From: "Trenton D. Adams" <trenton.d.adams@gmail.com>
To: Robert Hancock <hancockrwd@gmail.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Macbook 4G only see 3G
Date: Wed, 10 Jun 2009 22:48:00 -0600 [thread overview]
Message-ID: <9b1675090906102148m5634e652y34c101e28e4aab83@mail.gmail.com> (raw)
In-Reply-To: <4A3086B2.2010900@gmail.com>
On Wed, Jun 10, 2009 at 10:23 PM, Robert Hancock<hancockrwd@gmail.com> wrote:
> Trenton D. Adams wrote:
>> dmtdamac ~ # dmesg
>> Linux version 2.6.30-rc7-dirty (root@tdamac) (gcc version 4.3.2
>> (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #3 SMP Fri Jun 5 21:24:29 MDT
>> 2009
>> Command line: root=/dev/ram0 init=/linuxrc real_root=/dev/s/sys dolvm
>> hung_task_show_state=1
>> KERNEL supported cpus:
>> Intel GenuineIntel
>> AMD AuthenticAMD
>> Centaur CentaurHauls
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 00000000be08c000 (usable)
>> BIOS-e820: 00000000be08c000 - 00000000be28d000 (ACPI NVS)
>> BIOS-e820: 00000000be28d000 - 00000000beebe000 (ACPI data)
>> BIOS-e820: 00000000beebe000 - 00000000beeef000 (ACPI NVS)
>> BIOS-e820: 00000000beeef000 - 00000000bef00000 (ACPI data)
>> BIOS-e820: 00000000bef00000 - 00000000c0000000 (reserved)
>> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
>> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>
> The e820 map is the way that the BIOS tells us what memory is available.
> Here it's only showing about 3040MB of usable memory, all below 4GB. The
> usual way that it should work with 4GB of RAM is that the portion of the
> memory corresponding to the address space occupied for PCI devices, etc.
> gets relocated above 4GB. However either the chipset in your machine
> doesn't support memory hole remapping, the BIOS doesn't bother to use it or
> it doesn't bother to tell Linux where it is..
>
> Do you know if Mac OS X is actually use all 4GB, or is it doing the "well,
> we can see there's actually 4GB installed but we won't mention that we can't
> use it all" trick, like some Windows does?
>
That is very well possible. It did appear to have over 3G free, if I
recall correctly. I'll try booting into Mac OS X again and see.
> Your dmesg shows your chiset is 945GM.
> ==
> intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 16124kB
> intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
> intelfb: Video mode must be programmed at boot time.
> ==
> As far as I can found in English/Japanese forum, 945GM/PM? series can't handle
> 4G memory. (Then, 64bit Vista can't handle it, either)
That's my graphics card though, not my motherboard chipset. The
chipset is ICH7.
tdamac ~ # lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller (rev 03)
00:07.0 Performance counters: Intel Corporation Device 27a3 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family)
SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053
PCI-E Gigabit Ethernet Controller (rev 22)
02:00.0 Network controller: Atheros Communications Inc. AR5418
802.11abgn Wireless PCI Express Adapter (rev 01)
03:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
next prev parent reply other threads:[~2009-06-11 4:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-11 0:47 Trenton D. Adams
2009-06-11 0:54 ` Yinghai Lu
2009-06-11 2:21 ` KAMEZAWA Hiroyuki
2009-06-11 2:43 ` Trenton D. Adams
2009-06-11 4:23 ` Robert Hancock
2009-06-11 4:48 ` Trenton D. Adams [this message]
2009-06-11 10:59 ` Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9b1675090906102148m5634e652y34c101e28e4aab83@mail.gmail.com \
--to=trenton.d.adams@gmail.com \
--cc=hancockrwd@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®