Re: [PATCH] mmc: block: Dont report successful writes with errors

[Adrian Hunter <adrian.hunter@intel.com>]

On 19/07/22 18:34, Christian Loehle wrote:
> Be as conservative about successful write reporting to the
> block layer for SPI as with normal SD and MMC.
> That means on any errors bytes_xfered is ignored and the
> whole write must be repeated.
> 
> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
> ---
>  drivers/mmc/core/block.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index f4a1281658db..63d1c05582a9 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -1765,8 +1765,12 @@ static bool mmc_blk_status_error(struct request *req, u32 status)
>  	struct mmc_queue *mq = req->q->queuedata;
>  	u32 stop_err_bits;
>  
> +	/*
> +	 * Either write timed out during busy and data->error is set
> +	 * or we actually received a valid R2 and check for error bits.
> +	 */
>  	if (mmc_host_is_spi(mq->card->host))
> -		return false;
> +		return brq->data.error || !!status;

This function is for checking status, so brq->data.error does not
belong here.  Also it would be more readable to use a define e.g.

		return status & SPI_R2_ERRORS;

I think clearing bytes_xfered for SPI brq->data.error should be a
separate patch, and you would need to explain a bit more for that
case too.

>  
>  	stop_err_bits = mmc_blk_stop_err_bits(brq);
>