From: Ninad Palsule <ninad@linux.ibm.com>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: linux-kernel@vger.kernel.org,
openipmi-developer@lists.sourceforge.net, pabeni@redhat.com,
krzk+dt@kernel.org, kuba@kernel.org, joel@jms.id.au,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, davem@davemloft.net,
eajames@linux.ibm.com, andrew@codeconstruct.com.au,
andrew+netdev@lunn.ch, minyard@acm.org, edumazet@google.com,
conor+dt@kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v5 00/10] DTS updates for system1 BMC
Date: Thu, 16 Jan 2025 09:15:56 -0600 [thread overview]
Message-ID: <98c24ee1-3a02-4df9-b181-22f3e6676b85@linux.ibm.com> (raw)
In-Reply-To: <173690506198.2128017.15705512689029125898.robh@kernel.org>
Hello Rob,
On 1/14/25 19:40, Rob Herring (Arm) wrote:
> make sure dt-schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250114220147.757075-1-ninad@linux.ibm.com:
>
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dtb: gpio@1e780000: 'pin_func_mode0', 'pin_func_mode1', 'pin_func_mode2', 'pin_gpio_a0', 'pin_gpio_a1', 'pin_gpio_b1', 'pin_gpio_b2', 'pin_gpio_b7', 'pin_gpio_d1', 'pin_gpio_f1', 'pin_gpio_f4', 'pin_gpio_f5', 'pin_gpio_f7', 'pin_gpio_g3', 'pin_gpio_g4', 'pin_gpio_g5', 'pin_gpio_h0', 'pin_gpio_h1', 'pin_gpio_h2', 'pin_gpio_h7' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dtb: gpio@1e780000: 'doom-guardrail' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dtb: gpio@1e780000: 'nic_func_mode0', 'nic_func_mode1', 'seq_cont' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dtb: gpio@1e780000: 'pin_gpio_aa6', 'pin_gpio_aa7', 'pin_gpio_ab0', 'pin_gpio_b0', 'pin_gpio_b5', 'pin_gpio_h5', 'pin_gpio_z2' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dtb: gpio@1e780000: 'pin_gpio_b6', 'pin_gpio_i3' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: gpio@1e780000: 'usb_power' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dtb: gpio@1e780000: 'bmc-ready' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: gpio@1e780000: 'i2c3_mux_oe_n', 'usb_power' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dtb: gpio@1e780000: 'bmc-ready' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: gpio@1e780000: 'i2c3_mux_oe_n', 'usb_power' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: gpio@1e780000: 'i2c3_mux_oe_n', 'usb_power' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: gpio@1e780000: 'usb_power' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dtb: gpio@1e780000: 'func_mode0', 'func_mode1', 'func_mode2', 'ncsi_cfg', 'seq_cont' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dtb: gpio@1e780000: 'pin_gpio_a1', 'pin_gpio_a3', 'pin_gpio_aa0', 'pin_gpio_aa4', 'pin_gpio_ab3', 'pin_gpio_ac6', 'pin_gpio_b5', 'pin_gpio_b7', 'pin_gpio_e0', 'pin_gpio_e2', 'pin_gpio_e5', 'pin_gpio_e6', 'pin_gpio_f0', 'pin_gpio_f1', 'pin_gpio_f2', 'pin_gpio_f3', 'pin_gpio_f4', 'pin_gpio_f6', 'pin_gpio_g7', 'pin_gpio_h6', 'pin_gpio_i3', 'pin_gpio_j1', 'pin_gpio_j2', 'pin_gpio_j3', 'pin_gpio_l0', 'pin_gpio_l1', 'pin_gpio_l4', 'pin_gpio_l5', 'pin_gpio_r6', 'pin_gpio_r7', 'pin_gpio_s1', 'pin_gpio_s2', 'pin_gpio_s6', 'pin_gpio_z3' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dtb: gpio@1e780000: 'pin_gpio_aa0', 'pin_gpio_aa5', 'pin_gpio_b5', 'pin_gpio_f0', 'pin_gpio_f3', 'pin_gpio_f4', 'pin_gpio_f5', 'pin_gpio_g4', 'pin_gpio_g7', 'pin_gpio_h2', 'pin_gpio_h3', 'pin_gpio_i3', 'pin_gpio_j2', 'pin_gpio_j3', 'pin_gpio_s2', 'pin_gpio_s4', 'pin_gpio_s6', 'pin_gpio_y0', 'pin_gpio_y1', 'pin_gpio_z0', 'pin_gpio_z2', 'pin_gpio_z3', 'pin_gpio_z7' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dtb: gpio@1e780000: 'line_bmc_i2c2_sw_rst_n', 'line_bmc_i2c5_sw_rst_n', 'line_iso_u146_en', 'ncsi_mux_en_n' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dtb: gpio@1e780000: 'pin_gpio_c7', 'pin_gpio_d1' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
This patchset fixes this issue.
