mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Jon Smirl" <jonsmirl@gmail.com>
To: "linux-os (Dick Johnson)" <linux-os@analogic.com>
Cc: "Mathieu Desnoyers" <compudj@krystal.dyndns.org>,
	linux-kernel@vger.kernel.org, ltt-dev@shafik.org
Subject: Re: Interrupts disabled for too long in printk
Date: Thu, 8 Jun 2006 11:45:52 -0400	[thread overview]
Message-ID: <9e4733910606080845y48dabed1o333b82eeb1a57381@mail.gmail.com> (raw)
In-Reply-To: <Pine.LNX.4.61.0606081107110.31343@chaos.analogic.com>

On 6/8/06, linux-os (Dick Johnson) <linux-os@analogic.com> wrote:
>
> On Thu, 8 Jun 2006, Jon Smirl wrote:
>
> > On 6/8/06, linux-os (Dick Johnson) <linux-os@analogic.com> wrote:
> >>
> >> On Wed, 7 Jun 2006, Jon Smirl wrote:
> >>
> >>> On 6/7/06, Mathieu Desnoyers <compudj@krystal.dyndns.org> wrote:
> >>>> * Jon Smirl (jonsmirl@gmail.com) wrote:
> >>>>> You can look at this problem from the other direction too. Why is it
> >>>>> taking 15ms to get between the two points? If IRQs are off how is the
> >>>>> serial driver getting interrupts to be able to display the message? It
> >>>>> is probably worthwhile to take a look and see what the serial console
> >>>>> driver is doing.
> >>>>
> >>>> Hi John,
> >>>>
> >>>> The serial port is configured at 38000 bauds. It can therefore transmit 4800
> >>>> bytes per seconds, for 72 characters in 15 ms. So the console driver would be
> >>>> simply busy sending characters to the serial port during that interrupt
> >>>> disabling period.
> >>>
> >>> Why can't the serial console driver record the message in a buffer at
> >>> the point where it is being called with interrupts off, and then let
> >>> the serial port slowly print it via interupts? It sounds to me like
> >>> the serial port is being driven in polling mode.
> >>>
> >>>>
> >>>> Mathieu
> >>>>
> >>>> OpenPGP public key:              http://krystal.dyndns.org:8080/key/compudj.gpg
> >>>> Key fingerprint:     8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68
> >>
> >> Probably because there is no buffer that is big enough! If the character
> >> source (a call to printk()) can generate N characters per second, but
> >> the UART can only send out N-1, then the buffer will fill up at which
> >> time software will wait until the UART is ready for the next character,
> >> effectively becoming poll-mode with a buffer full of characters as
> >> backlog.
> >
> > That sounds like a reasonable explanation if that is what is actually
> > happening.  Does the serial console driver revert to a polling
> > behavior when interrupts are off?
>
> The last serial I/O that I looked at while attempting to fix a problem
> with a ppp link, will normally sleep until there is room in the output
> buffer. This makes everything work smoothly when doing normal I/O
> using RS-232C. However, the serial console can't sleep when being
> fed from interrupt context, so there are likely some compromises.
>
> Right now, I have to take a work-break so I can't look at it, but
> I would suggest that it is illegal, immoral, and fattening to do
> printk() from interrupt context anyway, so you will not find anybody
> who will "fix" the problem. Printk() is already buffered, but there
> is only so much one can do when you can generate characters faster
> than you can possibly dispose of them, especially from within an
> interrupt or otherwise when the interrupts are off.

Printk from interrupt context works fine on VGAcon/fbdev because they
can quickly print (us not ms) and don't need interrupts to work. You
can't remove the feature because everyone will then complain that they
can't debug their interrupt handlers. Removing this capability was
brought up at OLS last year and it got a big no vote.

This just seems to be an issue with the serial console implementation
which is much slower.   So the answer looks to be that if the serial
console buffer is full, and it is being called with interrupts off, it
should just toss the printk. If someone really needs all the output
they would recompile the serial console with a bigger buffer. If you
get fancy the serial console could remember it tossed things and when
the buffer empties it could print out a message saying things were
lost. Alternativately you could just leave things like they are and
assume that printk's from interrupts are for debugging only and it
doesn't matter if they cause interrupts to be lost.


>
> >
> > What should the console do in this situation? If called to printk with
> > interrupts off, and the backlog buffer is full, should it suspend the
> > system like it is doing, or should it toss the printk and return an
> > error?
> >
> > --
> > Jon Smirl
> > jonsmirl@gmail.com
> >
>
> Cheers,
> Dick Johnson
> Penguin : Linux version 2.6.16.4 on an i686 machine (5592.88 BogoMips).
> New book: http://www.AbominableFirebug.com/
> _
> \x1a\x04
>
> ****************************************************************
> The information transmitted in this message is confidential and may be privileged.  Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited.  If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to DeliveryErrors@analogic.com - and destroy all copies of this information, including any attachments, without reading or disclosing them.
>
> Thank you.
>


-- 
Jon Smirl
jonsmirl@gmail.com

  reply	other threads:[~2006-06-08 15:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-03 11:19 Mathieu Desnoyers
2006-06-03 21:43 ` Steven Rostedt
2006-06-08  1:09   ` Mathieu Desnoyers
2006-06-08  1:37 ` Jon Smirl
2006-06-08  2:31   ` Mathieu Desnoyers
2006-06-08  2:35     ` Jon Smirl
2006-06-08 10:24       ` linux-os (Dick Johnson)
2006-06-08 14:38         ` Jon Smirl
2006-06-08 15:17           ` linux-os (Dick Johnson)
2006-06-08 15:45             ` Jon Smirl [this message]
2006-06-08 18:34               ` Miquel van Smoorenburg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9e4733910606080845y48dabed1o333b82eeb1a57381@mail.gmail.com \
    --to=jonsmirl@gmail.com \
    --cc=compudj@krystal.dyndns.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-os@analogic.com \
    --cc=ltt-dev@shafik.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®