mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: Oleksandr Andrushchenko <andr2000@gmail.com>,
	xen-devel@lists.xenproject.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-media@vger.kernel.org,
	jgross@suse.com, konrad.wilk@oracle.com
Cc: daniel.vetter@intel.com, dongwon.kim@intel.com,
	matthew.d.roper@intel.com,
	Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Subject: Re: [PATCH 4/8] xen/gntdev: Allow mappings for DMA buffers
Date: Tue, 29 May 2018 17:52:14 -0400	[thread overview]
Message-ID: <9f2999a8-7786-5811-bdf0-ff7f30301cf2@oracle.com> (raw)
In-Reply-To: <20180525153331.31188-5-andr2000@gmail.com>

On 05/25/2018 11:33 AM, Oleksandr Andrushchenko wrote:
>  
>  struct unmap_notify {
> @@ -96,10 +104,28 @@ struct grant_map {
>  	struct gnttab_unmap_grant_ref *kunmap_ops;
>  	struct page **pages;
>  	unsigned long pages_vm_start;
> +
> +#ifdef CONFIG_XEN_GRANT_DMA_ALLOC
> +	/*
> +	 * If dmabuf_vaddr is not NULL then this mapping is backed by DMA
> +	 * capable memory.
> +	 */
> +
> +	/* Device for which DMA memory is allocated. */
> +	struct device *dma_dev;
> +	/* Flags used to create this DMA buffer: GNTDEV_DMABUF_FLAG_XXX. */
> +	bool dma_flags;

Again, I think most of the comments here can be dropped. Except possibly
for the flags.

> +	/* Virtual/CPU address of the DMA buffer. */
> +	void *dma_vaddr;
> +	/* Bus address of the DMA buffer. */
> +	dma_addr_t dma_bus_addr;
> +#endif
>  };
>  
>  static int unmap_grant_pages(struct grant_map *map, int offset, int pages);
>  
> +static struct miscdevice gntdev_miscdev;
> +
>  /* ------------------------------------------------------------------ */
>  
>  static void gntdev_print_maps(struct gntdev_priv *priv,
> @@ -121,8 +147,26 @@ static void gntdev_free_map(struct grant_map *map)
>  	if (map == NULL)
>  		return;
>  
> +#ifdef CONFIG_XEN_GRANT_DMA_ALLOC
> +	if (map->dma_vaddr) {
> +		struct gnttab_dma_alloc_args args;
> +
> +		args.dev = map->dma_dev;
> +		args.coherent = map->dma_flags & GNTDEV_DMA_FLAG_COHERENT;
> +		args.nr_pages = map->count;
> +		args.pages = map->pages;
> +		args.vaddr = map->dma_vaddr;
> +		args.dev_bus_addr = map->dma_bus_addr;
> +
> +		gnttab_dma_free_pages(&args);
> +	} else if (map->pages) {
> +		gnttab_free_pages(map->count, map->pages);
> +	}
> +#else
>  	if (map->pages)
>  		gnttab_free_pages(map->count, map->pages);
> +#endif
> +

} else
#endif
    if (map->pages)
        gnttab_free_pages(map->count, map->pages);


(and elsewhere)

>  	kfree(map->pages);
>  	kfree(map->grants);
>  	kfree(map->map_ops);



>  
> diff --git a/include/uapi/xen/gntdev.h b/include/uapi/xen/gntdev.h
> index 6d1163456c03..2d5a4672f07c 100644
> --- a/include/uapi/xen/gntdev.h
> +++ b/include/uapi/xen/gntdev.h
> @@ -200,4 +200,19 @@ struct ioctl_gntdev_grant_copy {
>  /* Send an interrupt on the indicated event channel */
>  #define UNMAP_NOTIFY_SEND_EVENT 0x2
>  
> +/*
> + * Flags to be used while requesting memory mapping's backing storage
> + * to be allocated with DMA API.
> + */
> +
> +/*
> + * The buffer is backed with memory allocated with dma_alloc_wc.
> + */
> +#define GNTDEV_DMA_FLAG_WC		(1 << 1)


Is there a reason you are not using bit 0?

