From: Jayant Shekhar <jayant.shekhar@oss.qualcomm.com>
To: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Jayant Shekhar <jayant.shekhar@oss.qualcomm.com>
Cc: "Rob Clark" <robin.clark@oss.qualcomm.com>,
"Dmitry Baryshkov" <lumag@kernel.org>,
"Abhinav Kumar" <abhinav.kumar@linux.dev>,
"Jessica Zhang" <jesszhan0024@gmail.com>,
"Sean Paul" <sean@poorly.run>,
"Marijn Suijten" <marijn.suijten@somainline.org>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Jason Wang" <jasowangio@gmail.com>,
"Eugenio Pérez" <eperezma@redhat.com>,
"Xuan Zhuo" <xuanzhuo@linux.alibaba.com>,
"Sumit Semwal" <sumit.semwal@linaro.org>,
"Christian König" <christian.koenig@amd.com>,
"Philipp Stanner" <phasta@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konradybcio@kernel.org>,
"Abel Vesa" <abelvesa@kernel.org>,
"Joerg Roedel (AMD)" <joro@8bytes.org>,
"Will Deacon" <will@kernel.org>,
"Robin Murphy" <robin.murphy@arm.com>,
"Flemin Jose" <flemin.jose@oss.qualcomm.com>,
"Mahadevan P" <mahap@oss.qualcomm.com>,
virtualization@lists.linux.dev, linux-arm-msm@vger.kernel.org,
dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-media@vger.kernel.org, linaro-mm-sig@lists.linaro.org,
iommu@lists.linux.dev
Subject: Re: [PATCH v2 20/23] drm/msm/dcp: Add DCP VirtIO driver
Date: Wed, 11 Nov 2026 12:54:09 +0530 [thread overview]
Message-ID: <9e17c97d-0596-430b-87c7-63099174128d@oss.qualcomm.com> (raw)
In-Reply-To: <lruitisknk6mnkqxa7dxzib4cw3uh3ts2gypetiek4eu6muebd@rl5oyi4kfali>
On 26-10-2026 15:45, Dmitry Baryshkov wrote:
> On Mon, Oct 26, 2026 at 11:51:30AM +0530, Jayant Shekhar wrote:
>> Add the DCP function driver that binds the VirtIO device to MSM
>> DRM. Without a function driver, Linux cannot establish HFI queues,
>> discover firmware capabilities, or register the firmware-owned
>> display backend.
>>
>> Set up the DCP DMA and IOMMU identity, initialize VirtIO and HFI
>> transport, register the MSM DRM component, and synchronize suspend,
>> resume, remove, and shutdown with in-flight HFI activity.
>>
>> Assisted-by: LLM
>> Signed-off-by: Jayant Shekhar <jayant.shekhar@oss.qualcomm.com>
>> ---
>> drivers/gpu/drm/msm/Makefile | 2 +
>> drivers/gpu/drm/msm/dcp/dcp_drv.c | 191 ++++++++++++++++++++++++++
>> drivers/gpu/drm/msm/dcp/dcp_drv.h | 17 +++
>> drivers/gpu/drm/msm/dcp/dcp_virtio.c | 258 +++++++++++++++++++++++++++++++++++
>> drivers/gpu/drm/msm/dcp/dcp_virtio.h | 2 +
>> drivers/gpu/drm/msm/msm_drv.c | 6 +-
>> drivers/gpu/drm/msm/msm_drv.h | 2 +
>> 7 files changed, 475 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
>> index e1a995a8c980..ffdb159dd9ad 100644
>> --- a/drivers/gpu/drm/msm/Makefile
>> +++ b/drivers/gpu/drm/msm/Makefile
>> @@ -85,6 +85,8 @@ msm-display-$(CONFIG_DRM_MSM_DCP) += \
>> dcp/dcp_hfi_plane.o \
>> dcp/dcp_ipcc.o \
>> dcp/dcp_encoder.o \
>> + dcp/dcp_drv.o \
>> + dcp/dcp_virtio.o \
>> dcp/dcp_virtio_transport.o \
>> dcp/hfi/hfi_packer.o \
>> dcp/hfi/hfi_unpacker.o \
>> diff --git a/drivers/gpu/drm/msm/dcp/dcp_drv.c b/drivers/gpu/drm/msm/dcp/dcp_drv.c
>> new file mode 100644
>> index 000000000000..8c38de883bf6
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dcp/dcp_drv.c
>> @@ -0,0 +1,191 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + * DCP VirtIO driver.
