From: Yongbang Shi <shiyongbang@huawei.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: <xinliang.liu@linaro.org>, <tiantao6@hisilicon.com>,
<maarten.lankhorst@linux.intel.com>, <mripard@kernel.org>,
<tzimmermann@suse.de>, <airlied@gmail.com>, <daniel@ffwll.ch>,
<kong.kongxinwei@hisilicon.com>, <liangjian010@huawei.com>,
<chenjianmin@huawei.com>, <lidongming5@huawei.com>,
<libaihan@huawei.com>, <shenjian15@huawei.com>,
<shaojijie@huawei.com>, <dri-devel@lists.freedesktop.org>,
<linux-kernel@vger.kernel.org>, <shiyongbang@huawei.com>
Subject: Re: [PATCH drm-dp 4/4] drm/hisilicon/hibmc: add dp module in hibmc
Date: Wed, 23 Oct 2024 09:12:17 +0800 [thread overview]
Message-ID: <9e7b2f9b-3a34-4d94-90e0-aa4796f95383@huawei.com> (raw)
In-Reply-To: <CAA8EJpq5MED1gScw=L-7fvO1MPOFgc+P_0K+GimtXdMTJu67RQ@mail.gmail.com>
> On Tue, 22 Oct 2024 at 15:24, Yongbang Shi <shiyongbang@huawei.com> wrote:
>>
>>> On Mon, Sep 30, 2024 at 06:06:10PM +0800, shiyongbang wrote:
>>>> From: baihan li <libaihan@huawei.com>
>>>>
>>>> To support DP interface displaying in hibmc driver. Add
>>>> a encoder and connector for DP modual.
>>>>
>>>> Signed-off-by: baihan li <libaihan@huawei.com>
>>>> ---
>>>> drivers/gpu/drm/hisilicon/hibmc/Makefile | 2 +-
>>>> .../gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c | 195 ++++++++++++++++++
>>>> .../gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 17 +-
>>>> .../gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h | 5 +
>>>> 4 files changed, 217 insertions(+), 2 deletions(-)
>>>> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
>>>>
>>>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
>>>> index 693036dfab52..8cf74e0d4785 100644
>>>> --- a/drivers/gpu/drm/hisilicon/hibmc/Makefile
>>>> +++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
>>>> @@ -1,5 +1,5 @@
>>>> # SPDX-License-Identifier: GPL-2.0-only
>>>> hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_drm_i2c.o \
>>>> - dp/dp_aux.o dp/dp_link.o dp/dp_kapi.o
>>>> + dp/dp_aux.o dp/dp_link.o dp/dp_kapi.o hibmc_drm_dp.o
>>>>
>>>> obj-$(CONFIG_DRM_HISI_HIBMC) += hibmc-drm.o
>>>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
>>>> new file mode 100644
>>>> index 000000000000..7a50f1d81aac
>>>> --- /dev/null
>>>> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
>>>> @@ -0,0 +1,195 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>> +
>>>> +#include <linux/io.h>
>>>> +
>>>> +#include <drm/drm_probe_helper.h>
>>>> +#include <drm/drm_simple_kms_helper.h>
>>>> +#include <drm/drm_atomic_helper.h>
>>>> +#include <drm/drm_drv.h>
>>>> +#include <drm/drm_edid.h>
>>>> +
>>>> +#include "hibmc_drm_drv.h"
>>>> +#include "dp/dp_kapi.h"
>>>> +
>>>> +static int hibmc_dp_connector_get_modes(struct drm_connector *connector)
>>>> +{
>>>> + int count;
>>>> +
>>>> + count = drm_add_modes_noedid(connector, connector->dev->mode_config.max_width,
>>>> + connector->dev->mode_config.max_height);
>>>> + drm_set_preferred_mode(connector, 800, 600); /* default 800x600 */
>>> What? Please parse EDID instead.
