From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
To: netdev@vger.kernel.org
Cc: Xin Long <lucien.xin@gmail.com>,
Michael Tuexen <Michael.Tuexen@lurchi.franken.de>,
Yasevich <vyasevich@gmail.com>,
Neil Horman <nhorman@tuxdriver.com>,
linux-sctp@vger.kernel.org, linux-kernel@vger.kernel.org,
Corey Minyard <cminyard@mvista.com>
Subject: [PATCH net] sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
Date: Wed, 24 Jun 2020 17:34:18 -0300 [thread overview]
Message-ID: <991916791cdcc37456ccb061779d485063b97129.1593030427.git.marcelo.leitner@gmail.com> (raw)
In-Reply-To: <20200623160417.12418-1-minyard@acm.org>
If a socket is set ipv6only, it will still send IPv4 addresses in the
INIT and INIT_ACK packets. This potentially misleads the peer into using
them, which then would cause association termination.
The fix is to not add IPv4 addresses to ipv6only sockets.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
---
include/net/sctp/constants.h | 8 +++++---
net/sctp/associola.c | 5 ++++-
net/sctp/bind_addr.c | 1 +
net/sctp/protocol.c | 3 ++-
4 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
index 15b4d9aec7ff278e67a7183f10c14be237227d6b..122d9e2d8dfde33b787d575fc42d454732550698 100644
--- a/include/net/sctp/constants.h
+++ b/include/net/sctp/constants.h
@@ -353,11 +353,13 @@ enum {
ipv4_is_anycast_6to4(a))
/* Flags used for the bind address copy functions. */
-#define SCTP_ADDR6_ALLOWED 0x00000001 /* IPv6 address is allowed by
+#define SCTP_ADDR4_ALLOWED 0x00000001 /* IPv4 address is allowed by
local sock family */
-#define SCTP_ADDR4_PEERSUPP 0x00000002 /* IPv4 address is supported by
+#define SCTP_ADDR6_ALLOWED 0x00000002 /* IPv6 address is allowed by
+ local sock family */
+#define SCTP_ADDR4_PEERSUPP 0x00000004 /* IPv4 address is supported by
peer */
-#define SCTP_ADDR6_PEERSUPP 0x00000004 /* IPv6 address is supported by
+#define SCTP_ADDR6_PEERSUPP 0x00000008 /* IPv6 address is supported by
peer */
/* Reasons to retransmit. */
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 72315137d7e7f20d5182291ef4b01102f030078b..8d735461fa196567ab19c583703aad098ef8e240 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1565,12 +1565,15 @@ void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned int len)
int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc,
enum sctp_scope scope, gfp_t gfp)
{
+ struct sock *sk = asoc->base.sk;
int flags;
/* Use scoping rules to determine the subset of addresses from
* the endpoint.
*/
- flags = (PF_INET6 == asoc->base.sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0;
+ flags = (PF_INET6 == sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0;
+ if (!inet_v6_ipv6only(sk))
+ flags |= SCTP_ADDR4_ALLOWED;
if (asoc->peer.ipv4_address)
flags |= SCTP_ADDR4_PEERSUPP;
if (asoc->peer.ipv6_address)
diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c
index 53bc61537f44f4e766c417fcef72234df52ecd04..701c5a4e441d9c248df9472f22db5b78987f9e44 100644
--- a/net/sctp/bind_addr.c
+++ b/net/sctp/bind_addr.c
@@ -461,6 +461,7 @@ static int sctp_copy_one_addr(struct net *net, struct sctp_bind_addr *dest,
* well as the remote peer.
*/
if ((((AF_INET == addr->sa.sa_family) &&
+ (flags & SCTP_ADDR4_ALLOWED) &&
(flags & SCTP_ADDR4_PEERSUPP))) ||
(((AF_INET6 == addr->sa.sa_family) &&
(flags & SCTP_ADDR6_ALLOWED) &&
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 092d1afdee0d23cd974210839310fbf406dd443f..cde29f3c7fb3c40ee117636fa3b4b7f0a03e4fba 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -148,7 +148,8 @@ int sctp_copy_local_addr_list(struct net *net, struct sctp_bind_addr *bp,
* sock as well as the remote peer.
*/
if (addr->a.sa.sa_family == AF_INET &&
- !(copy_flags & SCTP_ADDR4_PEERSUPP))
+ (!(copy_flags & SCTP_ADDR4_ALLOWED) ||
+ !(copy_flags & SCTP_ADDR4_PEERSUPP)))
continue;
if (addr->a.sa.sa_family == AF_INET6 &&
(!(copy_flags & SCTP_ADDR6_ALLOWED) ||
--
2.25.4
next prev parent reply other threads:[~2020-06-24 20:34 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-21 15:56 Strange problem with SCTP+IPv6 Corey Minyard
2020-06-22 12:01 ` Xin Long
2020-06-22 12:32 ` Michael Tuexen
2020-06-22 16:57 ` Corey Minyard
2020-06-22 18:01 ` Michael Tuexen
2020-06-22 18:32 ` Marcelo Ricardo Leitner
2020-06-22 18:34 ` Michael Tuexen
2020-06-23 10:13 ` Xin Long
2020-06-23 13:29 ` Corey Minyard
2020-06-23 15:40 ` Xin Long
2020-06-23 16:00 ` Corey Minyard
2020-06-24 6:58 ` Xin Long
2020-06-26 16:13 ` David Laight
2020-06-26 16:27 ` Michael Tuexen
2020-06-23 13:17 ` David Laight
2020-06-23 16:04 ` [PATCH] sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket minyard
2020-06-24 20:31 ` Marcelo Ricardo Leitner
2020-06-24 20:34 ` Marcelo Ricardo Leitner [this message]
2020-06-24 20:53 ` [PATCH net] " Corey Minyard
2020-06-25 23:12 ` David Miller
2020-06-23 16:17 ` Strange problem with SCTP+IPv6 Corey Minyard
2020-06-23 21:21 ` 'Marcelo Ricardo Leitner'
2020-06-23 21:24 ` Michael Tuexen
2020-06-23 21:31 ` Marcelo Ricardo Leitner
2020-06-23 21:48 ` Michael Tuexen
2020-06-24 7:25 ` Xin Long
2020-06-24 9:18 ` Michael Tuexen
2020-06-23 17:09 ` Michael Tuexen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=991916791cdcc37456ccb061779d485063b97129.1593030427.git.marcelo.leitner@gmail.com \
--to=marcelo.leitner@gmail.com \
--cc=Michael.Tuexen@lurchi.franken.de \
--cc=cminyard@mvista.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sctp@vger.kernel.org \
--cc=lucien.xin@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
--cc=vyasevich@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®