARM_SMMU_FEAT_EVTQ for the event queue
Date: Sun, 1 Nov 2026 21:19:13 -0800	[thread overview]
Message-ID: <9744e1695bc597bd9ddb88ace69ffb584b803425.1793593923.git.nicolinc@nvidia.com> (raw)
In-Reply-To: <cover.1793593923.git.nicolinc@nvidia.com>

The driver programs and enables the event queue unconditionally, while the
PRI queue has an ARM_SMMU_FEAT_PRI gating each of its touch points. Yet a
kdump kernel wants to leave both of the queues alone, which would take an
is_kdump_kernel() test at every one of those places.

Add an ARM_SMMU_FEAT_EVTQ that the probe always sets, as the event queue is
architecturally mandatory, and gate the queue's allocation, its interrupt,
its MSI vector, and its CR0 and IRQ_CTRL enables on it. A subsequent change
will turn the queue off in a single place.

No functional change intended.

Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Breno Leitao <leitao@kernel.org>
Tested-by: Cristian Prundeanu <cpru@amazon.com>
Tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h |  1 +
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 82 +++++++++++++--------
 2 files changed, 54 insertions(+), 29 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
index bce592fff0b12..aef12d8de9f05 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
@@ -979,6 +979,7 @@ struct arm_smmu_device {
 #define ARM_SMMU_FEAT_BBML2		(1 << 24)
 #define ARM_SMMU_FEAT_HAFT		(1 << 25)
 #define ARM_SMMU_FEAT_DS		(1 << 26)
+#define ARM_SMMU_FEAT_EVTQ		(1 << 27)
 	u32				features;
 
 #define ARM_SMMU_OPT_SKIP_PREFETCH	(1 << 0)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index a312984bc6a0e..b1222d6f771cf 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2374,7 +2374,8 @@ static irqreturn_t arm_smmu_combined_irq_thread(int irq, void *dev)
 {
 	struct arm_smmu_device *smmu = dev;
 
-	arm_smmu_evtq_thread(irq, dev);
+	if (smmu->features & ARM_SMMU_FEAT_EVTQ)
+		arm_smmu_evtq_thread(irq, dev);
 	if (smmu->features & ARM_SMMU_FEAT_PRI)
 		arm_smmu_priq_thread(irq, dev);
 
@@ -2383,7 +2384,12 @@ static irqreturn_t arm_smmu_combined_irq_thread(int irq, void *dev)
 
 static irqreturn_t arm_smmu_combined_irq_handler(int irq, void *dev)
 {
-	arm_smmu_gerror_handler(irq, dev);
+	struct arm_smmu_device *smmu = dev;
+	irqreturn_t ret = arm_smmu_gerror_handler(irq, dev);
+
+	/* Without either queue, the thread would have nothing to drain */
+	if (!(smmu->features & (ARM_SMMU_FEAT_EVTQ | ARM_SMMU_FEAT_PRI)))
+		return ret;
 	return IRQ_WAKE_THREAD;
 }
 
@@ -4756,11 +4762,14 @@ static int arm_smmu_init_queues(struct arm_smmu_device *smmu)
 		return ret;
 
 	/* evtq */
-	ret = arm_smmu_init_one_queue(smmu, &smmu->evtq.q, smmu->page1,
-				      ARM_SMMU_EVTQ_PROD, ARM_SMMU_EVTQ_CONS,
-				      EVTQ_ENT_DWORDS, "evtq");
-	if (ret)
-		return ret;
+	if (smmu->features & ARM_SMMU_FEAT_EVTQ) {
+		ret = arm_smmu_init_one_queue(smmu, &smmu->evtq.q, smmu->page1,
+					      ARM_SMMU_EVTQ_PROD,
+					      ARM_SMMU_EVTQ_CONS,
+					      EVTQ_ENT_DWORDS, "evtq");
+		if (ret)
+			return ret;
+	}
 
 	if ((smmu->features & ARM_SMMU_FEAT_SVA) &&
 	    (smmu->features & ARM_SMMU_FEAT_STALLS)) {
@@ -4955,7 +4964,8 @@ static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
 	unsigned int nvec = 0;
 	int ret;
 
-	arm_smmu_setup_msi_vector(smmu, vec, &nvec, EVTQ_MSI_INDEX);
+	if (smmu->features & ARM_SMMU_FEAT_EVTQ)
+		arm_smmu_setup_msi_vector(smmu, vec, &nvec, EVTQ_MSI_INDEX);
 	arm_smmu_setup_msi_vector(smmu, vec, &nvec, GERROR_MSI_INDEX);
 	if (smmu->features & ARM_SMMU_FEAT_PRI)
 		arm_smmu_setup_msi_vector(smmu, vec, &nvec, PRIQ_MSI_INDEX);
@@ -4991,16 +5001,20 @@ static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
 	arm_smmu_setup_msis(smmu);
 