>> + */
>> +
>> +#include <linux/component.h>
>> +#include <linux/device.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/panic_notifier.h>
>> +#include <linux/pm_runtime.h>
>> +
>> +#define DCP_DPU_AUTOSUSPEND_DELAY_MS 5000
>> +
>> +#include "dcp_drv.h"
>> +#include "dcp_dpu_kms.h"
>> +#include "dcp_hfi.h"
>> +#include "dcp_ipcc.h"
>> +#include "dcp_virtio.h"
>> +#include "msm_drv.h"
>> +#include "msm_kms.h"
>> +
>> +int dcp_subsystem_dev_init(struct dcp_drv *drv)
>> +{
>> + struct virtio_device *vdev = drv->vdev;
>> + struct device_node *dcp_subsystem_node;
>> + struct platform_device *pdev;
>> + struct device *dev;
>> + char busid[32];
>> + bool iommu_mapped;
>> + int ret;
>> +
>> + dcp_subsystem_node = of_node_get(vdev->dev.of_node);
>> + if (!dcp_subsystem_node) {
>> + dev_err(&vdev->dev, "no DCP subsystem DT node\n");
>> + return -ENODEV;
>> + }
>> +
>> + snprintf(busid, sizeof(busid), "dcp-subsystem.%s", dev_name(vdev->dev.parent));
>> +
>> + /*
>> + * DCP is discovered through VirtIO, but display/HFI buffers must be
>> + * mapped through the dcp-subsystem node's DMA/IOMMU identity. Create a
>> + * platform device for that DT node so DMA API and msm_kms_init_vm() use
> Does DMA API require platform_device or would it work with the generic
> struct device? In the latter case, should the MSM layer be changed to
> pass struct device instead of struct platform_device?
>
>> + * the display function's IOMMU domain.
>> + */
>> + pdev = of_platform_device_create(dcp_subsystem_node, busid, vdev->dev.parent);
>> + if (!pdev) {
>> + dev_err(&vdev->dev, "dcp_subsystem_dev creation failed\n");
>> + of_node_put(dcp_subsystem_node);
>> + return -ENODEV;
>> + }
>> + dev = &pdev->dev;
>> +
>> + dev->dma_parms = &drv->dcp_subsystem_dma_parms;
>> + dma_set_max_seg_size(dev, UINT_MAX);
>> +
>> + ret = of_dma_configure_id(dev, dcp_subsystem_node, true, NULL);
>> + if (ret) {
>> + dev_err(dev, "of_dma_configure_id failed: %d\n", ret);
>> + goto err_destroy;
>> + }
>> +
>> + iommu_mapped = device_iommu_mapped(dev);
>> + if (!iommu_mapped) {
>> + dev_err(dev, "no IOMMU group attached\n");
>> + ret = -ENODEV;
>> + goto err_destroy;
>> + }
>> +
>> + dev_dbg(dev, "dcp-subsystem: iommu_mapped=%d iommu_group=%d\n",
>> + iommu_mapped,
>> + dev->iommu_group ? iommu_group_id(dev->iommu_group) : -1);
>> +
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> + pm_runtime_set_autosuspend_delay(dev, DCP_DPU_AUTOSUSPEND_DELAY_MS);
>> + pm_runtime_use_autosuspend(dev);
>> +
>> + drv->dcp_subsystem_dev = pdev;
>> + drv->dcp_subsystem_node = dcp_subsystem_node;
>> +
>> + return 0;
>> +
>> +err_destroy:
>> + of_platform_device_destroy(dev, NULL);
>> + of_node_put(dcp_subsystem_node);
>> + return ret;
>> +}
>> +
>> +void dcp_subsystem_dev_deinit(struct dcp_drv *drv)
>> +{
>> + if (!drv->dcp_subsystem_dev)
>> + return;
>> +
>> + pm_runtime_disable(&drv->dcp_subsystem_dev->dev);
>> + of_platform_device_destroy(&drv->dcp_subsystem_dev->dev, NULL);
>> + of_node_put(drv->dcp_subsystem_node);
>> + drv->dcp_subsystem_dev = NULL;
>> +}
>> +
>> +int dcp_pm_prepare(struct device *vdev_dev)
>> +{
>> + struct dcp_drv *drv = vdev_dev ?
