Re: INITIO scsi driver fails to work properly

["Filippos Papadopoulos" <psybases@gmail.com>]

First of all let me wish a happy new year.
I come back from the vacations and i compiled the initio driver with

#define DEBUG_INTERRUPT 1
#define DEBUG_QUEUE     1
#define DEBUG_STATE     1
#define INT_DISC        1

I used the sources from 2.6.24-rc6-git9 kernel. At kernel boot time the initio
driver prints the following:

" scsi: Initio INI-9X00U/UW SCSI device driver
Find scb at c0c00000
Append pend scb c0c00000;"

After 3 seconds the whole system freezes there and i have to reboot.



P.S  here is the info from 'lspci -vv' running 2.6.16.13 kernel:

"00:08.0 SCSI storage controller: Initio Corporation 360P (rev 02)
        Subsystem: Unknown device 9292:0202
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at d000 [size=256]
        Region 1: Memory at ef000000 (32-bit, non-prefetchable) [size=4K]
        [virtual] Expansion ROM at 50000000 [disabled] [size=128K]
"