>>>
>>>> +
>>>> + return count;
>>>> +}
>>>> +
>>>> +static const struct drm_connector_helper_funcs hibmc_dp_conn_helper_funcs = {
>>>> + .get_modes = hibmc_dp_connector_get_modes,
>>>> +};
>>>> +
>>>> +static const struct drm_connector_funcs hibmc_dp_conn_funcs = {
>>>> + .reset = drm_atomic_helper_connector_reset,
>>>> + .fill_modes = drm_helper_probe_single_connector_modes,
>>>> + .destroy = drm_connector_cleanup,
>>>> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>>>> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>>>> +};
>>>> +
>>>> +static void dp_mode_cfg(struct drm_device *dev, struct dp_mode *dp_mode,
>>>> + struct drm_display_mode *mode)
>>>> +{
>>>> + dp_mode->field_rate = drm_mode_vrefresh(mode);
>>>> + dp_mode->pixel_clock = mode->clock / 1000; /* 1000: khz to hz */
>>>> +
>>>> + dp_mode->h_total = mode->htotal;
>>>> + dp_mode->h_active = mode->hdisplay;
>>>> + dp_mode->h_blank = mode->htotal - mode->hdisplay;
>>>> + dp_mode->h_front = mode->hsync_start - mode->hdisplay;
>>>> + dp_mode->h_sync = mode->hsync_end - mode->hsync_start;
>>>> + dp_mode->h_back = mode->htotal - mode->hsync_end;
>>>> +
>>>> + dp_mode->v_total = mode->vtotal;
>>>> + dp_mode->v_active = mode->vdisplay;
>>>> + dp_mode->v_blank = mode->vtotal - mode->vdisplay;
>>>> + dp_mode->v_front = mode->vsync_start - mode->vdisplay;
>>>> + dp_mode->v_sync = mode->vsync_end - mode->vsync_start;
>>>> + dp_mode->v_back = mode->vtotal - mode->vsync_end;
>>> No need to copy the bits around. Please use drm_display_mode directly.
>>>
>>>> +
>>>> + if (mode->flags & DRM_MODE_FLAG_PHSYNC) {
>>>> + drm_info(dev, "horizontal sync polarity: positive\n");
>>>> + dp_mode->h_pol = 1;
>>>> + } else if (mode->flags & DRM_MODE_FLAG_NHSYNC) {
>>>> + drm_info(dev, "horizontal sync polarity: negative\n");
>>>> + dp_mode->h_pol = 0;
>>>> + } else {
>>>> + drm_err(dev, "horizontal sync polarity: unknown or not set\n");
>>>> + }
>>>> +
>>>> + if (mode->flags & DRM_MODE_FLAG_PVSYNC) {
>>>> + drm_info(dev, "vertical sync polarity: positive\n");
>>>> + dp_mode->v_pol = 1;
>>>> + } else if (mode->flags & DRM_MODE_FLAG_NVSYNC) {
>>>> + drm_info(dev, "vertical sync polarity: negative\n");
>>> No spamming, use DRM debugging macros.
>>>
>>>> + dp_mode->v_pol = 0;
>>>> + } else {
>>>> + drm_err(dev, "vertical sync polarity: unknown or not set\n");
>>>> + }
>>>> +}
>>>> +
>>>> +static int dp_prepare(struct hibmc_dp *dp, struct drm_display_mode *mode)
>>>> +{
>>>> + struct dp_mode dp_mode = {0};
>>>> + int ret;
>>>> +
>>>> + hibmc_dp_display_en(dp, false);
>>>> +
>>>> + dp_mode_cfg(dp->drm_dev, &dp_mode, mode);
>>>> + ret = hibmc_dp_mode_set(dp, &dp_mode);
>>>> + if (ret)
>>>> + drm_err(dp->drm_dev, "hibmc dp mode set failed: %d\n", ret);
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static void dp_enable(struct hibmc_dp *dp)
>>>> +{
>>>> + hibmc_dp_display_en(dp, true);
>>>> +}
>>>> +
>>>> +static void dp_disable(struct hibmc_dp *dp)
>>>> +{
>>>> + hibmc_dp_display_en(dp, false);
>>>> +}
>>>> +
>>>> +static int hibmc_dp_hw_init(struct hibmc_drm_private *priv)
>>>> +{
>>>> + int ret;
>>>> +
>>>> + ret = hibmc_dp_kapi_init(&priv->dp);
>>>> + if (ret)
>>>> + return ret;
>>>> +
>>>> + hibmc_dp_display_en(&priv->dp, false);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void hibmc_dp_hw_uninit(struct hibmc_drm_private *priv)
>>>> +{
>>>> + hibmc_dp_kapi_uninit(&priv->dp);
>>>> +}
>>> Inline all these one-line wrappers, they serve no purpose.
>> Hi Dmitry,
>>
>> Yes, it make sense to be inline. But it is generally better to let the compiler decide when to inline a function.
> Please excuse me for not being explicit or clear enough. Drop the
> one-line wrappers and just call the necessary functions directly.
> There is no need to have such wrappers.
Thanks for your clear explanation, I'll change them in the next version!
