Re: [PATCH 2/3] arm64: dts: ti: k3-j722s: Redefine USB1 node description

[Andrew Davis <afd@ti.com>]

On 4/29/24 7:09 AM, Ravi Gunasekaran wrote:
> USB1 controller on J722S and AM62P are from different vendors.
> Redefine the USB1 node description for J722S by deleting the
> node inherited from AM62P dtsi.
> 
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-j722s.dtsi | 39 ++++++++++++++++++++++++++++
>   1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
> index beba5a3ea6cc..90725eeb3178 100644
> --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
> @@ -13,6 +13,13 @@
>   
>   #include "k3-am62p5.dtsi"
>   
> +/*
> + * USB1 controller on AM62P and J722S are of different IP.
> + * Delete AM62P's USBSS1 node definition and redefine it for J722S.
> + */
> +
> +/delete-node/ &usbss1;
> +
>   / {
>   	model = "Texas Instruments K3 J722S SoC";
>   	compatible = "ti,j722s";
> @@ -120,6 +127,38 @@
>   			status = "disabled"; /* Needs lane config */
>   		};
>   	};
> +
> +	usbss1: cdns-usb@f920000 {

MAIN domain items are defined in -main.dtsi files, for instance the
USB node you are overriding was defined in k3-am62p-main.dtsi.
This should go in a file named k3-j722s-main.dtsi.

Andrew

> +		compatible = "ti,j721e-usb";
> +		reg = <0x00 0x0f920000 0x00 0x100>;
> +		ranges;
> +		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 278 3>, <&k3_clks 278 1>;
> +		clock-names = "ref", "lpm";
> +		assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */
> +		assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		status = "disabled";
> +
> +		usb1: usb@31200000{
> +			compatible = "cdns,usb3";
> +			reg = <0x00 0x31200000 0x00 0x10000>,
> +			      <0x00 0x31210000 0x00 0x10000>,
> +			      <0x00 0x31220000 0x00 0x10000>;
> +			reg-names = "otg",
> +				    "xhci",
> +				    "dev";
> +			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
> +				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
> +			interrupt-names = "host",
> +					  "peripheral",
> +					  "otg";
> +			maximum-speed = "super-speed";
> +			dr_mode = "otg";
> +		};
> +	};
>   };
>   
>   /* Main domain overrides */