>> + dev_to_virtio(vdev_dev)->priv : NULL;
>> +
>> + if (!drv || !drv->dcp_subsystem_dev)
>> + return 0;
>> +
>> + return msm_kms_pm_prepare(&drv->dcp_subsystem_dev->dev);
>> +}
>> +
>> +void dcp_pm_complete(struct device *vdev_dev)
>> +{
>> + struct dcp_drv *drv = vdev_dev ?
>> + dev_to_virtio(vdev_dev)->priv : NULL;
>> +
>> + if (!drv || !drv->dcp_subsystem_dev)
>> + return;
>> +
>> + msm_kms_pm_complete(&drv->dcp_subsystem_dev->dev);
>> +}
>> +
>> +int dcp_component_register(struct dcp_drv *drv)
>> +{
>> + struct device *dev = &drv->dcp_subsystem_dev->dev;
>> + struct component_match *match = NULL;
>> + int ret;
>> +
>> + ret = dcp_dpu_kms_init_dsi_bridges(drv->kms, &match);
>> + if (ret) {
>> + dev_err(dev, "DSI host initialization failed: %d\n", ret);
>> + dcp_dpu_kms_cleanup_bridges(drv->kms);
>> + return ret;
>> + }
>> +
>> + /* A GPU is optional for the DCP display-only DRM device. */
>> + msm_add_gpu_components(dev, &match);
> Missign error handling.
>
>> +
>> + ret = component_master_add_with_match(dev, &msm_drm_ops, match);
>> + if (ret) {
>> + dev_err(dev, "component_master_add_with_match failed: %d\n",
>> + ret);
>> + dcp_dpu_kms_cleanup_bridges(drv->kms);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void dcp_component_unregister(struct dcp_drv *drv)
>> +{
>> + struct device *dev = &drv->dcp_subsystem_dev->dev;
>> +
>> + component_master_del(dev, &msm_drm_ops);
>> + dcp_dpu_kms_cleanup_bridges(drv->kms);
>> +}
>> +
>> +static int dcp_panic_notifier_cb(struct notifier_block *nb,
>> + unsigned long action, void *data)
>> +{
>> + struct dcp_drv *drv = container_of(nb, struct dcp_drv, panic_notifier);
>> +
>> + if (drv->hfi)
>> + atomic_set(&drv->hfi->shutdown_in_progress, 1);
>> +
>> + return NOTIFY_OK;
>> +}
>> +
>> +void dcp_panic_notifier_register(struct dcp_drv *drv)
>> +{
>> + drv->panic_notifier.notifier_call = dcp_panic_notifier_cb;
>> + atomic_notifier_chain_register(&panic_notifier_list, &drv->panic_notifier);
>> +}
>> +
>> +void dcp_panic_notifier_unregister(struct dcp_drv *drv)
>> +{
>> + atomic_notifier_chain_unregister(&panic_notifier_list, &drv->panic_notifier);
>> +}
>> +
>> +void __init msm_dcp_register(void)
>> +{
>> + dcp_virtio_register();
>> +}
>> +
>> +void __exit msm_dcp_unregister(void)
>> +{
>> + dcp_virtio_unregister();
>> +}
>> diff --git a/drivers/gpu/drm/msm/dcp/dcp_drv.h b/drivers/gpu/drm/msm/dcp/dcp_drv.h
>> index 16f87035cb9a..3adc5855a9a2 100644
>> --- a/drivers/gpu/drm/msm/dcp/dcp_drv.h
>> +++ b/drivers/gpu/drm/msm/dcp/dcp_drv.h
>> @@ -14,6 +14,7 @@
>> #include "dcp_ipcc.h"
>>
>> struct dcp_dpu_kms;
>> +struct component_match;
>>
>> struct dcp_drv {
>> struct virtio_device *vdev;
>> @@ -24,6 +25,22 @@ struct dcp_drv {
>> struct dcp_dpu_kms *kms;
>> struct dcp_caps caps;
