From: Neil Armstrong <neil.armstrong@linaro.org>
To: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org, Conor Dooley <conor+dt@kernel.org>,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
linux-arm-msm@vger.kernel.org,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Bjorn Andersson <andersson@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Subject: Re: [PATCH v4 0/3] arm64: qcom: sm8650: add support for the SM8650-HDK board
Date: Mon, 22 Apr 2024 18:05:03 +0200 [thread overview]
Message-ID: <9c83bd1e-8753-4f25-a1d9-97f106db4bb2@linaro.org> (raw)
In-Reply-To: <171378646269.749144.3843772037586831461.robh@kernel.org>
On 22/04/2024 13:50, Rob Herring wrote:
>
> On Mon, 22 Apr 2024 10:48:11 +0200, Neil Armstrong wrote:
>> The SM8650-HDK is an embedded development platforms for the
>> Snapdragon 8 Gen 3 SoC aka SM8650, with the following features:
>> - Qualcomm SM8650 SoC
>> - 16GiB On-board LPDDR5
>> - On-board WiFi 7 + Bluetooth 5.3/BLE
>> - On-board UFS4.0
>> - M.2 Key B+M Gen3x2 PCIe Slot
>> - HDMI Output
>> - USB-C Connector with DP Almode & Audio Accessory mode
>> - Micro-SDCard Slot
>> - Audio Jack with Playback and Microphone
>> - 2 On-board Analog microphones
>> - 2 On-board Speakers
>> - 96Boards Compatible Low-Speed and High-Speed connectors [1]
>> - For Camera, Sensors and external Display cards
>> - Compatible with the Linaro Debug board [2]
>> - SIM Slot for Modem
>> - Debug connectors
>> - 6x On-Board LEDs
>>
>> An optional Display Card kit can be connected on top,
>> an overlay is handled to add support for the DSI Display
>> and Touch Controller.
>>
>> Product Page: [3]
>>
>> Build Dependencies: None
>>
>> Functional Dependencies:
>> - PCIe 1 PHY AUX Clock: https://lore.kernel.org/all/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-0-3ec0a966d52f@linaro.org/
>> - PCI-MSI Fix: https://lore.kernel.org/all/20240318-pci-bdf-sid-fix-v1-3-acca6c5d9cf1@linaro.org/
>> - UCSI Fix: https://lore.kernel.org/all/20240315171836.343830-1-jthies@google.com/
>> - USB IRQs DT check fix: https://lore.kernel.org/all/20240314-topic-sm8650-upstream-usb-dt-irq-fix-v1-1-ea8ab2051869@linaro.org/
>>
>> [1] https://www.96boards.org/specifications/
>> [2] https://git.codelinaro.org/linaro/qcomlt/debugboard
>> [3] https://www.lantronix.com/products/snapdragon-8-gen-3-mobile-hardware-development-kit/
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---
>> Changes in v4:
>> - Rebased on next and fixed the apply failures
>> - Link to v3: https://lore.kernel.org/r/20240325-topic-sm8650-upstream-hdk-v3-0-4f365d7932af@linaro.org
>>
>> Changes in v3:
>> - fixed regulator node name to fix ordering
>> - deleted pcie_1_phy_aux clock
>> - removed undeeded mdss_mdp status okay
>> - collected revied & tested tags
>> - Link to v2: https://lore.kernel.org/r/20240318-topic-sm8650-upstream-hdk-v2-0-b63a5d45a784@linaro.org
>>
>> Changes in v2:
>> - Fixed commit messages with links, and recently added product page URL
>> - Swapped i2c3/i2c6 nodes
>> - Moved pcie_1_phy_aux_clk under pcie1_phy
>> - Removed duplicate mdp_vsync pinctrl state
>> - Collected review & tested tags
>> - Link to v1: https://lore.kernel.org/r/20240223-topic-sm8650-upstream-hdk-v1-0-ccca645cd901@linaro.org
>>
>> ---
>> Neil Armstrong (3):
>> dt-bindings: arm: qcom: Document the HDK8650 board
>> arm64: dts: qcom: sm8650: add support for the SM8650-HDK board
>> arch: arm64: dts: sm8650-hdk: add support for the Display Card overlay
>>
>> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>> arch/arm64/boot/dts/qcom/Makefile | 5 +
>> .../boot/dts/qcom/sm8650-hdk-display-card.dtso | 144 +++
>> arch/arm64/boot/dts/qcom/sm8650-hdk.dts | 1251 ++++++++++++++++++++
>> 4 files changed, 1401 insertions(+)
>> ---
>> base-commit: a8e1147ee205e7b8dfe18094ed39552a982857f1
>> change-id: 20240223-topic-sm8650-upstream-hdk-e21cfd6f1de8
>>
>> Best regards,
>> --
>> Neil Armstrong <neil.armstrong@linaro.org>
>>
>>
>>
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y qcom/sm8650-hdk.dtb' for 20240422-topic-sm8650-upstream-hdk-v4-0-b33993eaa2e8@linaro.org:
>
> arch/arm64/boot/dts/qcom/sm8650-hdk.dtb: pcie-1-phy-aux-clk: 'clock-frequency' is a required property
> from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
> arch/arm64/boot/dts/qcom/sm8650-hdk.dtb: phy@1c0e000: clock-output-names: ['pcie1_pipe_clk'] is too short
> from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
> arch/arm64/boot/dts/qcom/sm8650-hdk.dtb: phy@1c0e000: #clock-cells:0:0: 1 was expected
> from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
Thx, this is fixed by https://lore.kernel.org/all/20240422-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v3-0-799475a27cce@linaro.org/
Neil
>
>
>
>
>
next prev parent reply other threads:[~2024-04-22 16:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-22 8:48 Neil Armstrong
2024-04-22 8:48 ` [PATCH v4 1/3] dt-bindings: arm: qcom: Document the HDK8650 board Neil Armstrong
2024-04-22 8:48 ` [PATCH v4 2/3] arm64: dts: qcom: sm8650: add support for the SM8650-HDK board Neil Armstrong
2024-04-22 8:48 ` [PATCH v4 3/3] arch: arm64: dts: sm8650-hdk: add support for the Display Card overlay Neil Armstrong
2024-05-07 14:18 ` Konrad Dybcio
2024-04-22 11:50 ` [PATCH v4 0/3] arm64: qcom: sm8650: add support for the SM8650-HDK board Rob Herring
2024-04-22 16:05 ` Neil Armstrong [this message]
2024-05-27 3:00 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9c83bd1e-8753-4f25-a1d9-97f106db4bb2@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®