-boris

> +
> +/*
> + * The buffer is backed with memory allocated with dma_alloc_coherent.
> + */
> +#define GNTDEV_DMA_FLAG_COHERENT	(1 << 2)
> +
>  #endif /* __LINUX_PUBLIC_GNTDEV_H__ */

  reply	other threads:[~2018-05-29 21:49 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-25 15:33 [PATCH 0/8] xen: dma-buf support for grant device Oleksandr Andrushchenko
2018-05-25 15:33 ` [PATCH 1/8] xen/grant-table: Make set/clear page private code shared Oleksandr Andrushchenko
2018-05-29 17:39   ` Boris Ostrovsky
2018-05-30  4:24   ` Juergen Gross
2018-05-30  5:27     ` Oleksandr Andrushchenko
2018-05-30 21:34   ` Dongwon Kim
2018-05-31  5:37     ` Oleksandr Andrushchenko
2018-05-25 15:33 ` [PATCH 2/8] xen/balloon: Move common memory reservation routines to a module Oleksandr Andrushchenko
2018-05-29 18:04   ` Boris Ostrovsky
2018-05-29 18:22     ` Oleksandr Andrushchenko
2018-05-29 20:03       ` Boris Ostrovsky
2018-05-30  8:29         ` Oleksandr Andrushchenko
2018-05-30 15:54           ` Boris Ostrovsky
2018-05-30 17:46             ` Oleksandr Andrushchenko
2018-05-30 19:24               ` Boris Ostrovsky
2018-05-31  7:51                 ` Oleksandr Andrushchenko
2018-05-31 14:29                   ` Oleksandr Andrushchenko
2018-05-29 18:24   ` Boris Ostrovsky
2018-05-29 18:23     ` Oleksandr Andrushchenko
2018-05-30  4:32   ` Juergen Gross
2018-05-30  5:30     ` Oleksandr Andrushchenko
2018-05-25 15:33 ` [PATCH 3/8] xen/grant-table: Allow allocating buffers suitable for DMA Oleksandr Andrushchenko
2018-05-29 19:10   ` Boris Ostrovsky
2018-05-30  6:34     ` Oleksandr Andrushchenko
2018-05-30 15:20       ` Boris Ostrovsky
2018-05-30 17:49         ` Oleksandr Andrushchenko
2018-05-30 19:25           ` Boris Ostrovsky
2018-05-25 15:33 ` [PATCH 4/8] xen/gntdev: Allow mappings for DMA buffers Oleksandr Andrushchenko
2018-05-29 21:52   ` Boris Ostrovsky [this message]
2018-05-30  6:47     ` Oleksandr Andrushchenko
2018-05-25 15:33 ` [PATCH 5/8] xen/gntdev: Add initial support for dma-buf UAPI Oleksandr Andrushchenko
2018-05-29 22:34   ` Boris Ostrovsky
2018-05-30  6:52     ` Oleksandr Andrushchenko
2018-05-30  6:52   ` Oleksandr Andrushchenko
2018-05-25 15:33 ` [PATCH 6/8] xen/gntdev: Implement dma-buf export functionality Oleksandr Andrushchenko
2018-05-30 23:10   ` Dongwon Kim
2018-05-31  5:55     ` Oleksandr Andrushchenko
2018-05-31 14:32       ` Oleksandr Andrushchenko
2018-05-25 15:33 ` [PATCH 7/8] xen/gntdev: Implement dma-buf import functionality Oleksandr Andrushchenko
2018-05-25 15:33 ` [PATCH 8/8] xen/gntdev: Expose gntdev's dma-buf API for in-kernel use Oleksandr Andrushchenko
2018-05-30  8:32   ` Oleksandr Andrushchenko
2018-05-31  1:46 ` [PATCH 0/8] xen: dma-buf support for grant device Boris Ostrovsky
2018-05-31  5:51   ` Oleksandr Andrushchenko
2018-05-31 14:41     ` Oleksandr Andrushchenko
2018-05-31 20:25       ` Boris Ostrovsky
2018-06-01  5:42         ` Oleksandr Andrushchenko
2018-05-31 19:36     ` Boris Ostrovsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9f2999a8-7786-5811-bdf0-ff7f30301cf2@oracle.com \
    --to=boris.ostrovsky@oracle.com \
    --cc=andr2000@gmail.com \
    --cc=daniel.vetter@intel.com \
    --cc=dongwon.kim@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jgross@suse.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=matthew.d.roper@intel.com \
    --cc=oleksandr_andrushchenko@epam.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®