From: Lyude Paul <lyude@redhat.com>
To: Karol Herbst <kherbst@redhat.com>, Lukas Wunner <lukas@wunner.de>
Cc: nouveau <nouveau@lists.freedesktop.org>,
Linux PCI <linux-pci@vger.kernel.org>,
Daniel Drake <drake@endlessm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Aaron Plattner <aplattner@nvidia.com>,
Peter Wu <peter@lekensteyn.nl>,
Ilia Mirkin <imirkin@alum.mit.edu>,
Maik Freudenberg <hhfeuer@gmx.de>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Revert "PCI: Enable NVIDIA HDA controllers"
Date: Wed, 31 Jul 2019 20:50:20 -0400 [thread overview]
Message-ID: <97d4312d883f3c031c5a6144a2f5f5dd74dfe4df.camel@redhat.com> (raw)
In-Reply-To: <b27614151184f29bb147786933cb424fddb82a23.camel@redhat.com>
On Wed, 2019-07-31 at 17:35 -0400, Lyude Paul wrote:
> On Wed, 2019-07-31 at 23:26 +0200, Karol Herbst wrote:
> > On Wed, Jul 31, 2019 at 11:18 PM Lukas Wunner <lukas@wunner.de> wrote:
> > > On Wed, Jul 31, 2019 at 04:19:27PM -0400, Lyude Paul wrote:
> > > > While this fixes audio for a number of users, this commit has the
> > > > sideaffect of breaking the BIOS workaround that's required to make the
> > > > GPU on the nvidia P50 work, by causing the GPU's PCI device function
> > > > to
> > > > stop working after it's been set to multifunction mode.
> > >
> > > This is missing a reference to the commit introducing the P50 quirk,
> > > which is e0547c81bfcf ("PCI: Reset Lenovo ThinkPad P50 nvgpu at boot
> > > if necessary").
> > >
> > > Please describe in more detail how the GPU's PCI function stops working.
> > > Does it respond with "all ones" when accessing MMIO?
> > > Do MMIO accesses cause the system to hang?
> > >
> > > Could you provide lspci -vvxx output for the GPU and its associated
> > > HDA controller with and without b516ea586d71?
> > >
> > > Does this machine have external display connectors via which audio
> > > can be streamed?
> > >
> > >
> > > > I'm not really holding my breath on this patch to being accepted:
> > > > there's a good chance there's a better solution for this (and I'm
> > > > going
> > > > to continue investigating for one after sending this patch), this is
> > > > more just to start a conversation on what the proper way to fix this
> > > > is.
> > >
> > > Posting as an RFC might have been more appropriate then.
> > >
> >
> > no, a revert is actually appropriate. If a commit fixes something,
> > but breaks something else, it gets either reverted or fixed. If nobody
> > fixes it, then revert it is.
>
> To answer Lukas's question btw: most of the details on how things break are
> back in the original commit (sorry for forgetting the reference!), there's a
> _lot_ of explanation there that I'd rather not retype, so just refer back to
> the commit and bug @ https://bugs.freedesktop.org/show_bug.cgi?id=75985
>
> Additionally, there was some extra discussion providing some more detail in
> the email thread that I had with Bjorn:
>
> https://lkml.org/lkml/2019/2/12/1172
>
> As for how this commit breaks the workaround: it seems that when we enable
> the
> HDA controller and put the GPU into multifunction mode, the function-level
> reset stops working and thus we can't reset the GPU anymore. Currently I can
> see a couple of solutions (again, please feel free to suggest more!):
>
> * Just revert the commit. We should do this if necessary, but of course I'd
> much rather try finding a fix first
> * Disable the HDA controller temporarily when a GPU reset is neded in
> quirk_reset_lenovo_thinkpad_p50_nvgpu(), then call the function level
> reset, then re-enable the HDA controller. I have no idea if this actually
> works yet, but I'm about to try this on my system
> * Get quirk_reset_lenovo_thinkpad_p50_nvgpu() to run before
> quirk_nvidia_hda(). This would probably be fine, but we would need to
> rework some stuff in the PCI subsystem (maybe it already has a way to do
> this? haven't checked yet) so that we could perform an flr probe early
> enough to perform the quirk
Good news! After some investigation looks like that function level reset
actually does work, just that after we put it in multifunction mode
pci_parent_bus_reset() sees multiple devices on the bus and returns -ENOTTY as
a result. So I should definitely be able to come up with a fix for this other
then reverting this :). Will send out patches soon
> > > > So, I'm kind of confused about why exactly this was implemented as an
> > > > early boot quirk in the first place. If we're seeing the GPU's PCI
> > > > device, we already know the GPU is there. Shouldn't we be able to
> > > > check
> > > > for the existence of the HDA device once we probe the GPU in nouveau?
> > >
> > > I think a motivation to keep this generic was to make it work with
> > > other drivers besides nouveau, specifically Nvidia's proprietary driver.
> > > nouveau might not even be enabled.
> > >
> > >
> > > > that still doesn't explain why this was implemented as an early quirk
> > >
> > > This isn't an early quirk. Those live in arch/x86/kernel/early-
> > > quirks.c.
> > > This is just a PCI quirk executed on device enumeration and on resume.
> > > Devices aren't necessarily enumerated only on boot, e.g. think
> > > Thunderbolt.
> > >
> > > Thanks,
> > >
> > > Lukas
--
Cheers,
Lyude Paul
prev parent reply other threads:[~2019-08-01 0:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-31 20:19 Lyude Paul
2019-07-31 20:24 ` Lyude Paul
2019-07-31 21:18 ` Lukas Wunner
2019-07-31 21:26 ` Karol Herbst
2019-07-31 21:35 ` Lyude Paul
2019-08-01 0:50 ` Lyude Paul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=97d4312d883f3c031c5a6144a2f5f5dd74dfe4df.camel@redhat.com \
--to=lyude@redhat.com \
--cc=aplattner@nvidia.com \
--cc=bhelgaas@google.com \
--cc=drake@endlessm.com \
--cc=hhfeuer@gmx.de \
--cc=imirkin@alum.mit.edu \
--cc=kherbst@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=nouveau@lists.freedesktop.org \
--cc=peter@lekensteyn.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®