PROBLEM: (libata) cdrom drive not detected in -mm series

["Nelson A. de Oliveira" <naoliv@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1769 bytes --]

Hi!

My USB CD-ROM drive (that is detected as a SCSI drive) is not being
detected on the -mm series of the Kernel.

With a 2.6.18-rc6-mm1 tree and after some bisection work, I've found
that the problem is somewhere on these patches:

git-libata-all.patch
libata-ignore-cfa-signature-while-sanity-checking-an-atapi-device.patch
kerneldoc-error-on-ata_piixc.patch
libata-add-40pin-short-cable-support-honour-drive.patch
libata-add-40pin-short-cable-support-honour-drive-fix.patch
asus-mv-device-ids.patch
1-of-2-jmicron-driver.patch
1-of-2-jmicron-driver-fix.patch
2-of-2-jmicron-driver-plumbing-and-quirk.patch
2-of-2-jmicron-driver-plumbing-and-quirk-cleanup.patch
non-libata-driver-for-jmicron-devices.patch
via-pata-controller-xfer-fixes.patch
via-pata-controller-xfer-fixes-fix.patch
via-sata-oops-on-init.patch
libata_resume_fix.patch

Doing a "quilt push
fail-kernel-compilation-in-case-of-unresolved-symbols-v2" (that is the
patch right before the ones from libata), I get a working Kernel, that
detects perfectly my CD-ROM drive.
With a "quilt push libata_resume_fix" (so all the libata changes get
included), the resulting Kernel doesn't detect my CD-ROM drive.

With the libata things applied I can see on /proc/devices:

(...)
Block devices:
  7 loop
  8 sd
 11 sr

But even with sr_mod loaded, I can't get any /dev/sr0 or /dev/scd0.
Since udev is the same with all the tests and /dev/scd0 is there
without libata updates applied, I think that it's something not with
udev, but with the Kernel.

I am sending attached a diff file against dmseg of a working
2.6.18-rc6 against a non-working 2.6.18-rc6-mm1 and also the config
file that I am using with 2.6.18-rc6-mm1

Please, CC me with any answers, questions, etc.

Thank you very much!

Best regards,
Nelson

[-- Attachment #2: diff --]
[-- Type: application/octet-stream, Size: 10811 bytes --]

