Re: [PATCH 5/5] arm64: dts: rockchip: Add rock-5a board

[Michael Riesch <michael.riesch@wolfvision.net>]

Hi Sebastian,

On 11/8/22 18:15, Sebastian Reichel wrote:
> Add board file for the RK3588s Rock 5A board. While the hardware
> offers plenty of peripherals and connectivity this basic implementation
> just handles things required to access eMMC, UART and Ethernet (i.e.
> enough to successfully boot Linux).
> 
> Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  .../devicetree/bindings/arm/rockchip.yaml     |  5 ++
>  arch/arm64/boot/dts/rockchip/Makefile         |  1 +
>  .../boot/dts/rockchip/rk3588s-rock-5a.dts     | 63 +++++++++++++++++++
>  3 files changed, 69 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index 4230881371fa..6bff4c42d815 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -744,6 +744,11 @@ properties:
>            - const: rockchip,rk3588-evb1-v10
>            - const: rockchip,rk3588
>  
> +      - description: Radxa Rock 5A
> +        items:
> +          - const: radxa,rock-5a

FYI: I was wondering what the convention was when I submitted the
rk3568-rock-3a.dts. There are boards with the compatible
"radxa,rockpi4a", "radxa,rockpi4b", "radxa,rockpis", but also the
"radxa,rock-4c-plus". I went with the slight majority and named it
"radxa,rock3a". Maybe you would like to consider "radxa,rock5a" in order
to follow suit.

Best regards,
Michael

> +          - const: rockchip,rk3588s
> +
>  additionalProperties: true
>  
>  ...
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 12ed53de11eb..31fa55750a0f 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -73,3 +73,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> new file mode 100644
> index 000000000000..25387a000341
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include "rk3588s.dtsi"
> +
> +/ {
> +	model = "Radxa Rock 5A Board";
> +	compatible = "radxa,rock-5a", "rockchip,rk3588s";
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +};
> +
> +&gmac1 {
> +	phy-mode = "rgmii-rxid";
> +	clock_in_out = "output";
> +
> +	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> +	snps,reset-active-low;
> +	/* Reset time is 20ms, 100ms for rtl8211f */
> +	snps,reset-delays-us = <0 20000 100000>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&gmac1_miim
> +		     &gmac1_tx_bus2
> +		     &gmac1_rx_bus2
> +		     &gmac1_rgmii_clk
> +		     &gmac1_rgmii_bus>;
> +
> +	tx_delay = <0x3a>;
> +	rx_delay = <0x3e>;
> +
> +	phy-handle = <&rgmii_phy1>;
> +	status = "okay";
> +};
> +
> +&mdio1 {
> +	rgmii_phy1: phy@1 {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <0x1>;
> +		#phy-cells = <0>;
> +	};
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	max-frequency = <200000000>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-0 = <&uart2m0_xfer>;
> +	status = "okay";
> +};