>> struct notifier_block panic_notifier;
>> + struct dcp_ipcc *ipcc;
>> };
>>
>> +int dcp_subsystem_dev_init(struct dcp_drv *drv);
>> +void dcp_subsystem_dev_deinit(struct dcp_drv *drv);
>> +
>> +int dcp_component_register(struct dcp_drv *drv);
>> +void dcp_component_unregister(struct dcp_drv *drv);
>> +
>> +int dcp_pm_prepare(struct device *vdev_dev);
>> +void dcp_pm_complete(struct device *vdev_dev);
>> +
>> +void dcp_panic_notifier_register(struct dcp_drv *drv);
>> +void dcp_panic_notifier_unregister(struct dcp_drv *drv);
>> +
>> +void __init msm_dcp_register(void);
>> +void __exit msm_dcp_unregister(void);
>> +
>> #endif /* __DCP_DRV_H__ */
>> diff --git a/drivers/gpu/drm/msm/dcp/dcp_virtio.c b/drivers/gpu/drm/msm/dcp/dcp_virtio.c
>> new file mode 100644
>> index 000000000000..15d5caf02ff5
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dcp/dcp_virtio.c
>> @@ -0,0 +1,258 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + * DCP VirtIO device driver.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/err.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/virtio.h>
>> +#include <linux/virtio_config.h>
>> +#include <linux/slab.h>
>> +
>> +#include "dcp_drv.h"
>> +#include "dcp_dpu_kms.h"
>> +#include "dcp_hfi.h"
>> +#include "dcp_ipcc.h"
>> +#include "dcp_virtio.h"
>> +#include "msm_drv.h"
>> +#include "msm_kms.h"
>> +
>> +static void dcp_virtio_hfi_cleanup(struct dcp_drv *drv);
>> +
>> +static const unsigned int dcp_virtio_features[] = {
>> + VIRTIO_F_VERSION_1,
>> + VIRTIO_F_NOTIFICATION_DATA,
>> + VIRTIO_F_RING_RESET,
>> + VIRTIO_F_ACCESS_PLATFORM,
>> +};
>> +
>> +/*
>> + * The VirtIO core owns transport discovery. This driver owns HFI setup and
>> + * creates the DRM component only after firmware capabilities are available.
>> + */
>> +static int dcp_virtio_probe(struct virtio_device *vdev)
>> +{
>> + struct dcp_drv *drv;
>> + struct virtqueue *vqs[DCP_NUM_VQS];
>> + struct virtqueue_info vqs_info[DCP_NUM_VQS] = {
>> + [DCP_VQ_CMD] = { .name = "cmd", .callback = dcp_hfi_cmd_callback },
>> + [DCP_VQ_RESP] = { .name = "resp", .callback = dcp_hfi_resp_callback },
>> + };
>> + struct dcp_dpu_kms *dcp_kms;
>> + struct msm_drm_private *priv;
>> + int ret;
>> +
>> + dev_dbg(&vdev->dev, "DCP VirtIO probe started\n");
>> +
>> + drv = devm_kzalloc(&vdev->dev, sizeof(*drv), GFP_KERNEL);
>> + if (!drv)
>> + return -ENOMEM;
>> +
>> + drv->vdev = vdev;
>> + vdev->priv = drv;
>> +
>> + if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1)) {
>> + dev_err(&vdev->dev, "VIRTIO_F_VERSION_1 not negotiated\n");
>> + return -ENODEV;
>> + }
>> +
>> + drv->ipcc = dcp_virtio_get_ipcc(vdev);
> Here you are breaking the abstraction boundary. The DCP is a VirtIO
> device. You should not use IPCC to communicate with it.
