Ho ho ho, my NFS is no go! NFS needs some symbols here and SCSI prints DV failed to configure device. Merry Christmas Linux version 2.6.10 (root@blaze) (gcc version 3.3.4) #1 Sat Dec 25 01:00:12 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f53c0 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f6df0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7640 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: auto BOOT_IMAGE=Slackware ro root=801 video=vesafb:ywrap,mtrr,vram:128 console=ttyS0,57600n8 console=tty0 rootflags=quota mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 CPU 0 irqstacks, hard=c0435000 soft=c0434000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2204.891 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1035260k/1048512k available (2252k kernel code, 12664k reserved, 804k data, 196k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4358.14 BogoMIPS (lpj=2179072) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 3200+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=0 pin2=-1 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 56k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. SCSI subsystem initialized PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. Machine check exception polling timer started. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SGI XFS with ACLs, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 7680k, total 16384k vesafb: mode is 1280x1024x24, linelength=3840, pages=3 vesafb: protected mode interface info at c000:581c vesafb: pmi: set display start = c00c58b0, set palette = c00c58fc vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4 vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2048 vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: WDC WD300BB-00AUA1, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 58631231 sectors (30019 MB) native capacity is 58633344 sectors (30020 MB) hda: Host Protected Area disabled. hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 18 (level, high) -> IRQ 18 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs (scsi0:A:3): 40.000MB/s transfers (20.000MHz, offset 15, 16bit) (scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16) scsi0:A:6:0: DV failed to configure device. Please file a bug report against this driver. Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: IBM Model: DDYS-T36950N Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:6:0: Tagged Queuing enabled. Depth 32 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 17 (level, high) -> IRQ 17 Found Controller: IT8212 UDMA/ATA133 RAID Controller FindDevices: device 0 is IDE Channel[0] BM-DMA at 0x9800-0x9807 Channel[1] BM-DMA at 0x9808-0x980F scsi1 : ITE RAIDExpress133 Vendor: ITE Model: IT8212F Rev: 1.45 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > Attached scsi disk sda at scsi0, channel 0, id 6, lun 0 SCSI device sdb: 468883200 512-byte hdwr sectors (240068 MB) sdb: asking for cache data failed sdb: assuming drive cache: write through SCSI device sdb: 468883200 512-byte hdwr sectors (240068 MB) sdb: asking for cache data failed sdb: assuming drive cache: write through sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 ACPI: (supports S0 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 3 devices found RAMDISK: Couldn't find valid RAM disk image starting at 0. XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 196k freed Adding 248968k swap on /dev/sda7. Priority:-1 extents:1 XFS mounting filesystem sda2 Ending clean XFS mount for filesystem: sda2 XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 XFS mounting filesystem sda5 Ending clean XFS mount for filesystem: sda5 XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 XFS mounting filesystem sdb1 Ending clean XFS mount for filesystem: sdb1 Intel(R) PRO/1000 Network Driver - version 5.5.4-k2-NAPI Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 16 (level, high) -> IRQ 16 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0d.0 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[e6084000-e60847ff] Max Packet=[2048] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 49646 usecs intel8x0: clocking to 47502 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:04.0 to 64 ohci1394: fw-host0: SelfID received outside of bus reset sequence eth1: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:04.0 usbcore: registered new driver usbfs usbcore: registered new driver hub ieee1394: Host added: ID:BUS[0-00:1023] GUID[8a1cc7ffff0020ed] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 22 (level, high) -> IRQ 22 ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 22, pci mem 0xe6083000 e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected eth1394: $Rev: 1224 $ Ben Collins eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, high) -> IRQ 21 ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 21, pci mem 0xe6087000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 20 (level, high) -> IRQ 20 ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 20, pci mem 0xe6082000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000 ohci_hcd 0000:00:02.1: wakeup Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected NVIDIA nForce2 chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 256M @ 0xb0000000 usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-2: new full speed USB device using ohci_hcd and address 3 hub 2-2:1.0: USB hub found hub 2-2:1.0: 3 ports detected usbcore: registered new driver hiddev input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver usb 3-1: new full speed USB device using ohci_hcd