From: "Gregor Jasny" <gjasny@googlemail.com>
To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: libata: 30sec delay during boot with cdrom attached
Date: Thu, 1 Mar 2007 17:39:08 +0100 [thread overview]
Message-ID: <9d2cd630703010839x1cd9a8b1rd2e6575eb5a9d615@mail.gmail.com> (raw)
Hi,
after switching to libata on my old Dell notebook, I get a 30 seconds
long delay during boot. If I remove the CDROM the boot process is as
fast as with the old ide driver.
Boot with cdrom:
[ 28.103034] ata_piix 0000:00:07.1: version 2.00ac7
[ 28.103234] ata1: PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0x860 irq 14
[ 28.103841] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x868 irq 15
[ 28.104535] scsi0 : ata_piix
[ 28.263015] ata1.00: ATA-7, max UDMA/100, 78242976 sectors: LBA48
[ 28.263486] ata1.00: ata1: dev 0 multi count 8
[ 28.269671] ata1.00: configured for UDMA/33
[ 28.270001] scsi1 : ata_piix
^-- Hangs here
[ 58.594321] ata2.00: ATAPI, max UDMA/33
[ 58.754241] ata2.00: configured for UDMA/33
[ 58.754852] scsi 0:0:0:0: Direct-Access ATA SAMSUNG
MP0402H UC10 PQ: 0 ANSI: 5
[ 58.755787] SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
[ 58.756312] sda: Write Protect is off
[ 58.756595] sda: Mode Sense: 00 3a 00 00
[ 58.756657] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 58.757459] SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
[ 58.757976] sda: Write Protect is off
[ 58.758258] sda: Mode Sense: 00 3a 00 00
[ 58.758318] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 58.758984] sda: sda1 sda2 sda3 sda4
[ 59.212482] sd 0:0:0:0: Attached scsi disk sda
[ 59.213005] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 59.213930] scsi 1:0:0:0: CD-ROM SAMSUNG CD-ROM SN-124
N102 PQ: 0 ANSI: 5
[ 59.236734] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 59.252814] Uniform CD-ROM driver Revision: 3.20
[ 59.269038] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 59.269228] sr 1:0:0:0: Attached scsi generic sg1 type 5
My notebook has a PIIX4 controller:
IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
This happens with all libata enabled kernels including the latest git
snapshot (2.6.21-rc2).
Can anyone shed some light on this?
Thanks,
Gregor
PS: As far as I remember this cdrom was blacklisted for DMA or
whatever reasons in early Linux 2.6 kernels.
reply other threads:[~2007-03-01 16:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9d2cd630703010839x1cd9a8b1rd2e6575eb5a9d615@mail.gmail.com \
--to=gjasny@googlemail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®