--- dmesg_working	2006-09-11 18:47:11.000000000 -0300
+++ dmesg_mm	2006-09-11 21:49:32.000000000 -0300
@@ -1,4 +1,4 @@
-Linux version 2.6.18-rc6 (root@orthrus) (gcc version 4.2.0 20060905 (experimental) (Debian 4.2-20060905-1)) #1 SMP PREEMPT Mon Sep 11 18:44:00 BRT 2006
+Linux version 2.6.18-rc6 (root@orthrus) (gcc version 4.2.0 20060905 (experimental) (Debian 4.2-20060905-1)) #12 SMP PREEMPT Mon Sep 11 21:47:42 BRT 2006
 BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
@@ -40,7 +40,7 @@
 Enabling APIC mode:  Flat.  Using 1 I/O APICs
 Using ACPI (MADT) for SMP configuration information
 Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
-Detected 1662.551 MHz processor.
+Detected 1662.618 MHz processor.
 Built 1 zonelists.  Total pages: 128723
 Kernel command line: root=/dev/sda5 ro 
 mapped APIC to ffffd000 (fee00000)
@@ -52,9 +52,9 @@
 Console: colour VGA+ 80x25
 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
 Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
-Memory: 507712k/514892k available (1399k kernel code, 6620k reserved, 372k data, 164k init, 0k highmem)
+Memory: 507708k/514892k available (1404k kernel code, 6624k reserved, 371k data, 164k init, 0k highmem)
 Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Calibrating delay using timer specific routine.. 3327.38 BogoMIPS (lpj=1663694)
+Calibrating delay using timer specific routine.. 3327.45 BogoMIPS (lpj=1663726)
 Mount-cache hash table entries: 512
 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
@@ -73,7 +73,7 @@
 CPU0: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
 Booting processor 1/1 eip 2000
 Initializing CPU#1
-Calibrating delay using timer specific routine.. 3324.56 BogoMIPS (lpj=1662280)
+Calibrating delay using timer specific routine.. 3324.57 BogoMIPS (lpj=1662285)
 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
 monitor/mwait feature present.
@@ -85,14 +85,14 @@
 Intel machine check architecture supported.
 Intel machine check reporting enabled on CPU#1.
 CPU1: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
-Total of 2 processors activated (6651.94 BogoMIPS).
+Total of 2 processors activated (6652.02 BogoMIPS).
 ENABLING IO-APIC IRQs
 ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
 checking TSC synchronization across 2 CPUs: 
-CPU#0 had -859685 usecs TSC skew, fixed it up.
-CPU#1 had 859685 usecs TSC skew, fixed it up.
+CPU#0 had -858056 usecs TSC skew, fixed it up.
+CPU#1 had 858056 usecs TSC skew, fixed it up.
 Brought up 2 CPUs
-migration_cost=51
+migration_cost=48
 NET: Registered protocol family 16
 ACPI: bus type pci registered
 PCI: Using MMCONFIG
@@ -158,23 +158,19 @@
 io scheduler cfq registered (default)
 Real Time Clock Driver v1.12ac
 libata version 2.00 loaded.
-ata_piix 0000:00:1f.2: version 2.00
+ata_piix 0000:00:1f.2: version 2.00ac7
 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
 PCI: Setting latency timer of device 0000:00:1f.2 to 64
 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
+ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
 scsi0 : ata_piix
 ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32)
 ata1.00: ata1: dev 0 multi count 8
 ata1.00: configured for UDMA/100
+scsi1 : ata_piix
   Vendor: ATA       Model: FUJITSU MHV2080B  Rev: 0085
   Type:   Direct-Access                      ANSI SCSI revision: 05
-ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
-scsi1 : ata_piix
-ata2.00: ATAPI, max UDMA/33
-ata2.00: configured for UDMA/33
-  Vendor: HL-DT-ST  Model: CDRW/DVD GCC4244  Rev: B101
-  Type:   CD-ROM                             ANSI SCSI revision: 05
 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
 sda: Write Protect is off
 sda: Mode Sense: 00 3a 00 00
@@ -185,8 +181,8 @@
 SCSI device sda: drive cache: write back
  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
 sd 0:0:0:0: Attached scsi disk sda
-serio: i8042 AUX port at 0x60,0x64 irq 12
 serio: i8042 KBD port at 0x60,0x64 irq 1
+serio: i8042 AUX port at 0x60,0x64 irq 12
 TCP bic registered
 NET: Registered protocol family 1
 NET: Registered protocol family 17
@@ -198,18 +194,15 @@
 EXT3-fs: mounted filesystem with writeback data mode.
 VFS: Mounted root (ext3 filesystem) readonly.
 Freeing unused kernel memory: 164k freed
-b44.c:v1.01 (Jun 16, 2006)
-ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
-eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:1b:e1:de
-usbcore: registered new driver usbfs
-usbcore: registered new driver hub
 Linux agpgart interface v0.101 (c) Dave Jones
 agpgart: Detected an Intel 945GM Chipset.
 agpgart: Detected 7932K stolen memory.
+usbcore: registered new driver usbfs
+usbcore: registered new driver hub
 agpgart: AGP aperture is 256M @ 0xc0000000
-sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
-Uniform CD-ROM driver Revision: 3.20
-sr 1:0:0:0: Attached scsi CD-ROM sr0
+b44.c:v1.01 (Jun 16, 2006)
+ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
+eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:1b:e1:de
 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
 USB Universal Host Controller Interface driver v3.0
 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
@@ -220,63 +213,59 @@
 usb usb1: configuration #1 chosen from 1 choice
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 2 ports detected
-sd 0:0:0:0: Attached scsi generic sg0 type 0
-sr 1:0:0:0: Attached scsi generic sg1 type 5
 Intel 82802 RNG detected
+ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
+PCI: Setting latency timer of device 0000:00:1d.7 to 64
+ehci_hcd 0000:00:1d.7: EHCI Host Controller
+ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
