From: Martin Kepplinger <martin.kepplinger@puri.sm>
To: Lucas Stach <l.stach@pengutronix.de>,
Adam Ford <aford173@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
peng.fan@nxp.com, festevam@gmail.com, lgirdwood@gmail.com
Cc: linux-media <linux-media@vger.kernel.org>,
NXP Linux Team <linux-imx@nxp.com>,
arm-soc <linux-arm-kernel@lists.infradead.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
kernel@puri.sm
Subject: Re: soc: imx: gpcv2: regulator issue with system suspend on imx8mq
Date: Thu, 09 Jun 2022 14:57:28 +0200 [thread overview]
Message-ID: <9ca308543e0acf401b465499217393091b6dad22.camel@puri.sm> (raw)
In-Reply-To: <2d5d3bbec443742506e39488dbfbf724bb4ca93f.camel@puri.sm>
Am Donnerstag, dem 09.06.2022 um 11:41 +0200 schrieb Martin Kepplinger:
> hi Lucas and all interested in suspend to ram on imx8mq,
>
> This is slighly repeating my previous observations that still apply,
> but summarizing the situation:
>
> s2idle should work on mainline when looking at the implementations of
> platform drivers. With the missing bits
> https://source.codeaurora.org/external/imx/linux-imx/commit/?h=imx_5.10.35_2.0.0_imx8ulp_er&id=ab850d655c22df562c27c9d6775a26b6df6865b5
> and
> https://lore.kernel.org/linux-arm-kernel/1631554694-9599-7-git-send-email-abel.vesa@nxp.com/
> suspend to ram should work too,
> and it does for me, except when a power domain is using a board-
> regulator as power-supply that is not always-on, but controlled by a
> driver. (when I describe these as "always-on", things are fine
> (except
> for unrelated edgecases)) here's the example I'm running where I
> don't
> describe "buck3" as always-on, but etnaviv runtime pm is controlling
> it:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi#n1161
> When starting to resume, the following happens:
>
> [ 139.985440] Enabling non-boot CPUs ...
> [ 139.990363] Detected VIPT I-cache on CPU1
> [ 139.990413] GICv3: CPU1: found redistributor 1 region
> 0:0x00000000388a0000
> [ 139.990487] CPU1: Booted secondary processor 0x0000000001
> [0x410fd034]
> [ 139.991445] CPU1 is up
> [ 140.011836] Detected VIPT I-cache on CPU2
> [ 140.011852] GICv3: CPU2: found redistributor 2 region
> 0:0x00000000388c0000
> [ 140.011876] CPU2: Booted secondary processor 0x0000000002
> [0x410fd034]
> [ 140.012284] CPU2 is up
> [ 140.032739] Detected VIPT I-cache on CPU3
> [ 140.032756] GICv3: CPU3: found redistributor 3 region
> 0:0x00000000388e0000
> [ 140.032780] CPU3: Booted secondary processor 0x0000000003
> [0x410fd034]
> [ 140.033310] CPU3 is up
> [ 140.158791] imx-pgc imx-pgc-domain.5: failed to enable regulator:
> -
> 110
the call trace here is
[ 901.637677] imx_pgc_power_up+0x2e0/0x330
[ 901.641696] _genpd_power_on+0x80/0x16c
[ 901.645540] genpd_sync_power_on.part.0+0xac/0xe0
[ 901.650248] genpd_resume_noirq+0x70/0x120
[ 901.654347] dpm_run_callback+0x60/0x1f0
[ 901.658271] device_resume_noirq+0x108/0x230
[ 901.662542] dpm_noirq_resume_devices+0x12c/0x334
[ 901.667248] dpm_resume_noirq+0x1c/0x30
[ 901.671085] suspend_devices_and_enter+0x31c/0x894
[ 901.675884] pm_suspend+0x3a0/0x41c
[ 901.679374] state_store+0x98/0x120
[ 901.682864] kobj_attr_store+0x1c/0x30
[ 901.686621] sysfs_kf_write+0x50/0x60
>
> trying runtime-resume in system-suspend for i2c busses didn't help me
> here for example. What's your idea for solving this? (regulator
> always-
> on is not an acceptable workaround :) I'm always happy to test
> concrete
> ideas and would like to know from anyone who uses system suspend on
> imx8mq.
>
> history
> -------
> last time this came to my attention via the mainling lists was the
> VPU
> addition:
> https://lore.kernel.org/linux-arm-kernel/8ed3a28d59b442b531e68e95d83b187bb3392940.camel@puri.sm/
> but for the above logs and all current tests, I ignore the VPU (set
> the
> power-supply always-on) simply because the the driver is in staging
> and
> seems to create a different problem when suspending, and the GPU
> power-
> supply example is very well suited to highlight the problem.
>
> but before that, "gpcv2: support systemd suspend/resume"
> (
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=da4112230f86
> ) didn't work for me, see:
> https://lore.kernel.org/all/a20ecd639f8e8b7fa4a9bed7a8e9590225262784.camel@puri.sm/
>
> thanks a lot,
>
> martin
>
>
prev parent reply other threads:[~2022-06-09 12:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-09 9:41 Martin Kepplinger
2022-06-09 12:57 ` Martin Kepplinger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9ca308543e0acf401b465499217393091b6dad22.camel@puri.sm \
--to=martin.kepplinger@puri.sm \
--cc=aford173@gmail.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=l.stach@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®