mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nico Coesel <nico@nctdev.nl>
To: linux-kernel@vger.kernel.org
Subject: Patch to allow hot-plugging Atmel AT24 eeproms
Date: Sat, 27 Jan 2024 15:06:51 +0100	[thread overview]
Message-ID: <9a001fc8-d748-7d45-9a0f-6a2a5dd3438d@nctdev.nl> (raw)

Hello,
I'm working on an embedded project which uses SFPs (hot-pluggable 
optical network interface modules) which have two Atmel 'AT24' 
compatible eeproms inside. I wanted to be able to read the contents of 
the eeproms through the nvme subsystem as a file so the higher level 
software doesn't need to mess with I2C and all.

I tried to use the at24 driver but it tests if the device is present or 
not. Since the device may not be present, this behaviour is not suitable 
for the project I'm working on. The patch below (against kernel version 
5.4.142) adds a hotplug flag so the 'device present' test is skipped and 
the device is added nevertheless. The behaviour is controlled by an 
extra device property called 'hotplug'.


diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2cccd82..c4e9cf3 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -24,6 +24,9 @@
  #include <linux/pm_runtime.h>
  #include <linux/gpio/consumer.h>

+//NC: Added flag to support devices not being preseny
+#define AT24_FLAG_HOTPLUG    BIT(8)
+
  /* Address pointer is 16 bit. */
  #define AT24_FLAG_ADDR16    BIT(7)
  /* sysfs-entry will be read-only. */
@@ -592,6 +595,10 @@
      if (device_property_present(dev, "no-read-rollover"))
          flags |= AT24_FLAG_NO_RDROL;

+    //NC: Add hotplug flag. This skips device detection
+    if (device_property_present(dev, "hotplug"))
+        flags |= AT24_FLAG_HOTPLUG;
+
      err = device_property_read_u32(dev, "address-width", &addrw);
      if (!err) {
          switch (addrw) {
@@ -709,11 +716,14 @@
       * Perform a one-byte test read to verify that the
       * chip is functional.
       */
-    err = at24_read(at24, 0, &test_byte, 1);
-    pm_runtime_idle(dev);
-    if (err) {
-        pm_runtime_disable(dev);
-        return -ENODEV;
+    if ((flags & AT24_FLAG_HOTPLUG) ==0)
+        {
+        err = at24_read(at24, 0, &test_byte, 1);
+        pm_runtime_idle(dev);
+        if (err) {
+            pm_runtime_disable(dev);
+            return -ENODEV;
+        }
      }

      dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n",

I used the device tree snippet from below:

     sfp1_info: eeprom@50 {
         compatible = "atmel,24c02";
         reg = <0x50>;
         read-only;
         pagesize = <1>;
         hotplug;
     };

I hope this can be of use to somebody.

Regards,
Nico Coesel

-- 
o---------------------------------------------------------------o
|                       N C T  Developments                     |
|Innovative embedded solutions                                  |
o---------------------------------------------------------------o


                 reply	other threads:[~2024-01-27 14:08 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9a001fc8-d748-7d45-9a0f-6a2a5dd3438d@nctdev.nl \
    --to=nico@nctdev.nl \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®