mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jon Smirl <jonsmirl@gmail.com>
To: Jens Axboe <axboe@suse.de>
Cc: jeffrey.t.kirsher@intel.com,
	Linux Kernel <linux-kernel@vger.kernel.org>,
	Linus Torvalds <torvalds@osdl.org>
Subject: Re: [PATCH] e1000 C style badness
Date: Wed, 18 Jan 2006 12:53:35 -0500	[thread overview]
Message-ID: <9e4733910601180953i11963df9n232cd8980c4bf7f2@mail.gmail.com> (raw)
In-Reply-To: <20060118083721.GA4222@suse.de>

On 1/18/06, Jens Axboe <axboe@suse.de> wrote:
> Hi,
>
> Seems e1000 has even bigger problems than just C style badness in the
> newest -git after the e1000 updates. diff of kernel boot messages from
> e1000:
>
> -Intel(R) PRO/1000 Network Driver - version 6.1.16-k2
> +Intel(R) PRO/1000 Network Driver - version 6.3.9-k2
>  Copyright (c) 1999-2005 Intel Corporation.
>  ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>  PCI: Setting latency timer of device 0000:02:00.0 to 64
> +e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
> 00:0c:f1:ff:92:b8
>  e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>
> It sends/receives 5 packages, but the dhcp request never succeeds. If I
> down the interface, it oopses (nvidia module is loaded, however it bombs
> in the same way without it). If I revert just the e1000 updates, my
> system work fine (typing this message from it).

e1000 is failing the same way for me too. Chip is on the motherboard:
Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)

Jan 18 10:08:26 jonsmirl kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 18 10:08:26 jonsmirl kernel: e1000: eth0: e1000_watchdog_task: NIC
Link is Up 100 Mbps Half Duplex
Jan 18 10:08:26 jonsmirl kernel: ADDRCONF(NETDEV_CHANGE): eth0: link
becomes ready
Jan 18 10:08:26 jonsmirl dhclient: DHCPREQUEST on eth0 to
255.255.255.255 port 67
Jan 18 10:08:31 jonsmirl dhclient: DHCPREQUEST on eth0 to
255.255.255.255 port 67
Jan 18 10:08:38 jonsmirl dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 8
Jan 18 10:08:46 jonsmirl dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 10
Jan 18 10:08:56 jonsmirl dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 11
Jan 18 10:09:07 jonsmirl dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 20
Jan 18 10:09:27 jonsmirl dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 9
Jan 18 10:09:36 jonsmirl dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 3
Jan 18 10:09:39 jonsmirl dhclient: No DHCPOFFERS received.

I am using an old switch so I normally get a half duplex connection:
Jan 18 10:14:25 jonsmirl kernel: e1000: eth0: e1000_watchdog_task: NIC
Link is Up 100 Mbps Half Duplex
I don't normally get the NETDEV up and changed notifications.

--
Jon Smirl
jonsmirl@gmail.com

  reply	other threads:[~2006-01-18 17:53 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-01-18  8:07 Jens Axboe
2006-01-18  8:37 ` Jens Axboe
2006-01-18 17:53   ` Jon Smirl [this message]
2006-01-18 18:13     ` Jeff Garzik
2006-01-18 18:20       ` Jens Axboe
2006-01-18 19:10         ` Jesse Brandeburg
2006-01-19  8:02           ` Jens Axboe
2006-01-21  6:52             ` Jesse Brandeburg
2006-01-21 11:42               ` Jens Axboe
     [not found] <5wgyi-18w-7@gated-at.bofh.it>
2006-01-18  8:56 ` Patrizio Bassi
2006-01-18  9:00   ` Jens Axboe
2006-01-18  9:02   ` Nick Piggin
2006-01-18 11:30     ` Patrizio Bassi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9e4733910601180953i11963df9n232cd8980c4bf7f2@mail.gmail.com \
    --to=jonsmirl@gmail.com \
    --cc=axboe@suse.de \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®