Re: [PATCH 1/2] dt-bindings: pwm: convert atmel pwm to json-schema

[Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>]

On 07/03/2022 14:03, Sergiu Moga wrote:
> Convert PWM binding for Atmel/Microchip SoCs to Device Tree Schema
> format.
> 
> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
> ---
>  .../devicetree/bindings/pwm/atmel-pwm.txt     | 35 -----------
>  .../devicetree/bindings/pwm/atmel-pwm.yaml    | 62 +++++++++++++++++++
>  2 files changed, 62 insertions(+), 35 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.txt
>  create mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
> deleted file mode 100644
> index fbb5325be1f0..000000000000
> --- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt

I would prefer for new files to switch to common DT conversion:
vendor,name.yaml

You have there another PWM bindings for Atmel, so the name should not be
just "pwm" but something more specific, maybe "at91sam-pwm"?

> +++ /dev/null
> @@ -1,35 +0,0 @@
> -Atmel PWM controller
> -
> -Required properties:
> -  - compatible: should be one of:
> -    - "atmel,at91sam9rl-pwm"
> -    - "atmel,sama5d3-pwm"
> -    - "atmel,sama5d2-pwm"
> -    - "microchip,sam9x60-pwm"
> -  - reg: physical base address and length of the controller's registers
> -  - #pwm-cells: Should be 3. See pwm.yaml in this directory for a
> -    description of the cells format.
> -
> -Example:
> -
> -	pwm0: pwm@f8034000 {
> -		compatible = "atmel,at91sam9rl-pwm";
> -		reg = <0xf8034000 0x400>;
> -		#pwm-cells = <3>;
> -	};
> -
> -	pwmleds {
> -		compatible = "pwm-leds";
> -
> -		d1 {
> -			label = "d1";
> -			pwms = <&pwm0 3 5000 0>
> -			max-brightness = <255>;
> -		};
> -
> -		d2 {
> -			label = "d2";
> -			pwms = <&pwm0 1 5000 1>
> -			max-brightness = <255>;
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml
> new file mode 100644
> index 000000000000..f5378a2226bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/atmel-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel PWM controller

title: Atmel/Microchip PWM controller

> +
> +maintainers:
> +  - Claudiu Beznea <claudiu.beznea@microchip.com>
> +

allOf including pwm.yaml

> +properties:
> +  compatible:
> +    enum:
> +      - atmel,at91sam9rl-pwm
> +      - atmel,sama5d3-pwm
> +      - atmel,sama5d2-pwm
> +      - microchip,sam9x60-pwm
> +
> +  reg:
> +    description: |
> +      Physical base address and length of the controller's
> +      registers

Skip description, it's obvious.

> +    maxItems: 1
> +
> +  "#pwm-cells":
> +    description: |
> +      Should be 3. See pwm.yaml in this directory for a
> +      description of the cells format.

Skip description, it's obvious.

> +    const: 3
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#pwm-cells"

Skip pwm-cells, required by pwm.yaml.

> +
> +additionalProperties: true
> +
> +examples:
> +  - |
> +        pwm0: pwm@f8034000 {
> +                compatible = "atmel,at91sam9rl-pwm";
> +                reg = <0xf8034000 0x400>;
> +                #pwm-cells = <3>;
> +        };
> +
> +        pwmleds {

Skip this node. No actual benefit. All clients are the same.

> +                compatible = "pwm-leds";
> +
> +                led-1 {
> +                        label = "led-1";
> +                        pwms = <&pwm0 3 5000 0>;
> +                        max-brightness = <255>;
> +                };
> +
> +                led-2 {
> +                        label = "led-2";
> +                        pwms = <&pwm0 1 5000 1>;
> +                        max-brightness = <255>;
> +                };
> +        };


Best regards,
Krzysztof