mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	"Marijn Suijten" <marijn.suijten@somainline.org>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Paloma Arellano <quic_parellan@quicinc.com>,
	Douglas Anderson <dianders@chromium.org>,
	Stephen Boyd <swboyd@chromium.org>,
	<linux-arm-msm@vger.kernel.org>,
	<dri-devel@lists.freedesktop.org>,
	<freedreno@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets
Date: Thu, 12 Dec 2024 15:53:18 -0800	[thread overview]
Message-ID: <9a9ff3a5-5c01-45fd-a89a-b8305baac5bd@quicinc.com> (raw)
In-Reply-To: <CAA8EJpqO=AjVGEnZHNbM5+Mnu2gMN96kABBLM5XHh3NMMGFtjw@mail.gmail.com>



On 12/12/2024 2:28 PM, Dmitry Baryshkov wrote:
> On Thu, 12 Dec 2024 at 23:41, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote:
>>
>>
>>
>> On 12/11/2024 3:41 PM, Dmitry Baryshkov wrote:
>>> Use msm_dp_utils_pack_sdp_header() and call msm_dp_write_link() directly
>>> to program audio packet data. Use 0 as Packet ID, as it was not
>>> programmed earlier.
>>>
>>> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>> ---
>>>    drivers/gpu/drm/msm/dp/dp_audio.c | 288 +++++++++-----------------------------
>>>    1 file changed, 66 insertions(+), 222 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/dp/dp_audio.c b/drivers/gpu/drm/msm/dp/dp_audio.c
>>> index 5cbb11986460d1e4ed1890bdf66d0913e013083c..1aa52d5cc08684a49102e45ed6e40ac2b13497c7 100644
>>> --- a/drivers/gpu/drm/msm/dp/dp_audio.c
>>> +++ b/drivers/gpu/drm/msm/dp/dp_audio.c
>>> @@ -14,6 +14,7 @@
>>>    #include "dp_catalog.h"
>>>    #include "dp_audio.h"
>>>    #include "dp_panel.h"
>>> +#include "dp_reg.h"
>>>    #include "dp_display.h"
>>>    #include "dp_utils.h"
>>>
>>> @@ -28,251 +29,94 @@ struct msm_dp_audio_private {
>>>        struct msm_dp_audio msm_dp_audio;
>>>    };
>>>
>>> -static u32 msm_dp_audio_get_header(struct msm_dp_catalog *catalog,
>>> -             enum msm_dp_catalog_audio_sdp_type sdp,
>>> -             enum msm_dp_catalog_audio_header_type header)
>>> -{
>>> -     return msm_dp_catalog_audio_get_header(catalog, sdp, header);
>>> -}
>>> -
>>> -static void msm_dp_audio_set_header(struct msm_dp_catalog *catalog,
>>> -             u32 data,
>>> -             enum msm_dp_catalog_audio_sdp_type sdp,
>>> -             enum msm_dp_catalog_audio_header_type header)
>>> -{
>>> -     msm_dp_catalog_audio_set_header(catalog, sdp, header, data);
>>> -}
>>> -
>>>    static void msm_dp_audio_stream_sdp(struct msm_dp_audio_private *audio)
>>>    {
>>>        struct msm_dp_catalog *catalog = audio->catalog;
>>> -     u32 value, new_value;
>>> -     u8 parity_byte;
>>> -
>>> -     /* Config header and parity byte 1 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_STREAM, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     new_value = 0x02;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_1_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_1_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 1: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_STREAM, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     /* Config header and parity byte 2 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_STREAM, DP_AUDIO_SDP_HEADER_2);
>>> -     new_value = value;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_2_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_2_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 2: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_STREAM, DP_AUDIO_SDP_HEADER_2);
>>> -
>>> -     /* Config header and parity byte 3 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_STREAM, DP_AUDIO_SDP_HEADER_3);
>>> -
>>> -     new_value = audio->channels - 1;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_3_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_3_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 3: value = 0x%x, parity_byte = 0x%x\n",
>>> -             value, parity_byte);
>>> -
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_STREAM, DP_AUDIO_SDP_HEADER_3);
>>> +     struct dp_sdp_header sdp_hdr = {
>>> +             .HB0 = 0x00,
>>> +             .HB1 = 0x02,
>>> +             .HB2 = 0x00,
>>> +             .HB3 = audio->channels - 1,
>>> +     };
>>> +     u32 header[2];
>>> +
>>> +     msm_dp_utils_pack_sdp_header(&sdp_hdr, header);
>>> +
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_STREAM_0, header[0]);
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_STREAM_1, header[1]);
>>>    }
>>
>> This patch is changing the programming behavior.
>>
>> Earlier it was using a read/modify/write on each register. Now, its just
>>    a write. I checked a few chipsets, the reset value of registers was 0,
>> so that part is okay.
> 
> Except that it was not a correct RMW, it was read, OR new data without
> clearing the bitfield, write. So it has been working mostly by a
> miracle,
> 
>>
>> But, for the MMSS_DP_AUDIO_STREAM_0 register, earlier we were writing
>> only the upper nibble, that is bits 15:0 of DP_AUDIO_SDP_HEADER_0 was
>> kept as-it-is, but now this patch is changing that to 0. What was the
>> reason for that change?
> 
> It is described in the commit message: "Use 0 as Packet ID, as it was not
> programmed earlier."
> 

