Re: [PATCH v5 0/2] Add device tree for ASRock Rack ALTRAD8 BMC

[Tan Siewert <tan.siewert@hetzner.com>]

[-- Attachment #1.1: Type: text/plain, Size: 1288 bytes --]

On 11.12.25 17:56, Rebecca Cran wrote:
> The ASRock Rack ALTRAD8 BMC is an Aspeed AST2500-based BMC for the
> ALTRAD8UD-1L2T and ALTRAD8UD2-1L2Q boards with an Ampere Altra
> processor. The BMC runs OpenBMC.
> 
> These patches add a device tree and binding for the BMC.
> 
> **Changes between v4 and v5**
> 
> - Removed the uartx-mode1 GPIOs, which were wrong.
> - Fixed button-power-n GPIO name.
> - Removed backslash from end of line, which isn't needed.
> - Removed duplicate/wrong bmc heartbeat GPIO.
> 
> **Testing**
> 
> Ran `make ARCH=arm CHECK_DTBS=y aspeed/aspeed-bmc-asrock-altrad8.dtb`.
> 
> 
> Rebecca Cran (2):
>    dt-bindings: arm: aspeed: add ASRock Rack ALTRAD8 board
>    ARM: dts: aspeed: add device tree for ASRock Rack ALTRAD8 BMC
> 
>   Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml |   1 +
>   arch/arm/boot/dts/aspeed/Makefile                        |   1 +
>   arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-altrad8.dts   | 624 ++++++++++++++++++++
>   3 files changed, 626 insertions(+)
>   create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-altrad8.dts
> 

For the series,

Tested-by: Tan Siewert <tan.siewert@hetzner.com>
Reviewed-by: Tan Siewert <tan.siewert@hetzner.com>

Many thanks, Rebecca!

-- Tan

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]