>
Will be addressed in v3.
>> + /* Access-platform is required for the firmware-visible IOVA mappings. */
>> + if (!virtio_has_feature(vdev, VIRTIO_F_ACCESS_PLATFORM)) {
>> + dev_err(&vdev->dev, "VIRTIO_F_ACCESS_PLATFORM not negotiated\n");
>> + return -ENODEV;
>> + }
>> +
>> + ret = dcp_subsystem_dev_init(drv);
>> + if (ret)
>> + return ret;
>> +
>> + ret = virtio_find_vqs(vdev, DCP_NUM_VQS, vqs, vqs_info, NULL);
>> + if (ret) {
>> + dev_err(&vdev->dev, "virtqueue allocation failed: %d\n", ret);
>> + goto err_fn_dev;
>> + }
>> +
>> + ret = dcp_hfi_init(drv, vdev, vqs[DCP_VQ_CMD], vqs[DCP_VQ_RESP],
>> + vdev->dev.parent);
>> + if (ret) {
>> + dev_err(&vdev->dev, "HFI init failed: %d\n", ret);
>> + goto err_del_vqs;
>> + }
>> +
>> + dcp_ipcc_set_resp_vq(drv->ipcc, vqs[DCP_VQ_RESP]);
>> +
>> + /*
>> + * Keep the device unready until HFI state and virtqueues are initialized.
>> + * KMS registration below depends on synchronous firmware initialization.
>> + */
>> + virtio_device_ready(vdev);
>> + virtqueue_kick(drv->hfi->resp_vq);
>> +
>> + ret = dcp_hfi_send_device_init(drv->hfi);
>> + if (ret) {
>> + dev_err(&vdev->dev, "HFI DEVICE_INIT failed: %d\n", ret);
>> + goto err_hfi_deinit;
>> + }
>> +
>> + ret = dcp_hfi_get_capabilities(drv->hfi, &drv->caps);
>> + if (ret) {
>> + dev_err(&vdev->dev, "HFI GET_CAPS failed: %d\n", ret);
>> + goto err_hfi_deinit;
>> + }
>> +
>> + /* Register the display resources before exposing the DRM component. */
>> + ret = dcp_hfi_send_resource_register(drv->hfi);
>> + if (ret) {
>> + dev_err(&vdev->dev, "HFI RESOURCE_REGISTER failed: %d\n", ret);
>> + goto err_hfi_deinit;
>> + }
>> +
>> + dev_dbg(&vdev->dev,
>> + "DCP caps: %u displays, max %ux%u, %u planes\n",
>> + drv->caps.num_displays, drv->caps.max_width, drv->caps.max_height,
>> + drv->caps.max_planes);
>> +
>> + dcp_kms = devm_kzalloc(&drv->dcp_subsystem_dev->dev, sizeof(*dcp_kms), GFP_KERNEL);
>> + if (!dcp_kms) {
>> + ret = -ENOMEM;
>> + goto err_hfi_deinit;
>> + }
>> +
>> + dcp_kms->drv = drv;
>> + dcp_kms->pm_dev = &drv->dcp_subsystem_dev->dev;
>> + dcp_kms->hfi = drv->hfi;
>> + dcp_kms->caps = &drv->caps;
>> + dcp_kms->dpus_np = drv->dcp_subsystem_node;
>> + dcp_kms->iommu_dev = &drv->dcp_subsystem_dev->dev;
>> + drv->kms = dcp_kms;
>> +
>> + ret = msm_kms_init(&dcp_kms->base, &dcp_dpu_kms_funcs);
>> + if (ret) {
>> + dev_err(&vdev->dev, "msm_kms_init failed: %d\n", ret);
