Re: [RFC v3 05/11] arm64: dts: mt7986: add mmc related device nodes

[Matthias Brugger <matthias.bgg@gmail.com>]

On 06/11/2022 09:50, Frank Wunderlich wrote:
> From: Sam Shih <sam.shih@mediatek.com>
> 
> This patch adds mmc support for MT7986.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> v3:
> - fix pullups/pulldowns for mt7986a-rfb to have generic bias-pull-*
> 
> v2:
> - update mmc-node because clocks changed
> ---
>   arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 87 ++++++++++++++++++++
>   arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 15 ++++
>   2 files changed, 102 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> index 2b5d7ea31b4d..e1a0331aaa5f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> @@ -5,6 +5,8 @@
>    */
>   
>   /dts-v1/;
> +#include <dt-bindings/pinctrl/mt65xx.h>
> +
>   #include "mt7986a.dtsi"
>   
>   / {
> @@ -24,6 +26,15 @@ memory@40000000 {
>   		reg = <0 0x40000000 0 0x40000000>;
>   	};
>   
> +	reg_1p8v: regulator-1p8v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-1.8V";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
>   	reg_3p3v: regulator-3p3v {
>   		compatible = "regulator-fixed";
>   		regulator-name = "fixed-3.3V";
> @@ -76,7 +87,83 @@ switch: switch@0 {
>   	};
>   };
>   
> +&mmc0 {
> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&mmc0_pins_default>;
> +	pinctrl-1 = <&mmc0_pins_uhs>;
> +	bus-width = <8>;
> +	max-frequency = <200000000>;
> +	cap-mmc-highspeed;
> +	mmc-hs200-1_8v;
> +	mmc-hs400-1_8v;
> +	hs400-ds-delay = <0x14014>;
> +	vmmc-supply = <&reg_3p3v>;
> +	vqmmc-supply = <&reg_1p8v>;
> +	non-removable;
> +	no-sd;
> +	no-sdio;
> +	status = "okay";
> +};
> +
>   &pio {
> +	mmc0_pins_default: mmc0-pins {
> +		mux {
> +			function = "emmc";
> +			groups = "emmc_51";

Waiting on
https://patchwork.kernel.org/project/linux-mediatek/patch/20221106080114.7426-3-linux@fw-web.de/

Please correct me if I'm wrong.

Matthias

> +		};
> +		conf-cmd-dat {
> +			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
> +			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
> +			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
> +			input-enable;
> +			drive-strength = <4>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
> +		};
> +		conf-clk {
> +			pins = "EMMC_CK";
> +			drive-strength = <6>;
> +			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
> +		};
> +		conf-ds {
> +			pins = "EMMC_DSL";
> +			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
> +		};
> +		conf-rst {
> +			pins = "EMMC_RSTB";
> +			drive-strength = <4>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
> +		};
> +	};
> +
> +	mmc0_pins_uhs: mmc0-uhs-pins {
> +		mux {
> +			function = "emmc";
> +			groups = "emmc_51";
> +		};
> +		conf-cmd-dat {
> +			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
> +			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
> +			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
> +			input-enable;
> +			drive-strength = <4>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
> +		};
> +		conf-clk {
> +			pins = "EMMC_CK";
> +			drive-strength = <6>;
> +			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
> +		};
> +		conf-ds {
> +			pins = "EMMC_DSL";
> +			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
> +		};
> +		conf-rst {
> +			pins = "EMMC_RSTB";
> +			drive-strength = <4>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
> +		};
> +	};
> +
>   	spi_flash_pins: spi-flash-pins {
>   		mux {
>   			function = "spi";
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> index 1c7a973c28ca..32c26b239ae6 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> @@ -284,6 +284,21 @@ ssusb: usb@11200000 {
>   			status = "disabled";
>   		};
>   
> +		mmc0: mmc@11230000 {
> +			compatible = "mediatek,mt7986-mmc";
> +			reg = <0 0x11230000 0 0x1000>,
> +			      <0 0x11c20000 0 0x1000>;
> +			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
> +				 <&infracfg CLK_INFRA_MSDC_HCK_CK>,
> +				 <&infracfg CLK_INFRA_MSDC_CK>,
> +				 <&infracfg CLK_INFRA_MSDC_133M_CK>,
> +				 <&infracfg CLK_INFRA_MSDC_66M_CK>;
> +			clock-names = "source", "hclk", "source_cg", "bus_clk",
> +				      "sys_cg";
> +			status = "disabled";
> +		};
> +
>   		usb_phy: t-phy@11e10000 {
>   			compatible = "mediatek,mt7986-tphy",
>   				     "mediatek,generic-tphy-v2";