>> Thanks,
>> Baihan
>>
>>
>>>> +
>>>> +static void hibmc_dp_encoder_enable(struct drm_encoder *drm_encoder,
>>>> + struct drm_atomic_state *state)
>>>> +{
>>>> + struct hibmc_dp *dp = container_of(drm_encoder, struct hibmc_dp, encoder);
>>>> + struct drm_display_mode *mode = &drm_encoder->crtc->state->mode;
>>>> +
>>>> + if (dp_prepare(dp, mode))
>>>> + return;
>>>> +
>>>> + dp_enable(dp);
>>>> +}
>>>> +
>>>> +static void hibmc_dp_encoder_disable(struct drm_encoder *drm_encoder,
>>>> + struct drm_atomic_state *state)
>>>> +{
>>>> + struct hibmc_dp *dp = container_of(drm_encoder, struct hibmc_dp, encoder);
>>>> +
>>>> + dp_disable(dp);
>>>> +}
>>>> +
>>>> +static const struct drm_encoder_helper_funcs hibmc_dp_encoder_helper_funcs = {
>>>> + .atomic_enable = hibmc_dp_encoder_enable,
>>>> + .atomic_disable = hibmc_dp_encoder_disable,
>>>> +};
>>>> +
>>>> +void hibmc_dp_uninit(struct hibmc_drm_private *priv)
>>>> +{
>>>> + hibmc_dp_hw_uninit(priv);
>>>> +}
>>>> +
>>>> +int hibmc_dp_init(struct hibmc_drm_private *priv)
>>>> +{
>>>> + struct drm_device *dev = &priv->dev;
>>>> + struct drm_crtc *crtc = &priv->crtc;
>>>> + struct hibmc_dp *dp = &priv->dp;
>>>> + struct drm_connector *connector = &dp->connector;
>>>> + struct drm_encoder *encoder = &dp->encoder;
>>>> + int ret;
>>>> +
>>>> + dp->mmio = priv->mmio;
>>>> + dp->drm_dev = dev;
>>>> +
>>>> + ret = hibmc_dp_hw_init(priv);
>>>> + if (ret) {
>>>> + drm_err(dev, "dp hw init failed: %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + encoder->possible_crtcs = drm_crtc_mask(crtc);
>>>> + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS);
>>> I think drm_simple_foo interfaces are being deprecated. Please copy
>>> required code into the driver instead.
>>>
>>>> + if (ret) {
>>>> + drm_err(dev, "init dp encoder failed: %d\n", ret);
>>>> + goto err_init;
>>>> + }
>>>> +
>>>> + drm_encoder_helper_add(encoder, &hibmc_dp_encoder_helper_funcs);
>>>> +
>>>> + ret = drm_connector_init(dev, connector, &hibmc_dp_conn_funcs,
>>>> + DRM_MODE_CONNECTOR_DisplayPort);
>>>> + if (ret) {
>>>> + drm_err(dev, "init dp connector failed: %d\n", ret);
>>>> + goto err_init;
>>>> + }
>>>> +
>>>> + drm_connector_helper_add(connector, &hibmc_dp_conn_helper_funcs);
>>>> +
>>>> + drm_connector_attach_encoder(connector, encoder);
>>>> +
>>>> + return 0;
>>>> +
>>>> +err_init:
>>>> + hibmc_dp_hw_uninit(priv);
>>>> +
>>>> + return ret;
>>>> +}
>>>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
>>>> index 9f9b19ea0587..c90a8db021b0 100644
>>>> --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
>>>> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
>>>> @@ -93,6 +93,10 @@ static const struct drm_mode_config_funcs hibmc_mode_funcs = {
>>>>
>>>> static int hibmc_kms_init(struct hibmc_drm_private *priv)
>>>> {
>>>> +#define DP_HOST_SERDES_CTRL 0x1f001c
>>>> +#define DP_HOST_SERDES_CTRL_VAL 0x8A00
>>>> +#define DP_HOST_SERDES_CTRL_MASK 0x7FFFE
>>>> +
>>> #defines outside of the function body.
>>>
>>>> struct drm_device *dev = &priv->dev;
>>>> int ret;
>>>>
>>>> @@ -116,10 +120,17 @@ static int hibmc_kms_init(struct hibmc_drm_private *priv)
>>>> return ret;
>>>> }
>>>>
>>>> + /* if DP existed, init DP */
>>>> + if ((readl(priv->mmio + DP_HOST_SERDES_CTRL) &
>>>> + DP_HOST_SERDES_CTRL_MASK) == DP_HOST_SERDES_CTRL_VAL) {
>>>> + ret = hibmc_dp_init(priv);
>>>> + if (ret)
>>>> + drm_err(dev, "failed to init dp: %d\n", ret);
>>>> + }
>>>> +
>>>> ret = hibmc_vdac_init(priv);
>>>> if (ret) {
>>>> drm_err(dev, "failed to init vdac: %d\n", ret);
>>>> - return ret;
>>> Why?
