Re: [PATCH 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts

[Daniel Baluta <daniel.baluta@oss.nxp.com>]

On 3/19/26 11:02, Daniel Baluta wrote:
> On 3/18/26 10:04, Joseph Guo wrote:
>> [You don't often get email from qijian.guo@nxp.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>>
>> NXP i.MX95 19x19 FRDM PRO is cost-effective with extensive
>> expansion capabilities based on the i.MX95 19x19 SoC.
>>
>> Add device tree for this board. Including:
>> - LPUART1 and LPUART5
>> - NETC
>> - USB
>> - 2 M-Key M.2 PCIe
>> - uSDHC1, uSDHC2 and uSDHC3
>> - FlexCAN1 and FlexCAN3
>> - LPI2C3, LPI2C4 and their child nodes
>> - Watchdog3
>> - SAI, MQS, MICFIL
>>
>> Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
>>
> [..]
>
>> +
>> +       sound-bt-sco {
>> +               compatible = "simple-audio-card";
>> +               simple-audio-card,name = "bt-sco-audio";
>> +               simple-audio-card,format = "dsp_a";
>> +               simple-audio-card,bitclock-inversion;
>> +               simple-audio-card,frame-master = <&btcpu>;
>> +               simple-audio-card,bitclock-master = <&btcpu>;
>> +
>> +               btcpu: simple-audio-card,cpu {
>> +                       sound-dai = <&sai5>;
>> +                       dai-tdm-slot-num = <2>;
>> +                       dai-tdm-slot-width = <16>;
>> +               };
>> +
>> +               simple-audio-card,codec {
>> +                       sound-dai = <&bt_sco_codec 1>;
>> +               };
>> +       };
>> +
>> +       sound-micfil {
>> +               compatible = "fsl,imx-audio-card";
> At least for this node we would want to use audio-graph-card2. So you either leave this
>
> out in the next version or switch to audio-graph-card2 as we did for imx95-15x15-frdm.dts
>
Sorry, the node I was aiming the comment above for is this one:

+       sound-mqs {
+               compatible = "fsl,imx-audio-mqs";
+               model = "mqs-audio";
+               audio-cpu = <&sai1>;
+               audio-codec = <&mqs1>;
+       };