Re: [PATCH] ARM: dts: qcom-pma8084: fix vadc channel node names

[Neil Armstrong <neil.armstrong@linaro.org>]

On 25/09/2022 22:21, Luca Weiss wrote:
> Node names for the channel are supposed to be adc-chan@REG.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>   arch/arm/boot/dts/qcom-pma8084.dtsi | 17 +++++++++++------
>   1 file changed, 11 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
> index e77602e9f95c..7ad573c7b4ac 100644
> --- a/arch/arm/boot/dts/qcom-pma8084.dtsi
> +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
> @@ -64,22 +64,27 @@ pma8084_vadc: adc@3100 {
>   			#size-cells = <0>;
>   			#io-channel-cells = <1>;
>   
> -			die_temp {
> +			adc-chan@8 {
>   				reg = <VADC_DIE_TEMP>;
>   			};
> -			ref_625mv {
> +
> +			adc-chan@9 {
>   				reg = <VADC_REF_625MV>;
>   			};
> -			ref_1250v {
> +
> +			adc-chan@10 {
>   				reg = <VADC_REF_1250MV>;
>   			};
> -			ref_buf_625mv {
> +
> +			adc-chan@12 {
>   				reg = <VADC_SPARE1>;
>   			};
> -			ref_gnd {
> +
> +			adc-chan@14 {
>   				reg = <VADC_GND_REF>;
>   			};
> -			ref_vdd {
> +
> +			adc-chan@15 {
>   				reg = <VADC_VDD_VADC>;
>   			};
>   		};

I don't see where this is required, bindings doesn't mandate this naming:

patternProperties:

    "^.*@[0-9a-f]+$":
Neil