mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Jesper Juhl" <jesper.juhl@gmail.com>
To: "Jens Axboe" <jens.axboe@oracle.com>
Cc: Christian <christiand59@web.de>, linux-kernel@vger.kernel.org
Subject: Re: sluggish system responsiveness under higher IO load
Date: Mon, 9 Oct 2006 01:50:26 +0200	[thread overview]
Message-ID: <9a8748490610081650q26511b89s4e694f841803cda1@mail.gmail.com> (raw)
In-Reply-To: <20061008170538.GZ8814@kernel.dk>

On 08/10/06, Jens Axboe <jens.axboe@oracle.com> wrote:
> On Sun, Oct 08 2006, Christian wrote:
> > Am Freitag, 6. Oktober 2006 17:58 schrieb Paolo Ornati:
> > > On Sun, 13 Aug 2006 18:15:12 +0200
> > >
> > > Matthias Dahl <mlkernel@mortal-soul.de> wrote:
> > > > Just let me know once you got them, so I can safely delete them again.
> > > >
> > > > At the moment, I am trying without preemption but for example doing a
> > > > untar kernel sources still results in sluggish system responsiveness. :-(
> > >
> > > I used to have this type of problem and 2.6.19-rc1 looks much better
> > > than 2.6.18.
> > >
> > > I'm using CONFIG_PREEMPT + CONFIG_PREEMPT_BKL, CFQ i/o scheduler
> > > and /proc/sys/vm/swappiness = 20.
> >
> >
> > Which change in the new kernel has made it better? I was following the lkml
> > very close and didn't see any change that could have fixed that problem.
>
> There is a substantial CFQ update, so it could be that. Or it could be
> something unrelated of course, I didn't check if eg the cpu scheduler
> changed much. Or vm :-)
>
> --
> Jens Axboe
>
I want to chime in here and let you know that I've experienced
something similar.

I'm using CFQ as my default I/O schedular.
Since 2.6.18-git<something_I'm_not_sure_of> I've experienced that when
doing heavy (or even not so heave) disk I/O my system gets very
sluggish. Observable by the fact that my mouse pointer in X "jumps"
which it never did before, and switching windows I can see the new
window repaint slowly whereas earlier it would just snap onto the
screen.

<serious hand-waving enabled>
This is quite unreliable, but I *seem* to have observed a slightly
higher overall memory use for my system since 2.6.18+ as well as the
software interrupt rate (as observable by 'top' oscilating between 1.5
& 5 % with 2.6.18+ where with older kernels it would seem to mostly
stay below 1%.
I've also observed that when rebooting, unmounting my local
filesystems takes significantly longer (previously just a second or
two, recently up to a minute or not at all, that is, the system just
hangs) - may or may not be related to this.
<serious hand-waving disabled>

In any case, disk I/O seems to have a large negative impact on system
performance recently compared to pre-2.6.18* kernels.

-- 
Jesper Juhl <jesper.juhl@gmail.com>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html

  reply	other threads:[~2006-10-08 23:50 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-08-06 10:00 Matthias Dahl
2006-08-06 10:15 ` Andrew Morton
2006-08-06 13:54   ` Matthias Dahl
2006-08-06 19:37     ` Andrew Morton
2006-08-08 15:47       ` Matthias Dahl
2006-08-07 13:48     ` Jens Axboe
2006-08-08 15:56       ` Matthias Dahl
2006-08-08 17:44       ` Matthias Dahl
2006-08-08 19:02         ` Jens Axboe
2006-08-10 12:28           ` Jens Axboe
2006-08-11 11:40             ` Matthias Dahl
2006-08-13 16:15             ` Matthias Dahl
2006-10-06 15:58               ` Paolo Ornati
2006-10-08 14:28                 ` Christian
2006-10-08 17:05                   ` Jens Axboe
2006-10-08 23:50                     ` Jesper Juhl [this message]
2006-10-09  5:58                       ` Jens Axboe
2006-10-14 14:39                 ` Matthias Dahl
2006-10-14 14:57                   ` Paolo Ornati
2006-10-14 18:20                   ` Mike Galbraith
2006-09-03 11:15             ` Matthias Dahl
2006-09-15 18:17               ` Jens Axboe
2006-09-24 14:32                 ` Matthias Dahl
2006-09-24 20:27                   ` Mike Galbraith

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9a8748490610081650q26511b89s4e694f841803cda1@mail.gmail.com \
    --to=jesper.juhl@gmail.com \
    --cc=christiand59@web.de \
    --cc=jens.axboe@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®