The part of using 0 as Packet ID is but not the behavior of changing the 
RMW which is also pretty significant. That was all happening under the hood.

>>
>> This is true for all the APIs being touched in this file.
>>
>> I guess the whole point of having that audio map in the catalog was to
>> preserve the read values of these registers. I have to check what was
>> the reason behind that as once again this was before I worked on this
>> driver as well.
>>
>> So technically there are two parts to this change:
>>
>> 1) dropping read for each header and directly just writing it
>> 2) Writing the registers directly instead of going through catalog
>>
>> It seems like (1) and (2) are independent. I hope (1) was not the reason
>> to have started this whole rework.
> 
> Yes, the driver spends a lot of effort to preserve the data that will
> be rewritten when the function is called to write the next header
> byte. So it is useless. Only HB0 has been preserved, PacketID. If for
> some reason we are generating a stream with the non-zero ID, it should
> be explicit, not implicitly 'preserved'.
> 

I am trying to understand why this was being preserved. Audio 
programming is half in DP driver and half in ADSP. I dont know if the 
expectation was that packet ID will be programmed elsewhere and not in 
HLOS code hence it was preserved.

> So, the reasons were:
> - fix the RMW cycles to drop old values from the registers
> - use new msm_dp_utils_pack_sdp_header()
> - get rid of the useless indirection through the catalog and enum
> msm_dp_catalog_audio_header_type
> - write registers in an efficient way.
> - if we ever have a set of functions to handle DP infoframes (like we
> do for HDMI), make the MSM DP driver ready to be converted to such
> functions.


The only reason the current driver needed to go through the catalog map 
was that it was trying to write one header at a time. And in the 
registers, 2 headers are mapped to one register. So a map was needed. I 
do not know the reason for breaking up the writes into one header at a 
time like I already mentioned so I am trying to gather that info. 
Without knowing the reason it might seem useless but its my duty to make 
sure nothing was overlooked.