>> + goto err_hfi_deinit;
>> + }
>> +
>> + priv = devm_kzalloc(&drv->dcp_subsystem_dev->dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv) {
>> + ret = -ENOMEM;
>> + goto err_hfi_deinit;
>> + }
>> +
>> + priv->kms = &dcp_kms->base;
>> + priv->kms_init = dcp_kms_init;
>> + dev_set_drvdata(&drv->dcp_subsystem_dev->dev, priv);
>> + dcp_kms->rpm_enabled = true;
>> +
>> + /* Component binding now sees initialized HFI, capabilities, and IOMMU state. */
>> + ret = dcp_component_register(drv);
>> + if (ret) {
>> + dev_err_probe(&vdev->dev, ret, "component register failed\n");
>> + goto err_hfi_deinit;
>> + }
>> +
>> + dcp_panic_notifier_register(drv);
>> +
>> + dev_dbg(&vdev->dev, "DCP VirtIO probe complete\n");
>> + return 0;
>> +
>> +err_hfi_deinit:
>> + dcp_virtio_hfi_cleanup(drv);
>> + goto err_fn_dev;
>> +err_del_vqs:
>> + virtio_reset_device(vdev);
>> + vdev->config->del_vqs(vdev);
>> +err_fn_dev:
>> + dcp_subsystem_dev_deinit(drv);
>> + return ret;
>> +}
>> +
>> +static void dcp_virtio_hfi_cleanup(struct dcp_drv *drv)
>> +{
>> + struct virtio_device *vdev = drv->vdev;
>> +
>> + if (!drv->hfi)
>> + return;
>> +
>> + dcp_ipcc_set_resp_vq(drv->ipcc, NULL);
>> +
>> + dcp_hfi_stop(drv->hfi);
>> + virtio_reset_device(vdev);
>> + virtio_synchronize_cbs(vdev);
>> + dcp_hfi_quiesce_queues(drv->hfi);
>> + vdev->config->del_vqs(vdev);
>> + dcp_hfi_deinit(drv->hfi);
>> +}
>> +
>> +/* Remove DRM users before tearing down HFI, IPCC, or the VirtIO queues. */
>> +static void dcp_virtio_remove(struct virtio_device *vdev)
>> +{
>> + struct dcp_drv *drv = vdev->priv;
>> +
>> + dev_dbg(&vdev->dev, "DCP VirtIO remove\n");
>> +
>> + dcp_component_unregister(drv);
>> + dcp_panic_notifier_unregister(drv);
>> +
>> + dcp_virtio_hfi_cleanup(drv);
>> +
>> + dcp_subsystem_dev_deinit(drv);
>> +}
>> +
>> +/* KMS shutdown must complete while the firmware transport is available. */
>> +static void dcp_virtio_shutdown(struct virtio_device *vdev)
>> +{
>> + struct dcp_drv *drv = vdev->priv;
>> +
>> + pm_runtime_get_sync(&drv->dcp_subsystem_dev->dev);
>> + msm_kms_shutdown(drv->dcp_subsystem_dev);
>> + pm_runtime_put_noidle(&drv->dcp_subsystem_dev->dev);
>> +}
>> +
>> +static const struct virtio_device_id dcp_virtio_id_table[] = {
>> + { VIRTIO_ID_QPSFI, VIRTIO_VENDOR_ID_DCP_HFI },
> What exactly does it mean? Are you using Vendor ID (which should be
> Qualcomm) to distinguish between possible QPSFI devices?