>>>
>>>> }
>>>>
>>>> return 0;
>>>> @@ -239,6 +250,7 @@ static int hibmc_hw_init(struct hibmc_drm_private *priv)
>>>>
>>>> static int hibmc_unload(struct drm_device *dev)
>>>> {
>>>> + struct hibmc_drm_private *priv = to_hibmc_drm_private(dev);
>>>> struct pci_dev *pdev = to_pci_dev(dev->dev);
>>>>
>>>> drm_atomic_helper_shutdown(dev);
>>>> @@ -247,6 +259,9 @@ static int hibmc_unload(struct drm_device *dev)
>>>>
>>>> pci_disable_msi(to_pci_dev(dev->dev));
>>>>
>>>> + if (priv->dp.encoder.possible_crtcs)
>>>> + hibmc_dp_uninit(priv);
>>>> +
>>>> return 0;
>>>> }
>>>>
>>>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
>>>> index 6b566f3aeecb..aa79903fe022 100644
>>>> --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
>>>> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
>>>> @@ -19,6 +19,7 @@
>>>> #include <linux/i2c.h>
>>>>
>>>> #include <drm/drm_framebuffer.h>
>>>> +#include "dp/dp_kapi.h"
>>>>
>>>> struct hibmc_connector {
>>>> struct drm_connector base;
>>>> @@ -37,6 +38,7 @@ struct hibmc_drm_private {
>>>> struct drm_crtc crtc;
>>>> struct drm_encoder encoder;
>>>> struct hibmc_connector connector;
>>> It seems this needs to be refactored too, to separate VGA connector /
>>> encoder / CRTC to a child struct.
>>>
>>>> + struct hibmc_dp dp;
>>>> };
>>>>
>>>> static inline struct hibmc_connector *to_hibmc_connector(struct drm_connector *connector)
>>>> @@ -59,4 +61,7 @@ int hibmc_vdac_init(struct hibmc_drm_private *priv);
>>>>
>>>> int hibmc_ddc_create(struct drm_device *drm_dev, struct hibmc_connector *connector);
>>>>
>>>> +int hibmc_dp_init(struct hibmc_drm_private *priv);
>>>> +void hibmc_dp_uninit(struct hibmc_drm_private *priv);
>>>> +
>>>> #endif
>>>> --
>>>> 2.33.0
>>>>
>
>
prev parent reply other threads:[~2024-10-23 1:12 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-30 10:06 [PATCH drm-dp 0/4] Add dp module in hibmc driver shiyongbang
2024-09-30 10:06 ` [PATCH drm-dp 1/4] drm/hisilicon/hibmc: add dp aux in hibmc drivers shiyongbang
2024-10-09 1:37 ` Andy Yan
2024-10-09 8:13 ` [PATCH " Jani Nikula
2024-09-30 10:06 ` [PATCH drm-dp 2/4] drm/hisilicon/hibmc: add dp link moduel " shiyongbang
2024-10-03 10:11 ` kernel test robot
2024-10-09 8:20 ` Jani Nikula
2024-09-30 10:06 ` [PATCH drm-dp 3/4] drm/hisilicon/hibmc: add dp kapi " shiyongbang
2024-10-03 19:19 ` kernel test robot
2024-10-19 13:59 ` Dmitry Baryshkov
2024-10-21 11:57 ` s00452708
2024-10-21 12:22 ` Yongbang Shi
2024-10-21 19:11 ` Dmitry Baryshkov
2024-10-22 12:25 ` Yongbang Shi
2024-09-30 10:06 ` [PATCH drm-dp 4/4] drm/hisilicon/hibmc: add dp module in hibmc shiyongbang
2024-10-19 14:06 ` Dmitry Baryshkov
2024-10-21 11:54 ` s00452708
2024-10-21 19:03 ` Dmitry Baryshkov
2024-10-22 12:21 ` Yongbang Shi
2024-10-21 12:29 ` Yongbang Shi
2024-10-22 12:24 ` Yongbang Shi
2024-10-22 13:49 ` Dmitry Baryshkov
2024-10-23 1:12 ` Yongbang Shi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e7b2f9b-3a34-4d94-90e0-aa4796f95383@huawei.com \
--to=shiyongbang@huawei.com \
--cc=airlied@gmail.com \
--cc=chenjianmin@huawei.com \
--cc=daniel@ffwll.ch \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kong.kongxinwei@hisilicon.com \
--cc=liangjian010@huawei.com \
--cc=libaihan@huawei.com \
--cc=lidongming5@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=shaojijie@huawei.com \
--cc=shenjian15@huawei.com \
--cc=tiantao6@hisilicon.com \
--cc=tzimmermann@suse.de \
--cc=xinliang.liu@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®