+ehci_hcd 0000:00:1d.7: debug port 1
+PCI: cache line size of 32 is not supported by device 0000:00:1d.7
+ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000
+ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+usb usb2: configuration #1 chosen from 1 choice
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 8 ports detected
 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
 PCI: Setting latency timer of device 0000:00:1d.1 to 64
 uhci_hcd 0000:00:1d.1: UHCI Host Controller
-uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
+uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
 uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60
-usb usb2: configuration #1 chosen from 1 choice
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 2 ports detected
-ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
-PCI: Setting latency timer of device 0000:00:1d.2 to 64
-uhci_hcd 0000:00:1d.2: UHCI Host Controller
-uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
-uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
 usb usb3: configuration #1 chosen from 1 choice
 hub 3-0:1.0: USB hub found
 hub 3-0:1.0: 2 ports detected
 input: PS/2 Mouse as /class/input/input1
 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
+ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
+PCI: Setting latency timer of device 0000:00:1d.2 to 64
+uhci_hcd 0000:00:1d.2: UHCI Host Controller
+uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
+uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
+usb usb4: configuration #1 chosen from 1 choice
+hub 4-0:1.0: USB hub found
+hub 4-0:1.0: 2 ports detected
 mice: PS/2 mouse device common for all mice
 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
 PCI: Setting latency timer of device 0000:00:1d.3 to 64
 uhci_hcd 0000:00:1d.3: UHCI Host Controller
-uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
+uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
 uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20
-usb usb4: configuration #1 chosen from 1 choice
-hub 4-0:1.0: USB hub found
-hub 4-0:1.0: 2 ports detected
-usb 1-2: new full speed USB device using uhci_hcd and address 2
-ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
-PCI: Setting latency timer of device 0000:00:1d.7 to 64
-ehci_hcd 0000:00:1d.7: EHCI Host Controller
-ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
-ehci_hcd 0000:00:1d.7: debug port 1
-PCI: cache line size of 32 is not supported by device 0000:00:1d.7
-ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000
-ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
 usb usb5: configuration #1 chosen from 1 choice
 hub 5-0:1.0: USB hub found
-hub 5-0:1.0: 8 ports detected
+hub 5-0:1.0: 2 ports detected
+usb 2-2: new high speed USB device using ehci_hcd and address 2
 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
 PCI: Setting latency timer of device 0000:00:1b.0 to 64
-usb 1-2: device not accepting address 2, error -71
-usb 5-2: new high speed USB device using ehci_hcd and address 2
-usb 5-2: configuration #1 chosen from 1 choice
-hub 5-2:1.0: USB hub found
-hub 5-2:1.0: 4 ports detected
-Adding 979924k swap on /dev/sda6.  Priority:-1 extents:1 across:979924k
-usb 2-2: new low speed USB device using uhci_hcd and address 2
-EXT3 FS on sda5, internal journal
 usb 2-2: configuration #1 chosen from 1 choice
+hub 2-2:1.0: USB hub found
+hub 2-2:1.0: 4 ports detected
+usb 3-2: new low speed USB device using uhci_hcd and address 2
+usb 3-2: configuration #1 chosen from 1 choice
 input: Genius NetScroll + Traveler as /class/input/input3
 input: USB HID v1.10 Mouse [Genius NetScroll + Traveler] on usb-0000:00:1d.1-2
 usbcore: registered new driver usbhid
 drivers/usb/input/hid-core.c: v2.6:USB HID core driver
+Adding 979924k swap on /dev/sda6.  Priority:-1 extents:1 across:979924k
+EXT3 FS on sda5, internal journal
 loop: loaded (max 8 devices)
 ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
 ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
@@ -299,6 +288,6 @@
 ACPI: Lid Switch [LID]
 ACPI: Power Button (CM) [PBTN]
 ACPI: Sleep Button (CM) [SBTN]
-ACPI: Thermal Zone [THM] (47 C)
+ACPI: Thermal Zone [THM] (42 C)
 b44: eth0: Link is up at 10 Mbps, half duplex.
 b44: eth0: Flow control is off for TX and off for RX.

[-- Attachment #3: config --]
[-- Type: application/octet-stream, Size: 5336 bytes --]

CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_SMP=y
CONFIG_X86_PC=y
CONFIG_MPENTIUM4=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_VM86=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
CONFIG_VMSPLIT_3G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MTRR=y
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_ISA_DMA_API=y
CONFIG_BINFMT_ELF=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_FIB_HASH=y
CONFIG_SYN_COOKIES=y
CONFIG_TCP_CONG_BIC=y
CONFIG_WIRELESS_EXT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_ATA=y
CONFIG_ATA_PIIX=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_NET_PCI=y
CONFIG_B44=m
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_RTC=y
CONFIG_AGP=m
CONFIG_AGP_INTEL=m
CONFIG_DRM=m
CONFIG_DRM_I915=m
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_I801=m
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_HDA_INTEL=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_STORAGE=m
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_DNOTIFY=y
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_CIFS=m
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRC32=m
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y