From: Alex Elder <elder@ieee.org>
To: Florian Fainelli <f.fainelli@gmail.com>,
Alex Elder <elder@linaro.org>,
davem@davemloft.net, kuba@kernel.org
Cc: bjorn.andersson@linaro.org, evgreen@chromium.org,
cpratapa@codeaurora.org, subashab@codeaurora.org,
elder@kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v2 2/4] net: ipa: use upper_32_bits()
Date: Thu, 18 Mar 2021 11:24:14 -0500 [thread overview]
Message-ID: <982ded1e-b8da-d017-16bf-1a0d4bb46246@ieee.org> (raw)
In-Reply-To: <75a8c09b-783a-6d05-2e56-02bd02ff3ff0@gmail.com>
On 3/18/21 11:03 AM, Florian Fainelli wrote:
>
>
> On 3/18/2021 6:51 AM, Alex Elder wrote:
>> Use upper_32_bits() to extract the high-order 32 bits of a DMA
>> address. This avoids doing a 32-position shift on a DMA address
>> if it happens not to be 64 bits wide.
>>
>> Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
>> Signed-off-by: Alex Elder <elder@linaro.org>
>> ---
>> v2: - Switched to use the existing function, as suggested by Florian.
>>
>> drivers/net/ipa/gsi.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
>> index 2119367b93ea9..82c5a0d431ee5 100644
>> --- a/drivers/net/ipa/gsi.c
>> +++ b/drivers/net/ipa/gsi.c
>> @@ -711,7 +711,7 @@ static void gsi_evt_ring_program(struct gsi *gsi, u32 evt_ring_id)
>> val = evt_ring->ring.addr & GENMASK(31, 0);
>
> Did you want to introduce another patch to use lower_32_bits() for the
> assignment above?
Bah... Yes, I should have done that. I was really just
focused on the new function I created and didn't need
to. I'll do as you suggest.
I'll also see if I do that anywhere else in the driver
and will use these functions as well if appropriate.
I'll do so in the same patch 2 of version 3.
Thanks Florian.
-Alex
>
>> iowrite32(val, gsi->virt + GSI_EV_CH_E_CNTXT_2_OFFSET(evt_ring_id));
>>
>> - val = evt_ring->ring.addr >> 32;
>> + val = upper_32_bits(evt_ring->ring.addr);
>> iowrite32(val, gsi->virt + GSI_EV_CH_E_CNTXT_3_OFFSET(evt_ring_id));
>>
>> /* Enable interrupt moderation by setting the moderation delay */
>> @@ -819,7 +819,7 @@ static void gsi_channel_program(struct gsi_channel *channel, bool doorbell)
>> val = channel->tre_ring.addr & GENMASK(31, 0);
>
> And likewise?
>
>> iowrite32(val, gsi->virt + GSI_CH_C_CNTXT_2_OFFSET(channel_id));
>>
>> - val = channel->tre_ring.addr >> 32;
>> + val = upper_32_bits(channel->tre_ring.addr);
>> iowrite32(val, gsi->virt + GSI_CH_C_CNTXT_3_OFFSET(channel_id));
>>
>> /* Command channel gets low weighted round-robin priority */
>>
>
next prev parent reply other threads:[~2021-03-18 16:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-18 13:51 [PATCH net-next v2 0/4] net: ipa: support 32-bit targets Alex Elder
2021-03-18 13:51 ` [PATCH net-next v2 1/4] net: ipa: fix assumptions about DMA address size Alex Elder
2021-03-18 13:51 ` [PATCH net-next v2 2/4] net: ipa: use upper_32_bits() Alex Elder
2021-03-18 16:03 ` Florian Fainelli
2021-03-18 16:24 ` Alex Elder [this message]
2021-03-18 13:51 ` [PATCH net-next v2 3/4] net: ipa: fix table alignment requirement Alex Elder
2021-03-18 13:51 ` [PATCH net-next v2 4/4] net: ipa: relax 64-bit build requirement Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=982ded1e-b8da-d017-16bf-1a0d4bb46246@ieee.org \
--to=elder@ieee.org \
--cc=bjorn.andersson@linaro.org \
--cc=cpratapa@codeaurora.org \
--cc=davem@davemloft.net \
--cc=elder@kernel.org \
--cc=elder@linaro.org \
--cc=evgreen@chromium.org \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=subashab@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®