> 
>>
>>>
>>>    static void msm_dp_audio_timestamp_sdp(struct msm_dp_audio_private *audio)
>>>    {
>>>        struct msm_dp_catalog *catalog = audio->catalog;
>>> -     u32 value, new_value;
>>> -     u8 parity_byte;
>>> -
>>> -     /* Config header and parity byte 1 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_TIMESTAMP, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     new_value = 0x1;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_1_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_1_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 1: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_TIMESTAMP, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     /* Config header and parity byte 2 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_TIMESTAMP, DP_AUDIO_SDP_HEADER_2);
>>> -
>>> -     new_value = 0x17;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_2_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_2_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 2: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_TIMESTAMP, DP_AUDIO_SDP_HEADER_2);
>>> -
>>> -     /* Config header and parity byte 3 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_TIMESTAMP, DP_AUDIO_SDP_HEADER_3);
>>> -
>>> -     new_value = (0x0 | (0x11 << 2));
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_3_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_3_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 3: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_TIMESTAMP, DP_AUDIO_SDP_HEADER_3);
>>> +     struct dp_sdp_header sdp_hdr = {
>>> +             .HB0 = 0x00,
>>> +             .HB1 = 0x01,
>>> +             .HB2 = 0x17,
>>> +             .HB3 = 0x0 | (0x11 << 2),
>>> +     };
>>> +     u32 header[2];
>>> +
>>> +     msm_dp_utils_pack_sdp_header(&sdp_hdr, header);
>>> +
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_TIMESTAMP_0, header[0]);
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_TIMESTAMP_1, header[1]);
>>>    }
>>>
>>>    static void msm_dp_audio_infoframe_sdp(struct msm_dp_audio_private *audio)
>>>    {
>>>        struct msm_dp_catalog *catalog = audio->catalog;
>>> -     u32 value, new_value;
>>> -     u8 parity_byte;
>>> -
>>> -     /* Config header and parity byte 1 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_INFOFRAME, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     new_value = 0x84;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_1_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_1_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 1: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_INFOFRAME, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     /* Config header and parity byte 2 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_INFOFRAME, DP_AUDIO_SDP_HEADER_2);
>>> -
>>> -     new_value = 0x1b;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_2_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_2_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 2: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_INFOFRAME, DP_AUDIO_SDP_HEADER_2);
>>> -
>>> -     /* Config header and parity byte 3 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_INFOFRAME, DP_AUDIO_SDP_HEADER_3);
>>> -
>>> -     new_value = (0x0 | (0x11 << 2));
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_3_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_3_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 3: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     new_value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_INFOFRAME, DP_AUDIO_SDP_HEADER_3);
>>> +     struct dp_sdp_header sdp_hdr = {
>>> +             .HB0 = 0x00,
>>> +             .HB1 = 0x84,
>>> +             .HB2 = 0x1b,
>>> +             .HB3 = 0x0 | (0x11 << 2),
>>> +     };
>>> +     u32 header[2];
>>> +
>>> +     msm_dp_utils_pack_sdp_header(&sdp_hdr, header);
>>> +
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_INFOFRAME_0, header[0]);
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_INFOFRAME_1, header[1]);
>>>    }
>>>
>>>    static void msm_dp_audio_copy_management_sdp(struct msm_dp_audio_private *audio)
>>>    {
>>>        struct msm_dp_catalog *catalog = audio->catalog;
>>> -     u32 value, new_value;
>>> -     u8 parity_byte;
>>> -
>>> -     /* Config header and parity byte 1 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_COPYMANAGEMENT, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     new_value = 0x05;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_1_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_1_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 1: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_COPYMANAGEMENT, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     /* Config header and parity byte 2 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_COPYMANAGEMENT, DP_AUDIO_SDP_HEADER_2);
>>> -
>>> -     new_value = 0x0F;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_2_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_2_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 2: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_COPYMANAGEMENT, DP_AUDIO_SDP_HEADER_2);
>>> -
>>> -     /* Config header and parity byte 3 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_COPYMANAGEMENT, DP_AUDIO_SDP_HEADER_3);
>>> -
>>> -     new_value = 0x0;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_3_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_3_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 3: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_COPYMANAGEMENT, DP_AUDIO_SDP_HEADER_3);
>>> +     struct dp_sdp_header sdp_hdr = {
>>> +             .HB0 = 0x00,
>>> +             .HB1 = 0x05,
>>> +             .HB2 = 0x0f,
>>> +             .HB3 = 0x00,
>>> +     };
>>> +     u32 header[2];
>>> +
>>> +     msm_dp_utils_pack_sdp_header(&sdp_hdr, header);
>>> +
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_COPYMANAGEMENT_0, header[0]);
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_COPYMANAGEMENT_1, header[1]);
>>>    }
>>>
>>>    static void msm_dp_audio_isrc_sdp(struct msm_dp_audio_private *audio)
>>>    {
>>>        struct msm_dp_catalog *catalog = audio->catalog;
>>> -     u32 value, new_value;
>>> -     u8 parity_byte;
>>> -
>>> -     /* Config header and parity byte 1 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_ISRC, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     new_value = 0x06;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_1_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_1_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 1: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_ISRC, DP_AUDIO_SDP_HEADER_1);
>>> -
>>> -     /* Config header and parity byte 2 */
>>> -     value = msm_dp_audio_get_header(catalog,
>>> -                     DP_AUDIO_SDP_ISRC, DP_AUDIO_SDP_HEADER_2);
>>> -
>>> -     new_value = 0x0F;
>>> -     parity_byte = msm_dp_utils_calculate_parity(new_value);
>>> -     value |= ((new_value << HEADER_BYTE_2_BIT)
>>> -                     | (parity_byte << PARITY_BYTE_2_BIT));
>>> -     drm_dbg_dp(audio->drm_dev,
>>> -                     "Header Byte 2: value = 0x%x, parity_byte = 0x%x\n",
>>> -                     value, parity_byte);
>>> -     msm_dp_audio_set_header(catalog, value,
>>> -             DP_AUDIO_SDP_ISRC, DP_AUDIO_SDP_HEADER_2);
>>> +     struct dp_sdp_header sdp_hdr = {
>>> +             .HB0 = 0x00,
>>> +             .HB1 = 0x06,
>>> +             .HB2 = 0x0f,
>>> +             .HB3 = 0x00,
>>> +     };
>>> +     u32 header[2];
>>> +     u32 reg;
>>> +
>>> +     /* XXX: is it necessary to preserve this field? */
>>> +     reg = msm_dp_read_link(catalog, MMSS_DP_AUDIO_ISRC_1);
>>> +     sdp_hdr.HB3 = FIELD_GET(HEADER_3_MASK, reg);
>>> +
>>> +     msm_dp_utils_pack_sdp_header(&sdp_hdr, header);
>>> +
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_ISRC_0, header[0]);
>>> +     msm_dp_write_link(catalog, MMSS_DP_AUDIO_ISRC_1, header[1]);
>>>    }
>>>
>>>    static void msm_dp_audio_setup_sdp(struct msm_dp_audio_private *audio)
>>>
> 
> 
> 

