mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rodolfo Giometti <giometti@enneenne.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Herve Codina <herve.codina@bootlin.com>,
	Christopher Cordahi <christophercordahi@nanometrics.ca>,
	Bastien Curutchet <bastien.curutchet@bootlin.com>
Subject: Re: [PATCH RESEND v3 1/1] pps: clients: gpio: Bypass edge's direction check when not needed
Date: Wed, 4 Dec 2024 13:53:11 +0100	[thread overview]
Message-ID: <9b62866a-8e8d-490d-9e45-4a6afa1c3559@enneenne.com> (raw)
In-Reply-To: <20241204122700.1203310-1-bastien.curutchet@bootlin.com>

Greg, Andrew, this patch is ready for the inclusion.

Acked-by: Rodolfo Giometti <giometti@enneenne.com>

On 04/12/24 13:27, Bastien Curutchet wrote:
> In the IRQ handler, the GPIO's state is read to verify the direction of
> the edge that triggered the interruption before generating the PPS event.
> If a pulse is too short, the GPIO line can reach back its original state
> before this verification and the PPS event is lost.
> 
> This check is needed when info->capture_clear is set because it needs
> interruptions on both rising and falling edges. When info->capture_clear
> is not set, interruption is triggered by one edge only so this check can
> be omitted.
> 
> Add a warning if irq_handler is left without triggering any PPS event.
> Bypass the edge's direction verification when info->capture_clear is not
> set.
> 
> Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
> Acked-by: Rodolfo Giometti <giometti@enneenne.com>
> ---
> Changes in v3:
>   - Add a warning in irq_handler
> Changes in v2:
>   - Modifiy the way the bypass is done to avoid code duplication
> 
> v1: https://lore.kernel.org/all/20240410113502.73038-1-bastien.curutchet@bootlin.com/
> v2: https://lore.kernel.org/all/20240411061329.7262-1-bastien.curutchet@bootlin.com/
> 
>   drivers/pps/clients/pps-gpio.c | 6 +++++-
>   1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
> index 2f4b11b4dfcd..af62d944d051 100644
> --- a/drivers/pps/clients/pps-gpio.c
> +++ b/drivers/pps/clients/pps-gpio.c
> @@ -52,7 +52,9 @@ static irqreturn_t pps_gpio_irq_handler(int irq, void *data)
>   
>   	info = data;
>   
> -	rising_edge = gpiod_get_value(info->gpio_pin);
> +	/* Small trick to bypass the check on edge's direction when capture_clear is unset */
> +	rising_edge = info->capture_clear ?
> +		      gpiod_get_value(info->gpio_pin) : !info->assert_falling_edge;
>   	if ((rising_edge && !info->assert_falling_edge) ||
>   			(!rising_edge && info->assert_falling_edge))
>   		pps_event(info->pps, &ts, PPS_CAPTUREASSERT, data);
> @@ -60,6 +62,8 @@ static irqreturn_t pps_gpio_irq_handler(int irq, void *data)
>   			((rising_edge && info->assert_falling_edge) ||
>   			(!rising_edge && !info->assert_falling_edge)))
>   		pps_event(info->pps, &ts, PPS_CAPTURECLEAR, data);
> +	else
> +		dev_warn_ratelimited(info->pps->dev, "IRQ did not trigger any PPS event\n");
>   
>   	return IRQ_HANDLED;
>   }

-- 
GNU/Linux Solutions                  e-mail: giometti@enneenne.com
Linux Device Driver                          giometti@linux.it
Embedded Systems                     phone:  +39 349 2432127
UNIX programming


      reply	other threads:[~2024-12-04 12:53 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-04 12:27 Bastien Curutchet
2024-12-04 12:53 ` Rodolfo Giometti [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9b62866a-8e8d-490d-9e45-4a6afa1c3559@enneenne.com \
    --to=giometti@enneenne.com \
    --cc=akpm@linux-foundation.org \
    --cc=bastien.curutchet@bootlin.com \
    --cc=christophercordahi@nanometrics.ca \
    --cc=gregkh@linuxfoundation.org \
    --cc=herve.codina@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®