Re: [PATCH v3] scsi: libsas: Fix set zero-address when device-type != NO_DEVICE

[yangxingui <yangxingui@huawei.com>]

Hi, John

Thanks for you reply.

On 2023/11/16 18:13, John Garry wrote:
> On 16/11/2023 03:52, Xingui Yang wrote:
> 
> I think that patch title can be improved, but I would need to know more 
> about the problem before suggesting an improvement.
How about "Fix port add phy failed" ?
> 
>> Firstly, when ex_phy is added to the parent port, ex_phy->port is not 
>> set.
> 
> That seems correct, but why mention this now?
> 
>> As a result, sas_port_delete_phy() won't be called in
>> sas_unregister_devs_sas_addr(), and although ex_phy's sas_address is 
>> zero,
>> it is not deleted from the parent port's phy_list.
> 
> I am not sure why you mention this now either. You seem to be describing 
> how the problem occurs without actually mentioning what the problem is.
> 
>>
>> Secondly, phy->attached_sas_addr will be set to a zero-address when
>> phy->linkrate < SAS_LINK_RATE_1_5_GBPS and device-type != NO_DEVICE 
>> during
>> device registration, such as stp. It will create a new port and all other
>> ex_phys whose addresses are zero will be added to the new port in
>> sas_ex_get_linkrate(), and it may trigger BUG() as follows:
> 
> I think that it would be better to first mention this crash, i.e. the 
> problem, how you recreate it, and then describe how and why it happens, 
> and then tell us how you will fix it
How about follows:

The following processes trigger a BUG(). A new port port-7:7:0 that 
created by a new zero-address sata device tries to add phy-7:7:19 had 
the same zero-address, but phy-7:7:19 is already part of another port.

[562240.051046] sas: phy19 part of wide port with phy16
[562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 
0000000000000000 (no device)
[562240.051203] sas: done REVALIDATING DOMAIN on port 0, pid:435909, res 0x0
[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 
0000000000000000 (stp)
[562240.062680]  port-7:7:0: trying to add phy phy-7:7:19 fails: it's 
already part of another port
[562240.085064] ------------[ cut here ]------------
[562240.096612] kernel BUG at drivers/scsi/scsi_transport_sas.c:1083!
[562240.109611] Internal error: Oops - BUG: 0 [#1] SMP
[562240.343518] Process kworker/u256:3 (pid: 435909, stack limit = 
0x0000000003bcbebf)
[562240.421714] Workqueue: 0000:b4:02.0_disco_q sas_revalidate_domain 
[libsas]
[562240.437173] pstate: 40c00009 (nZcv daif +PAN +UAO)
[562240.450478] pc : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.465283] lr : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.479751] sp : ffff0000300cfa70
[562240.674822] Call trace:
[562240.682709]  sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.694013]  sas_ex_get_linkrate.isra.5+0xcc/0x128 [libsas]
[562240.704957]  sas_ex_discover_end_dev+0xfc/0x538 [libsas]
[562240.715508]  sas_ex_discover_dev+0x3cc/0x4b8 [libsas]
[562240.725634]  sas_ex_discover_devices+0x9c/0x1a8 [libsas]
[562240.735855]  sas_ex_revalidate_domain+0x2f0/0x450 [libsas]
[562240.746123]  sas_revalidate_domain+0x158/0x160 [libsas]
[562240.756014]  process_one_work+0x1b4/0x448
[562240.764548]  worker_thread+0x54/0x468
[562240.772562]  kthread+0x134/0x138
[562240.779989]  ret_from_fork+0x10/0x18

We found that phy-7:7:19's port is not set when added to the parent 
port,then it hadn't be deleted from the parent port's phy_list when call
sas_unregister_devs_sas_addr(), and the link rate of the new attached 
sata device is 5 which is less then 1.5G/s, then the sata device's 
sas_address was set to a zero-address.

Fix the problem as follows:
Firstly, set ex_phy->port when ex_phy is added to the parent port. And 
set ex_dev->parent_port to NULL when the number of PHYs of the parent 
port becomes 0.

Secondly, don't set a zero-address for phy->attached_sas_addr when
phy->attached_dev_type != NO_DEVICE.

Thanks,
Xingui

> 
>>
>> [562240.051046] sas: phy19 part of wide port with phy16
>> [562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 
>> 0000000000000000 (no device)
>> [562240.051203] sas: done REVALIDATING DOMAIN on port 0, pid:435909, 
>> res 0x0
>>
>> [562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
>> [562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 
>> 0000000000000000 (stp)
>> [562240.062680]  port-7:7:0: trying to add phy phy-7:7:19 fails: it's 
>> already part of another port
>> [562240.085064] ------------[ cut here ]------------
>> [562240.096612] kernel BUG at drivers/scsi/scsi_transport_sas.c:1083!
>> [562240.109611] Internal error: Oops - BUG: 0 [#1] SMP
>> [562240.343518] Process kworker/u256:3 (pid: 435909, stack limit = 
>> 0x0000000003bcbebf)
>> [562240.421714] Workqueue: 0000:b4:02.0_disco_q sas_revalidate_domain 
>> [libsas]
>> [562240.437173] pstate: 40c00009 (nZcv daif +PAN +UAO)
>> [562240.450478] pc : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
>> [562240.465283] lr : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
>> [562240.479751] sp : ffff0000300cfa70
>> [562240.674822] Call trace:
>> [562240.682709]  sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
>> [562240.694013]  sas_ex_get_linkrate.isra.5+0xcc/0x128 [libsas]
>> [562240.704957]  sas_ex_discover_end_dev+0xfc/0x538 [libsas]
>> [562240.715508]  sas_ex_discover_dev+0x3cc/0x4b8 [libsas]
>> [562240.725634]  sas_ex_discover_devices+0x9c/0x1a8 [libsas]
>> [562240.735855]  sas_ex_revalidate_domain+0x2f0/0x450 [libsas]
>> [562240.746123]  sas_revalidate_domain+0x158/0x160 [libsas]
>> [562240.756014]  process_one_work+0x1b4/0x448
>> [562240.764548]  worker_thread+0x54/0x468
>> [562240.772562]  kthread+0x134/0x138
>> [562240.779989]  ret_from_fork+0x10/0x18
>>
>> We've done the following to solve this problem:
> 
> I'd use "Fix the problem as follows:""
> 
>> Firstly, set ex_phy->port when ex_phy is added to the parent port. And 
>> set
>> ex_dev->parent_port to NULL when the number of PHYs of the parent port
>> becomes 0.
> 
> Thanks,
> John
> 
> .