and address 2 usb 2-2.1: new low speed USB device using ohci_hcd and address 4 input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-2.1 input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-2.1 USB Universal Host Controller Interface driver v2.2 lockd: Unknown symbol svc_wake_up lockd: Unknown symbol xdr_decode_string_inplace lockd: Unknown symbol svc_recv lockd: Unknown symbol svc_exit_thread lockd: Unknown symbol xdr_encode_netobj lockd: Unknown symbol svc_process lockd: Unknown symbol xprt_set_timeout lockd: Unknown symbol nlm_debug lockd: Unknown symbol svc_destroy lockd: Unknown symbol svc_create lockd: Unknown symbol rpc_call_sync lockd: Unknown symbol rpc_delay lockd: Unknown symbol svc_makesock lockd: Unknown symbol svc_create_thread lockd: Unknown symbol rpciod_up lockd: Unknown symbol xprt_destroy lockd: Unknown symbol rpciod_down lockd: Unknown symbol xprt_create_proto lockd: Unknown symbol rpc_restart_call lockd: Unknown symbol xdr_encode_string lockd: Unknown symbol xdr_decode_netobj lockd: Unknown symbol rpc_call_async lockd: Unknown symbol rpc_destroy_client lockd: Unknown symbol rpc_create_client nfs: Unknown symbol nlmclnt_proc nfs: Unknown symbol rpc_proc_register nfs: Unknown symbol rpc_wake_up_task nfs: Unknown symbol xdr_write_pages nfs: Unknown symbol rpc_shutdown_client nfs: Unknown symbol svc_recv nfs: Unknown symbol xdr_inline_decode nfs: Unknown symbol rpc_mkpipe nfs: Unknown symbol lockd_down nfs: Unknown symbol rpc_wake_up nfs: Unknown symbol lockd_up nfs: Unknown symbol xdr_encode_opaque nfs: Unknown symbol xdr_read_pages nfs: Unknown symbol xdr_encode_opaque_fixed nfs: Unknown symbol rpc_sleep_on nfs: Unknown symbol rpc_init_task nfs: Unknown symbol xdr_encode_pages nfs: Unknown symbol rpc_setbufsize nfs: Unknown symbol rpc_clnt_sigmask nfs: Unknown symbol rpc_clone_client nfs: Unknown symbol svc_process nfs: Unknown symbol xdr_init_decode nfs: Unknown symbol rpc_proc_unregister nfs: Unknown symbol svc_destroy nfs: Unknown symbol svc_create nfs: Unknown symbol rpc_call_sync nfs: Unknown symbol rpc_queue_upcall nfs: Unknown symbol rpc_delay nfs: Unknown symbol svc_makesock nfs: Unknown symbol svc_create_thread nfs: Unknown symbol rpc_execute nfs: Unknown symbol rpc_killall_tasks nfs: Unknown symbol rpciod_up nfs: Unknown symbol xdr_reserve_space nfs: Unknown symbol xprt_destroy nfs: Unknown symbol rpc_clnt_sigunmask nfs: Unknown symbol rpcauth_lookupcred nfs: Unknown symbol rpciod_down nfs: Unknown symbol xprt_create_proto nfs: Unknown symbol rpc_restart_call nfs: Unknown symbol xdr_inline_pages nfs: Unknown symbol rpc_call_setup nfs: Unknown symbol rpc_init_wait_queue nfs: Unknown symbol put_rpccred nfs: Unknown symbol rpc_unlink nfs: Unknown symbol rpc_call_async nfs: Unknown symbol rpcauth_create nfs: Unknown symbol xdr_init_encode nfs: Unknown symbol nfs_debug nfs: Unknown symbol rpc_create_client nfs: Unknown symbol xdr_shift_buf lockd: Unknown symbol svc_wake_up lockd: Unknown symbol xdr_decode_string_inplace lockd: Unknown symbol svc_recv lockd: Unknown symbol svc_exit_thread lockd: Unknown symbol xdr_encode_netobj lockd: Unknown symbol svc_process lockd: Unknown symbol xprt_set_timeout lockd: Unknown symbol nlm_debug lockd: Unknown symbol svc_destroy lockd: Unknown symbol svc_create lockd: Unknown symbol rpc_call_sync lockd: Unknown symbol rpc_delay lockd: Unknown symbol svc_makesock lockd: Unknown symbol svc_create_thread lockd: Unknown symbol rpciod_up lockd: Unknown symbol xprt_destroy lockd: Unknown symbol rpciod_down lockd: Unknown symbol xprt_create_proto lockd: Unknown symbol rpc_restart_call lockd: Unknown symbol xdr_encode_string lockd: Unknown symbol xdr_decode_netobj lockd: Unknown symbol rpc_call_async lockd: Unknown symbol rpc_destroy_client lockd: Unknown symbol rpc_create_client nfs: Unknown symbol nlmclnt_proc nfs: Unknown symbol rpc_proc_register nfs: Unknown symbol rpc_wake_up_task nfs: Unknown symbol xdr_write_pages nfs: Unknown symbol rpc_shutdown_client nfs: Unknown symbol svc_recv nfs: Unknown symbol xdr_inline_decode nfs: Unknown symbol rpc_mkpipe nfs: Unknown symbol lockd_down nfs: Unknown symbol rpc_wake_up nfs: Unknown symbol lockd_up nfs: Unknown symbol xdr_encode_opaque nfs: Unknown symbol xdr_read_pages nfs: Unknown symbol xdr_encode_opaque_fixed nfs: Unknown symbol rpc_sleep_on nfs: Unknown symbol rpc_init_task nfs: Unknown symbol xdr_encode_pages nfs: Unknown symbol rpc_setbufsize nfs: Unknown symbol rpc_clnt_sigmask nfs: Unknown symbol rpc_clone_client nfs: Unknown symbol svc_process nfs: Unknown symbol xdr_init_decode nfs: Unknown symbol rpc_proc_unregister nfs: Unknown symbol svc_destroy nfs: Unknown symbol svc_create nfs: Unknown symbol rpc_call_sync nfs: Unknown symbol rpc_queue_upcall nfs: Unknown symbol rpc_delay nfs: Unknown symbol svc_makesock nfs: Unknown symbol svc_create_thread nfs: Unknown symbol rpc_execute nfs: Unknown symbol rpc_killall_tasks nfs: Unknown symbol rpciod_up nfs: Unknown symbol xdr_reserve_space nfs: Unknown symbol xprt_destroy nfs: Unknown symbol rpc_clnt_sigunmask nfs: Unknown symbol rpcauth_lookupcred nfs: Unknown symbol rpciod_down nfs: Unknown symbol xprt_create_proto nfs: Unknown symbol rpc_restart_call nfs: Unknown symbol xdr_inline_pages nfs: Unknown symbol rpc_call_setup nfs: Unknown symbol rpc_init_wait_queue nfs: Unknown symbol put_rpccred nfs: Unknown symbol rpc_unlink nfs: Unknown symbol rpc_call_async nfs: Unknown symbol rpcauth_create nfs: Unknown symbol xdr_init_encode nfs: Unknown symbol nfs_debug nfs: Unknown symbol rpc_create_client nfs: Unknown symbol xdr_shift_buf -- FreeBSD the Power to Serve!