  reply	other threads:[~2024-12-12 23:53 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-11 23:41 [PATCH v3 00/14] drm/msm/dp: perform misc cleanups Dmitry Baryshkov
2024-12-11 23:41 ` [PATCH v3 01/14] drm/msm/dp: set safe_to_exit_level before printing it Dmitry Baryshkov
2024-12-12  1:14   ` Abhinav Kumar
2024-12-12  8:58     ` Dmitry Baryshkov
2024-12-12 18:31       ` Abhinav Kumar
2024-12-12 18:52         ` Abhinav Kumar
2024-12-12 23:09           ` Dmitry Baryshkov
2024-12-11 23:41 ` [PATCH v3 02/14] drm/msm/dp: fix msm_dp_utils_pack_sdp_header interface Dmitry Baryshkov
2024-12-12  1:23   ` Abhinav Kumar
2024-12-11 23:41 ` [PATCH v3 03/14] drm/msm/dp: drop msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs() Dmitry Baryshkov
2024-12-12  1:13   ` Abhinav Kumar
2024-12-11 23:41 ` [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private() Dmitry Baryshkov
2024-12-12  2:59   ` Abhinav Kumar
2024-12-12  8:52     ` Dmitry Baryshkov
2024-12-12 19:15       ` Abhinav Kumar
2024-12-12 23:09         ` Dmitry Baryshkov
2024-12-14 20:53           ` Abhinav Kumar
2024-12-14 22:05             ` Dmitry Baryshkov
2024-12-16 20:45               ` Abhinav Kumar
2024-12-16 23:24                 ` Dmitry Baryshkov
2024-12-11 23:41 ` [PATCH v3 05/14] drm/msm/dp: move I/O functions to global header Dmitry Baryshkov
2024-12-12 20:26   ` Stephen Boyd
2024-12-11 23:41 ` [PATCH v3 06/14] drm/msm/dp: move/inline AUX register functions Dmitry Baryshkov
2024-12-12 20:26   ` Stephen Boyd
2024-12-11 23:41 ` [PATCH v3 07/14] drm/msm/dp: move/inline ctrl " Dmitry Baryshkov
2024-12-11 23:41 ` [PATCH v3 08/14] drm/msm/dp: move/inline panel related functions Dmitry Baryshkov
2024-12-11 23:41 ` [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets Dmitry Baryshkov
2024-12-12  3:12   ` Abhinav Kumar
2024-12-12  8:53     ` Dmitry Baryshkov
2024-12-12 21:41   ` Abhinav Kumar
2024-12-12 22:28     ` Dmitry Baryshkov
2024-12-12 23:53       ` Abhinav Kumar [this message]
2024-12-13  0:28         ` Dmitry Baryshkov
2024-12-14 18:02           ` Abhinav Kumar
2024-12-11 23:41 ` [PATCH v3 10/14] drm/msm/dp: drop obsolete audio headers access through catalog Dmitry Baryshkov
2024-12-11 23:41 ` [PATCH v3 11/14] drm/msm/dp: move/inline audio related functions Dmitry Baryshkov
2024-12-11 23:41 ` [PATCH v3 12/14] drm/msm/dp: move more AUX functions to dp_aux.c Dmitry Baryshkov
2024-12-11 23:41 ` [PATCH v3 13/14] drm/msm/dp: drop struct msm_dp_panel_in Dmitry Baryshkov
2024-12-12  3:26   ` Abhinav Kumar
2024-12-12  8:53     ` Dmitry Baryshkov
2024-12-12 18:56       ` Abhinav Kumar
2024-12-11 23:41 ` [PATCH v3 14/14] drm/msm/dp: move interrupt handling to dp_ctrl Dmitry Baryshkov
2024-12-12 20:27 ` [PATCH v3 00/14] drm/msm/dp: perform misc cleanups Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9a9ff3a5-5c01-45fd-a89a-b8305baac5bd@quicinc.com \
    --to=quic_abhinavk@quicinc.com \
    --cc=airlied@gmail.com \
    --cc=dianders@chromium.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=quic_parellan@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=simona@ffwll.ch \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®