Re: [PATCH v2 3/4] arm64: dts: qcom: sm8450: drop incorrect cells from serial

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 23.01.2023 13:56, Krzysztof Kozlowski wrote:
> The serial/UART device node does not have children with unit addresses,
> so adderss/size cells are not correct.
> 
> Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
> Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> 
> Changes since v1:
> 1. None
> ---
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index d66dcd8fe61f..395a3a156e24 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -1017,8 +1017,6 @@ uart20: serial@894000 {
>  				pinctrl-names = "default";
>  				pinctrl-0 = <&qup_uart20_default>;
>  				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
> -				#address-cells = <1>;
> -				#size-cells = <0>;
>  				status = "disabled";
>  			};
>  
> @@ -1411,8 +1409,6 @@ uart7: serial@99c000 {
>  				pinctrl-names = "default";
>  				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>  				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> -				#address-cells = <1>;
> -				#size-cells = <0>;
>  				status = "disabled";
>  			};
>  		};