From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933020AbeCFN5Y (ORCPT ); Tue, 6 Mar 2018 08:57:24 -0500 Received: from mail.bootlin.com ([62.4.15.54]:35004 "EHLO mail.bootlin.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753507AbeCFN5P (ORCPT ); Tue, 6 Mar 2018 08:57:15 -0500 From: Maxime Ripard To: Thierry Reding , Chen-Yu Tsai , Maxime Ripard , Mark Rutland , Rob Herring Cc: dri-devel@lists.freedesktop.org, Gustavo Padovan , Daniel Vetter , Maarten Lankhorst , Sean Paul , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Thomas Petazzoni , Maxime Ripard Subject: [PATCH v3 4/7] dt-bindings: panel: Add the Ilitek ILI9881c panel documentation Date: Tue, 6 Mar 2018 14:56:01 +0100 Message-Id: <98f6b4c0746a0d244d009263e8b3e20f40ac280f.1520344489.git-series.maxime.ripard@bootlin.com> X-Mailer: git-send-email 2.14.3 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Maxime Ripard The LHR050H41 from BananaPi is a 1280x700 4-lanes DSI panel based on the ILI9881c from Ilitek. Acked-by: Rob Herring Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt new file mode 100644 index 000000000000..df05e8bb4851 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt @@ -0,0 +1,20 @@ +Ilitek ILI9881c based MIPI-DSI panels + +Required properties: + - compatible: must be "ilitek,ili9881c" and one of: + * "bananapi,lhr050h41" + - reg: DSI virtual channel used by that screen + - power-gpios: a GPIO phandle for the power pin + - reset-gpios: a GPIO phandle for the reset pin + +Optional properties: + - backlight: phandle to the backlight used + +Example: +panel@0 { + compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; + reg = <0>; + power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */ + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&pwm_bl>; +}; -- git-series 0.9.1