https://lore.kernel.org/linux-kernel/20250116090009.87338-1-krzysztof.kozlowski@linaro.org/
Thanks & Regards,
Ninad
prev parent reply other threads:[~2025-01-16 15:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-14 22:01 Ninad Palsule
2025-01-14 22:01 ` [PATCH v5 01/10] dt-bindings: net: faraday,ftgmac100: Add phys mode Ninad Palsule
2025-01-14 22:01 ` [PATCH v5 02/10] bindings: ipmi: Add binding for IPMB device intf Ninad Palsule
2025-01-14 23:57 ` Rob Herring (Arm)
2025-01-14 22:01 ` [PATCH v5 03/10] dt-bindings: gpio: ast2400-gpio: Add hogs parsing Ninad Palsule
2025-01-14 23:57 ` Rob Herring (Arm)
2025-01-16 15:04 ` Ninad Palsule
2025-01-16 19:57 ` Rob Herring
2025-01-16 20:37 ` Ninad Palsule
2025-01-15 8:45 ` Krzysztof Kozlowski
2025-01-15 14:24 ` Rob Herring
2025-01-15 20:30 ` Krzysztof Kozlowski
[not found] ` <a164ab0e-1cdf-427e-bfb7-f5614be5b0fa@linux.ibm.com>
2025-01-16 10:38 ` Krzysztof Kozlowski
[not found] ` <10c06fec-b721-4a7f-b105-c3c4c8358a47@linux.ibm.com>
2025-01-16 14:48 ` Rob Herring
2025-01-16 15:10 ` Ninad Palsule
2025-01-14 22:01 ` [PATCH v5 04/10] ARM: dts: aspeed: system1: Add IPMB device Ninad Palsule
2025-01-14 22:01 ` [PATCH v5 05/10] ARM: dts: aspeed: system1: Add GPIO line name Ninad Palsule
2025-01-14 22:01 ` [PATCH v5 06/10] ARM: dts: aspeed: system1: Reduce sgpio speed Ninad Palsule
2025-01-14 22:01 ` [PATCH v5 07/10] ARM: dts: aspeed: system1: Update LED gpio name Ninad Palsule
2025-01-14 22:01 ` [PATCH v5 08/10] ARM: dts: aspeed: system1: Remove VRs max8952 Ninad Palsule
2025-01-14 22:01 ` [PATCH v5 09/10] ARM: dts: aspeed: system1: Mark GPIO line high/low Ninad Palsule
2025-01-14 22:01 ` [PATCH v5 10/10] ARM: dts: aspeed: system1: Disable gpio pull down Ninad Palsule
2025-01-15 1:40 ` [PATCH v5 00/10] DTS updates for system1 BMC Rob Herring (Arm)
2025-01-16 15:15 ` Ninad Palsule [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=98c24ee1-3a02-4df9-b181-22f3e6676b85@linux.ibm.com \
--to=ninad@linux.ibm.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=eajames@linux.ibm.com \
--cc=edumazet@google.com \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=minyard@acm.org \
--cc=netdev@vger.kernel.org \
--cc=openipmi-developer@lists.sourceforge.net \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®