 	/* Request interrupt lines */
-	irq = smmu->evtq.q.irq;
-	if (irq) {
-		ret = devm_request_threaded_irq(smmu->dev, irq, NULL,
-						arm_smmu_evtq_thread,
-						IRQF_ONESHOT,
-						"arm-smmu-v3-evtq", smmu);
-		if (ret < 0)
-			dev_warn(smmu->dev, "failed to enable evtq irq\n");
-	} else {
-		dev_warn(smmu->dev, "no evtq irq - events will not be reported!\n");
+	if (smmu->features & ARM_SMMU_FEAT_EVTQ) {
+		irq = smmu->evtq.q.irq;
+		if (irq) {
+			ret = devm_request_threaded_irq(smmu->dev, irq, NULL,
+							arm_smmu_evtq_thread,
+							IRQF_ONESHOT,
+							"arm-smmu-v3-evtq", smmu);
+			if (ret < 0)
+				dev_warn(smmu->dev,
+					 "failed to enable evtq irq\n");
+		} else {
+			dev_warn(smmu->dev,
+				 "no evtq irq - events will not be reported!\n");
+		}
 	}
 
 	irq = smmu->gerr_irq;
@@ -5033,7 +5047,7 @@ static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
 static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
 {
 	int ret, irq;
-	u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
+	u32 irqen_flags = IRQ_CTRL_GERROR_IRQEN;
 
 	/* Disable IRQs first */
 	ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
@@ -5059,6 +5073,8 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
 	} else
 		arm_smmu_setup_unique_irqs(smmu);
 
+	if (smmu->features & ARM_SMMU_FEAT_EVTQ)
+		irqen_flags |= IRQ_CTRL_EVTQ_IRQEN;
 	if (smmu->features & ARM_SMMU_FEAT_PRI)
 		irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
 
@@ -5177,16 +5193,21 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu)
 		smmu, arm_smmu_make_cmd_op(CMDQ_OP_TLBI_NSNH_ALL));
 
 	/* Event queue */
-	writeq_relaxed(smmu->evtq.q.q_base, smmu->base + ARM_SMMU_EVTQ_BASE);
-	writel_relaxed(smmu->evtq.q.llq.prod, smmu->page1 + ARM_SMMU_EVTQ_PROD);
-	writel_relaxed(smmu->evtq.q.llq.cons, smmu->page1 + ARM_SMMU_EVTQ_CONS);
-
-	enables |= CR0_EVTQEN;
-	ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
-				      ARM_SMMU_CR0ACK);
-	if (ret) {
-		dev_err(smmu->dev, "failed to enable event queue\n");
-		return ret;
+	if (smmu->features & ARM_SMMU_FEAT_EVTQ) {
+		writeq_relaxed(smmu->evtq.q.q_base,
+			       smmu->base + ARM_SMMU_EVTQ_BASE);
+		writel_relaxed(smmu->evtq.q.llq.prod,
+			       smmu->page1 + ARM_SMMU_EVTQ_PROD);
+		writel_relaxed(smmu->evtq.q.llq.cons,
+			       smmu->page1 + ARM_SMMU_EVTQ_CONS);
+
+		enables |= CR0_EVTQEN;
+		ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
+					      ARM_SMMU_CR0ACK);
+		if (ret) {
+			dev_err(smmu->dev, "failed to enable event queue\n");
+			return ret;
+		}
 	}
 
 	/* PRI queue */
@@ -5334,6 +5355,9 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 	u32 reg;
 	bool coherent = smmu->features & ARM_SMMU_FEAT_COHERENCY;
 
+	/* The event queue is architecturally mandatory, unlike the PRI queue */
+	smmu->features |= ARM_SMMU_FEAT_EVTQ;
+
 	/* IDR0 */
 	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR0);
 
-- 
2.43.0


  parent reply	other threads:[~2026-11-02  5:19 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-02  5:19 [PATCH v12 00/12] iommu/arm-smmu-v3: Adopt the crashed kernel's stream table for kdump Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 01/12] iommu: Pass in NULL old_domain when attaching a deferred device Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 02/12] iommu/arm-smmu-v3: Init the vmid_map ida before the stream table setup Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 03/12] iommu/arm-smmu-v3: Make the ASID space per SMMU instance Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 04/12] iommu/arm-smmu-v3: Pack the MSI vectors of the used sources Nicolin Chen
2026-11-02  5:19 ` Nicolin Chen [this message]
2026-11-02  5:19 ` [PATCH v12 06/12] iommu/arm-smmu-v3: Disable the EVTQ and the PRIQ in a kdump kernel Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 07/12] iommu/arm-smmu-v3: Add ARM_SMMU_OPT_KDUMP_ADOPT for " Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 08/12] iommu/arm-smmu-v3-kexec: Reserve crashed kernel's ASIDs and VMIDs Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 09/12] iommu/arm-smmu-v3-kexec: Implement is_attach_deferred() Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 10/12] iommu/arm-smmu-v3: Retain CR0_SMMUEN during kdump device reset Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 11/12] iommu/arm-smmu-v3: Skip RMR bypass for kdump adoption Nicolin Chen
2026-11-02  5:19 ` [PATCH v12 12/12] iommu/arm-smmu-v3: Detect ARM_SMMU_OPT_KDUMP_ADOPT in probe() Nicolin Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9744e1695bc597bd9ddb88ace69ffb584b803425.1793593923.git.nicolinc@nvidia.com \
    --to=nicolinc@nvidia.com \
    --cc=cpru@amazon.com \
    --cc=iommu@lists.linux.dev \
    --cc=jamien@nvidia.com \
    --cc=jgg@nvidia.com \
    --cc=john.garry@arm.com \
    --cc=joro@8bytes.org \
    --cc=kas@kernel.org \
    --cc=kevin.tian@intel.com \
    --cc=leitao@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=praan@google.com \
    --cc=robin.murphy@arm.com \
    --cc=smostafa@google.com \
    --cc=will@kernel.org \
    --cc=xueshuai@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®