Re: [PATCH 05/25] dt-bindings: leds: Add function and color properties

[Dan Murphy <dmurphy@ti.com>]

On 3/10/19 1:28 PM, Jacek Anaszewski wrote:
> Introduce dedicated properties for conveying information about
> LED function and color. Mark old "label" property as deprecated.
> 
> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Baolin Wang <baolin.wang@linaro.org>
> Cc: Daniel Mack <daniel@zonque.org>
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleh Kravchenko <oleg@kaa.org.ua>
> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Simon Shields <simon@lineageos.org>
> ---
>  Documentation/devicetree/bindings/leds/common.txt | 55 +++++++++++++++++++----
>  1 file changed, 47 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index aa1399814a2a..3402b0e1cec9 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -10,14 +10,23 @@ can influence the way of the LED device initialization, the LED components
>  have to be tightly coupled with the LED device binding. They are represented
>  by child nodes of the parent LED device binding.
>  
> +
>  Optional properties for child nodes:
>  - led-sources : List of device current outputs the LED is connected to. The
>  		outputs are identified by the numbers that must be defined
>  		in the LED device binding documentation.
> +- function: LED functon. Use one of the LED_FUNCTION_* prefixed definitions
> +	    from the header include/dt-bindings/leds/common.h.
> +	    If there is no matching LED_FUNCTION available, add a new one.
> +- color : Color of the LED. Use one of the LED_COLOR_NAME_* prefixed definitions
> +	    from the header include/dt-bindings/leds/common.h.
> +	    If there is no matching LED_COLOR_NAME available, add a new one.
> +

I am assuming multi color can re-use this property as well?

>  - label : The label for this LED. If omitted, the label is taken from the node
>  	  name (excluding the unit address). It has to uniquely identify
>  	  a device, i.e. no other LED class device can be assigned the same
> -	  label.
> +	  label. This property is deprecated - use 'function' and 'color'
> +	  properties instead.
>  
>  - default-state : The initial state of the LED. Valid values are "on", "off",
>    and "keep". If the LED is already on or off and the default-state property is
> @@ -87,29 +96,59 @@ Required properties for trigger source:
>  
>  * Examples
>  
> -gpio-leds {
> +#include <dt-bindings/leds/common.h>
> +
> +led-controller@0 {
>  	compatible = "gpio-leds";
>  
> -	system-status {
> -		label = "Status";
> +	led0 {
> +		function = LED_FUNCTION_STATUS;

Missing color for example unless there is a reason to omit it for GPIO LEDs

Also missing reg here

>  		linux,default-trigger = "heartbeat";
>  		gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
>  	};
>  
> -	usb {
> +	led1 {
> +		function = LED_FUNCTION_USB;

Same as above
Also missing reg here
>  		gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
>  		trigger-sources = <&ohci_port1>, <&ehci_port1>;
>  	};
>  };
>  
> -max77693-led {
> +led-controller@0 {
>  	compatible = "maxim,max77693-led";
>  
> -	camera-flash {
> -		label = "Flash";
> +	led {
> +		function = LED_FUNCTION_FLASH;
> +		color = LED_COLOR_NAME_WHITE;
>  		led-sources = <0>, <1>;
>  		led-max-microamp = <50000>;
>  		flash-max-microamp = <320000>;
>  		flash-max-timeout-us = <500000>;
>  	};
>  };
> +
> +led-controller@30 {
> +        compatible = "panasonic,an30259a";
> +        reg = <0x30>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        led@1 {
> +                reg = <1>;
> +                linux,default-trigger = "heartbeat";
> +                function = LED_FUNCTION_INDICATOR;
> +                color = LED_COLOR_NAME_RED;
> +        };
> +
> +        led@2 {
> +                reg = <2>;
> +                function = LED_FUNCTION_INDICATOR;
> +                color = LED_COLOR_NAME_GREEN;
> +        };
> +
> +        led@3 {
> +                reg = <3>;
> +                function = LED_FUNCTION_INDICATOR;
> +                color = LED_COLOR_NAME_BLUE;
> +        };
> +};
> 


-- 
------------------
Dan Murphy