mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ming Qian(OSS)" <ming.qian@oss.nxp.com>
To: Frank Li <Frank.li@nxp.com>
Cc: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
	nicolas@ndufresne.ca, sebastian.fricke@collabora.com,
	shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	xiahong.bao@nxp.com, eagle.zhou@nxp.com, imx@lists.linux.dev,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 1/2] media: amphion: Reduce decoding latency for HEVC decoder
Date: Mon, 31 Mar 2025 10:26:57 +0800	[thread overview]
Message-ID: <9747b508-ad9a-427d-b35d-9bb55952ad62@oss.nxp.com> (raw)
In-Reply-To: <Z+aw6bFdwTsxwLTa@lizhi-Precision-Tower-5810>

Hi Frank,

On 2025/3/28 22:23, Frank Li wrote:
> On Fri, Mar 28, 2025 at 02:48:16PM +0800, ming.qian@oss.nxp.com wrote:
>> From: Ming Qian <ming.qian@oss.nxp.com>
>>
>> The amphion decoder firmware supports a low latency flush mode for the
>> HEVC format since v1.9.0. This feature, which is enabled when the
>> display delay is set to 0, can help to reduce the decoding latency by
>> appending some padding data to every frame.
>>
>> Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
>> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
>> ---
>> v4
>> - Add CHECK_VERSION macro
>> v3
>> - Improve commit message as recommended
>> v2
>> - Improve commit message
>> - Add firmware version check
>>
>>   drivers/media/platform/amphion/vpu_malone.c | 24 ++++++++++++++++++---
>>   1 file changed, 21 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/platform/amphion/vpu_malone.c b/drivers/media/platform/amphion/vpu_malone.c
>> index 5c6b2a841b6f..88f8c16a451e 100644
>> --- a/drivers/media/platform/amphion/vpu_malone.c
>> +++ b/drivers/media/platform/amphion/vpu_malone.c
>> @@ -68,6 +68,12 @@
>>
>>   #define MALONE_DEC_FMT_RV_MASK			BIT(21)
>>
>> +#define MALONE_VERSION_MASK			0xFFFFF
>> +#define MALONE_VERSION(maj, min, inc)		\
>> +		((((maj) << 16) | ((min) << 16) | (inc)) & MALONE_VERSION_MASK)
>> +#define CHECK_VERSION(iface, maj, min)		\
>> +		(((iface)->fw_version & MALONE_VERSION_MASK) >= MALONE_VERSION(maj, min, 0))
>> +
> 
> Suggest use FIELD_PREP FILED_GET macro because it can check input value
> exceed the range.
> 
> #define FIELD_PREP(_mask, _val)						\
> 	({								\
> 		__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: ");	\
> 
> 		^^^^
> 
> 		((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask);	\
> 	})
> 
> Frank

Sure, I'll apply it in V5

> 
>>   enum vpu_malone_stream_input_mode {
>>   	INVALID_MODE = 0,
>>   	FRAME_LVL,
>> @@ -332,6 +338,8 @@ struct vpu_dec_ctrl {
>>   	u32 buf_addr[VID_API_NUM_STREAMS];
>>   };
>>
>> +static const struct malone_padding_scode *get_padding_scode(u32 type, u32 fmt);
>> +
>>   u32 vpu_malone_get_data_size(void)
>>   {
>>   	return sizeof(struct vpu_dec_ctrl);
>> @@ -654,9 +662,15 @@ static int vpu_malone_set_params(struct vpu_shared_addr *shared,
>>   		hc->jpg[instance].jpg_mjpeg_interlaced = 0;
>>   	}
>>
>> -	hc->codec_param[instance].disp_imm = params->display_delay_enable ? 1 : 0;
>> -	if (malone_format != MALONE_FMT_AVC)
>> +	if (params->display_delay_enable &&
>> +	    get_padding_scode(SCODE_PADDING_BUFFLUSH, params->codec_format))
>> +		hc->codec_param[instance].disp_imm = 1;
>> +	else
>>   		hc->codec_param[instance].disp_imm = 0;
>> +
>> +	if (params->codec_format == V4L2_PIX_FMT_HEVC && !CHECK_VERSION(iface, 1, 9))
>> +		hc->codec_param[instance].disp_imm = 0;
>> +
>>   	hc->codec_param[instance].dbglog_enable = 0;
>>   	iface->dbglog_desc.level = 0;
>>
>> @@ -1024,6 +1038,7 @@ static const struct malone_padding_scode padding_scodes[] = {
>>   	{SCODE_PADDING_EOS,      V4L2_PIX_FMT_JPEG,        {0x0, 0x0}},
>>   	{SCODE_PADDING_BUFFLUSH, V4L2_PIX_FMT_H264,        {0x15010000, 0x0}},
>>   	{SCODE_PADDING_BUFFLUSH, V4L2_PIX_FMT_H264_MVC,    {0x15010000, 0x0}},
>> +	{SCODE_PADDING_BUFFLUSH, V4L2_PIX_FMT_HEVC,        {0x3e010000, 0x20}},
>>   };
>>
>>   static const struct malone_padding_scode padding_scode_dft = {0x0, 0x0};
>> @@ -1058,8 +1073,11 @@ static int vpu_malone_add_padding_scode(struct vpu_buffer *stream_buffer,
>>   	int ret;
>>
>>   	ps = get_padding_scode(scode_type, pixelformat);
>> -	if (!ps)
>> +	if (!ps) {
>> +		if (scode_type == SCODE_PADDING_BUFFLUSH)
>> +			return 0;
>>   		return -EINVAL;
>> +	}
>>
>>   	wptr = readl(&str_buf->wptr);
>>   	if (wptr < stream_buffer->phys || wptr > stream_buffer->phys + stream_buffer->length)
>> --
>> 2.43.0-rc1
>>

      reply	other threads:[~2025-03-31  2:27 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-28  6:48 ming.qian
2025-03-28  6:48 ` [PATCH v4 2/2] media: amphion: Add a frame flush mode for decoder ming.qian
2025-03-28 14:26   ` Frank Li
2025-03-31  2:37     ` Ming Qian(OSS)
2025-03-28 14:23 ` [PATCH v4 1/2] media: amphion: Reduce decoding latency for HEVC decoder Frank Li
2025-03-31  2:26   ` Ming Qian(OSS) [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9747b508-ad9a-427d-b35d-9bb55952ad62@oss.nxp.com \
    --to=ming.qian@oss.nxp.com \
    --cc=Frank.li@nxp.com \
    --cc=eagle.zhou@nxp.com \
    --cc=festevam@gmail.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=nicolas@ndufresne.ca \
    --cc=s.hauer@pengutronix.de \
    --cc=sebastian.fricke@collabora.com \
    --cc=shawnguo@kernel.org \
    --cc=xiahong.bao@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®