From: Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
To: Wadim Mueller <wafgo01@gmail.com>, Shawn Guo <shawnguo@kernel.org>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Ulf Hansson" <ulf.hansson@linaro.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Chester Lin" <chester62515@gmail.com>,
"Andreas Färber" <afaerber@suse.de>,
"Matthias Brugger" <mbrugger@suse.com>,
"NXP S32 Linux Team" <s32@nxp.com>,
"Tim Harvey" <tharvey@gateworks.com>,
"Marco Felsch" <m.felsch@pengutronix.de>,
"Marek Vasut" <marex@denx.de>,
"Gregor Herburger" <gregor.herburger@ew.tq-group.com>,
"Hugo Villeneuve" <hvilleneuve@dimonoff.com>,
"Joao Paulo Goncalves" <joao.goncalves@toradex.com>,
"Markus Niebel" <Markus.Niebel@ew.tq-group.com>,
"Matthias Schiffer" <matthias.schiffer@tq-group.com>,
"Stefan Wahren" <stefan.wahren@chargebyte.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Philippe Schenker" <philippe.schenker@toradex.com>,
"Josua Mayer" <josua@solid-run.com>,
"Li Yang" <leoyang.li@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-serial@vger.kernel.org
Subject: Re: [PATCH v4 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
Date: Mon, 25 Mar 2024 15:34:15 +0200 [thread overview]
Message-ID: <99e33fe7-2563-49d0-ab66-cb4d243c70ac@oss.nxp.com> (raw)
In-Reply-To: <20240325132634.GA33097@bhlegrsu.conti.de>
On 3/25/24 15:26, Wadim Mueller wrote:
> On Mon, Mar 25, 2024 at 11:30:38AM +0200, Ghennadi Procopciuc wrote:
>> On 3/24/24 23:43, Wadim Mueller wrote:
>>> This commit adds device tree support for the NXP S32G3-based
>>> S32G-VNP-RDB3 Board [1].
>>>
>>> The S32G3 features an 8-core ARM Cortex-A53 based SoC developed by NXP.
>>>
>>> The device tree files are derived from the official NXP downstream
>>> Linux tree [2].
>>>
>>> This addition encompasses a limited selection of peripherals that
>>> are upstream-supported. Apart from the ARM System Modules
>>> (GIC, Generic Timer, etc.), the following IPs have been validated:
>>>
>>> * UART: fsl-linflexuart
>>> * SDHC: fsl-imx-esdhc
>>>
>>> Clock settings for the chip rely on ATF Firmware [3].
>>> Pin control integration into the device tree is pending and currently
>>> relies on Firmware/U-Boot settings [4].
>>>
>>> These changes were validated using BSP39 Firmware/U-Boot from NXP [5].
>>>
>>> The modifications enable booting the official Ubuntu 22.04 from NXP on
>>> the RDB3 with default settings from the SD card and eMMC.
>>>
>>> [1] https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3
>>> [2] https://github.com/nxp-auto-linux/linux
>>> [3] https://github.com/nxp-auto-linux/arm-trusted-firmware
>>> [4] https://github.com/nxp-auto-linux/u-boot
>>> [5] https://github.com/nxp-auto-linux/auto_yocto_bsp
>>>
>>> Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
>>> ---
>>
>> Thank you, Wadim, for bringing up the S32G3RDB3 board! The board boots
>> with all 8 cores. The log is attached below.
>>
>
> Thanks for testing Ghennadi, much appreciated.
>
> According to MAINTAINERS all "dts/freescale/" DTS files
> needs to go through the IMX/MXC tree?
> Is my understanding correct? Just asking whether I understand the file
> content correctly!
>
Indeed, everything should go through the IMX tree.
Here [0] you can find a long discussion about this.
[0]
https://lore.kernel.org/linux-arm-kernel/a5f7b53a-6b44-4f0b-83f2-b055b8aa3b2d@suse.com/
Regards,
Ghennadi
next prev parent reply other threads:[~2024-03-25 13:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-24 21:43 [PATCH v4 0/4] NXP S32G3 SoC initial bring-up Wadim Mueller
2024-03-24 21:43 ` [PATCH v4 1/4] dt-bindings: arm: fsl: add NXP S32G3 board Wadim Mueller
2024-04-02 14:34 ` Shawn Guo
2024-03-24 21:43 ` [PATCH v4 2/4] dt-bindings: serial: fsl-linflexuart: add compatible for S32G3 Wadim Mueller
2024-03-25 7:53 ` Krzysztof Kozlowski
2024-04-12 16:32 ` Rob Herring
2024-03-24 21:43 ` [PATCH v4 3/4] dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support Wadim Mueller
2024-03-25 7:54 ` Krzysztof Kozlowski
2024-03-25 13:19 ` Ulf Hansson
2024-03-24 21:43 ` [PATCH v4 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3 Wadim Mueller
2024-03-25 9:30 ` Ghennadi Procopciuc
2024-03-25 13:26 ` Wadim Mueller
2024-03-25 13:34 ` Ghennadi Procopciuc [this message]
2024-04-02 14:41 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=99e33fe7-2563-49d0-ab66-cb4d243c70ac@oss.nxp.com \
--to=ghennadi.procopciuc@oss.nxp.com \
--cc=Markus.Niebel@ew.tq-group.com \
--cc=afaerber@suse.de \
--cc=bhelgaas@google.com \
--cc=chester62515@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=gregor.herburger@ew.tq-group.com \
--cc=hvilleneuve@dimonoff.com \
--cc=jirislaby@kernel.org \
--cc=joao.goncalves@toradex.com \
--cc=josua@solid-run.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=marex@denx.de \
--cc=matthias.schiffer@tq-group.com \
--cc=mbrugger@suse.com \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=s32@nxp.com \
--cc=shawnguo@kernel.org \
--cc=stefan.wahren@chargebyte.com \
--cc=tharvey@gateworks.com \
--cc=ulf.hansson@linaro.org \
--cc=wafgo01@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®