>
>> + { 0 },
>> +};
>> +MODULE_DEVICE_TABLE(virtio, dcp_virtio_id_table);
>> +
>> +static const struct dev_pm_ops dcp_virtio_pm_ops = {
>> + .prepare = dcp_pm_prepare,
>> + .complete = dcp_pm_complete,
>> +};
>> +
>> +static struct virtio_driver dcp_virtio_driver = {
>> + .driver = {
>> + .name = "qcom-dcp-hfi",
>> + .owner = THIS_MODULE,
>> + .pm = &dcp_virtio_pm_ops,
>> + },
>> + .id_table = dcp_virtio_id_table,
>> + .feature_table = dcp_virtio_features,
>> + .feature_table_size = ARRAY_SIZE(dcp_virtio_features),
>> + .probe = dcp_virtio_probe,
>> + .remove = dcp_virtio_remove,
>> + .shutdown = dcp_virtio_shutdown,
>> +};
>> +
>> +int dcp_virtio_register(void)
>> +{
>> + int ret;
>> +
>> + ret = dcp_virtio_transport_register();
>> + if (ret)
>> + return ret;
>> +
>> + ret = register_virtio_driver(&dcp_virtio_driver);
>> + if (ret)
>> + dcp_virtio_transport_unregister();
>> +
>> + return ret;
>> +}
>> +
>> +void dcp_virtio_unregister(void)
>> +{
>> + unregister_virtio_driver(&dcp_virtio_driver);
>> + dcp_virtio_transport_unregister();
>> +}
>> diff --git a/drivers/gpu/drm/msm/dcp/dcp_virtio.h b/drivers/gpu/drm/msm/dcp/dcp_virtio.h
>> index a9c3b9aff61d..3ded8293ab18 100644
>> --- a/drivers/gpu/drm/msm/dcp/dcp_virtio.h
>> +++ b/drivers/gpu/drm/msm/dcp/dcp_virtio.h
>> @@ -8,9 +8,11 @@
>>
>> #include <linux/device.h>
>> #include <linux/virtio.h>
>> +#include <linux/virtio_ids.h>
>>
>> struct dcp_drv;
>> struct dcp_ipcc;
>> +#define VIRTIO_VENDOR_ID_DCP_HFI 1
> Squatting the ID?
>
>>
>> struct dcp_ipcc *dcp_virtio_get_ipcc(struct virtio_device *vdev);
>>
>> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
>> index 5e8f3ce26b32..5816c64d7ce7 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.c
>> +++ b/drivers/gpu/drm/msm/msm_drv.c
>> @@ -1093,8 +1093,8 @@ static const struct of_device_id msm_gpu_match[] = {
>> { },
>> };
>>
>> -static int add_gpu_components(struct device *dev,
>> - struct component_match **matchptr)
>> +int msm_add_gpu_components(struct device *dev,
>> + struct component_match **matchptr)
> Separate commit.
>
>>
Comments to be addressed in v3.
>> {
>> struct device_node *np;
>>
>> @@ -1153,7 +1153,7 @@ int msm_drv_probe(struct device *master_dev,
>> }
>>
>> if (!msm_separate_gpu_kms_components()) {
>> - ret = add_gpu_components(master_dev, &match);
>> + ret = msm_add_gpu_components(master_dev, &match);
>> if (ret)
>> return ret;
>> }
>> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
>> index 2840e8a5052d..aa5dfd82ac6f 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.h
>> +++ b/drivers/gpu/drm/msm/msm_drv.h
>> @@ -523,6 +523,8 @@ static inline unsigned long timeout_to_jiffies(const ktime_t *timeout)
>> /* Driver helpers */
>>
>> extern const struct component_master_ops msm_drm_ops;
>> +int msm_add_gpu_components(struct device *dev,
>> + struct component_match **matchptr);
>>
>> int msm_kms_pm_prepare(struct device *dev);
>> void msm_kms_pm_complete(struct device *dev);
>>
>> --
>> 2.43.0
>>
next prev parent reply other threads:[~2026-11-11 7:24 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-26 6:21 [PATCH v2 00/23] drm/msm/dcp: Add Qualcomm DCP display support Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 01/23] dt-bindings: display: msm: Add Qualcomm DCP Jayant Shekhar
2026-10-26 9:57 ` Dmitry Baryshkov
2026-11-11 7:08 ` Jayant Shekhar
2026-10-26 19:44 ` Rob Herring (Arm)
2026-11-11 7:10 ` Jayant Shekhar
2026-10-27 8:36 ` Krzysztof Kozlowski
