From: Ian Soboroff <ian.soboroff@nist.gov>
To: linux-kernel@vger.kernel.org
Subject: Linux 2.4.19-rc2-ac2
Date: 19 Jul 2002 16:36:38 -0400 [thread overview]
Message-ID: <9cfadonmp49.fsf@rogue.ncsl.nist.gov> (raw)
In-Reply-To: <200207161713.g6GHDhw02197@devserv.devel.redhat.com>
I have a Fujitsu P-2110 which has an ALI15X3 controller. RedHat's 7.2
kernel (2.4.9-mumble) boots OK when I specify 'ide0=ata66 ide1=ata66';
otherwise, PIO only.
Trying out 2.4.19-rc2-ac2, the machine hangs during boot when bringing
up the ALI15X3 driver, no matter what I give on the kernel command
line.
Any clues?
output of /sbin/lspci -v:
00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 02)
Subsystem: Citicorp TTI: Unknown device 110e
Flags: bus master, medium devsel, latency 64
Memory at fc100000 (32-bit, non-prefetchable) [size=1M]
00:00.1 RAM memory: Transmeta Corporation SDRAM controller
Subsystem: Citicorp TTI: Unknown device 110e
Flags: fast devsel
00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad
Subsystem: Citicorp TTI: Unknown device 110e
Flags: fast devsel
00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) (prog-if 10 [OHCI])
Subsystem: Citicorp TTI: Unknown device 10a2
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at fc004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:04.0 Multimedia audio controller: Acer Laboratories Inc. [ALi]: Unknown device 5451 (rev 01)
Subsystem: Citicorp TTI: Unknown device 112f
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at 1000 [size=256]
Memory at fc005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:06.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
Subsystem: Citicorp TTI: Unknown device 10a3
Flags: medium devsel
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: Acer Laboratories Inc. [ALi] ALI M1533 Aladdin IV ISA Bridge
Flags: bus master, medium devsel, latency 0
Capabilities: <available only to root>
00:0c.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
Subsystem: Citicorp TTI: Unknown device 10c6
Flags: bus master, medium devsel, latency 168, IRQ 9
Memory at 17100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
Memory window 0: 17400000-177ff000 (prefetchable)
Memory window 1: 17800000-17bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c3) (prog-if fa)
Subsystem: Citicorp TTI: Unknown device 10a4
Flags: bus master, medium devsel, latency 32
I/O ports at 1800 [size=16]
Capabilities: <available only to root>
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Citicorp TTI: Unknown device 111c
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at 8000 [size=256]
Memory at fc007800 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00:13.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8026 (prog-if 10 [OHCI])
Subsystem: Citicorp TTI: Unknown device 1162
Flags: medium devsel, IRQ 9
Memory at fc007000 (32-bit, non-prefetchable) [size=2K]
Memory at fc000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>
00:14.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M (rev 64) (prog-if 00 [VGA])
Subsystem: Citicorp TTI: Unknown device 114f
Flags: bus master, stepping, medium devsel, latency 66, IRQ 9
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at 1400 [size=256]
Memory at fc006000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
next prev parent reply other threads:[~2002-07-19 20:33 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-15 21:48 Linux 2.4.19-rc1-ac5 Alan Cox
2002-07-15 22:10 ` Rudmer van Dijk
2002-07-15 23:14 ` H. Peter Anvin
2002-07-15 23:25 ` Robert Love
2002-07-16 0:28 ` Alan Cox
2002-07-15 23:21 ` H. Peter Anvin
2002-07-15 23:29 ` Robert Love
2002-07-15 23:47 ` H. Peter Anvin
2002-07-16 6:46 ` Rudmer van Dijk
2002-07-16 4:01 ` Linux 2.4.19-rc1-ac5 -- Build error in mpparse.c Miles Lane
2002-07-16 4:14 ` Brandon Low
2002-07-16 7:54 ` Linux 2.4.19-rc1-ac5 -- Build error in mpparse.c (possible fix) khromy
2002-07-16 8:07 ` khromy
2002-07-16 10:09 ` Alan Cox
2002-07-16 11:45 ` Linux 2.4.19-rc1-ac5 Kasper Dupont
2002-07-16 17:07 ` Andre Hedrick
2002-07-16 17:13 ` Alan Cox
2002-07-19 20:36 ` Ian Soboroff [this message]
2002-07-19 21:02 ` Linux 2.4.19-rc2-ac2 Philippe Gramoullé
2002-07-22 13:03 ` mbs
2002-07-17 17:11 ` Linux 2.4.19-rc1-ac5 Kasper Dupont
2002-07-28 23:06 ` Kasper Dupont
2002-07-29 12:00 ` Alan Cox
2002-07-29 13:58 ` Kasper Dupont
2002-07-18 19:35 Linux 2.4.19-rc2-ac2 Alan Cox
2002-07-19 8:38 ` Adrian Bunk
2002-07-20 0:39 ` Alan Cox
2002-07-19 14:44 ` Stelian Pop
2002-07-19 19:27 ` khromy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9cfadonmp49.fsf@rogue.ncsl.nist.gov \
--to=ian.soboroff@nist.gov \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®