2026-11-11 7:13 ` Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 02/23] drm/msm/dcp: Add HFI packet helpers Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 03/23] drm/msm/dcp: Add HFI device definitions Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 04/23] drm/msm/dcp: Add HFI display definitions Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 05/23] drm/msm/dcp: Add HFI panel definitions Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 06/23] drm/msm/dcp: Add HFI VirtIO transport Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 07/23] drm/msm/dcp: Handle asynchronous HFI responses Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 08/23] drm/msm/dcp: Add IPCC power notifications Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 09/23] drm/msm/dcp: Add generic HFI display commands Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 10/23] drm/msm/dcp: Add HFI DSI and panel commands Jayant Shekhar
2026-10-27 11:06 ` Dmitry Baryshkov
2026-11-11 7:16 ` Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 11/23] drm/msm/dcp: Add DCP CRTCs and shared plane state Jayant Shekhar
2026-10-26 10:49 ` Dmitry Baryshkov
2026-10-26 6:21 ` [PATCH v2 12/23] drm/msm/dcp: Add DCP planes Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 13/23] drm/msm/dcp: Route HFI display events Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 14/23] drm/msm/dcp: Add DCP encoder Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 15/23] drm/msm/dcp: Add DCP DSI host and panel support Jayant Shekhar
2026-10-26 11:08 ` Dmitry Baryshkov
2026-11-11 7:21 ` Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 16/23] drm/msm/dcp: Integrate the DSI bridge with KMS Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 17/23] drm/msm/dcp: Register DCP display pipeline Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 18/23] virtio: Add Qualcomm Platform Services Firmware Interface ID Jayant Shekhar
2026-10-26 9:59 ` Dmitry Baryshkov
2026-10-26 10:27 ` Michael S. Tsirkin
2026-10-26 6:21 ` [PATCH v2 19/23] drm/msm/dcp: Add Qualcomm VirtIO transport wrapper Jayant Shekhar
2026-10-26 10:07 ` Dmitry Baryshkov
2026-11-11 7:22 ` Jayant Shekhar
2026-10-26 6:21 ` [PATCH v2 20/23] drm/msm/dcp: Add DCP VirtIO driver Jayant Shekhar
2026-10-26 10:15 ` Dmitry Baryshkov
2026-11-11 7:24 ` Jayant Shekhar [this message]
2026-10-26 6:21 ` [PATCH v2 21/23] drm/msm: Support KMS backends without a display IRQ Jayant Shekhar
2026-10-27 11:37 ` Dmitry Baryshkov
2026-10-26 6:21 ` [PATCH v2 22/23] drm/msm: Register the DCP backend Jayant Shekhar
2026-10-27 11:38 ` Dmitry Baryshkov
2026-10-26 6:21 ` [PATCH v2 23/23] arm64: dts: qcom: hawi: Add DCP support Jayant Shekhar
2026-10-27 11:44 ` Dmitry Baryshkov
2026-10-27 11:58 ` [PATCH v2 00/23] drm/msm/dcp: Add Qualcomm DCP display support Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e17c97d-0596-430b-87c7-63099174128d@oss.qualcomm.com \
--to=jayant.shekhar@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=abhinav.kumar@linux.dev \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=christian.koenig@amd.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eperezma@redhat.com \
--cc=flemin.jose@oss.qualcomm.com \
--cc=freedreno@lists.freedesktop.org \
--cc=iommu@lists.linux.dev \
--cc=jasowangio@gmail.com \
--cc=jesszhan0024@gmail.com \
--cc=joro@8bytes.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linaro-mm-sig@lists.linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lumag@kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mahap@oss.qualcomm.com \
--cc=marijn.suijten@somainline.org \
--cc=mripard@kernel.org \
--cc=mst@redhat.com \
--cc=phasta@kernel.org \
--cc=robh@kernel.org \
--cc=robin.clark@oss.qualcomm.com \
--cc=robin.murphy@arm.com \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
--cc=sumit.semwal@linaro.org \
--cc=tzimmermann@suse.de \
--cc=virtualization@lists.linux.dev \
--cc=will@kernel.org \
--cc=xuanzhuo@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®