mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: peterasplund@gentoo.se
To: <Peter.Huewe@infineon.com>
Cc: <aaron.lu@intel.com>, <mail@srajiv.net>,
	<tpmdd-devel@lists.sourceforge.net>,
	<linux-kernel@vger.kernel.org>, <key@linux.vnet.ibm.com>
Subject: RE: [tpmdd-devel] tpm_tis driver failed to suspend, error -62
Date: Mon, 01 Apr 2013 23:01:19 +0200	[thread overview]
Message-ID: <9f68a46fb9ec6012668db36b7f7eff03@gentoo.se> (raw)
In-Reply-To: <74A44E99E3274B4CB570415926B37D4414B14E@MUCSE501.eu.infineon.com>

2013-03-28 14:12 skrev Peter.Huewe@infineon.com:
> Hi Aaron, Rajob, PeterA and everybody else
>
> @PeterA:
> Can you perhaps try find out the exact tpm version?
> 1) Install trousers and tpm_tools (emerge app-crypt/trousers
> app-crypt/tpm-tools)
> 2) Kill the tcsd and run it in the foreground
> # pkill -9 tcsd
> # tcsd -f
> (if it says up and running you can send it to background)

root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087

> 3) Run
> #tpm_version and post the output.
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17), 
Communication failure

I will try to restart the laptop, as well as check the bios settings, 
and get back to you on this one.

>
>
> Also the flags etc would perhaps be handy, they can be retrieved via
> sysfs - on you machine it _should_ be
> # cat /sys/devices/pnp0/00:0a/*
> and also post the output.
root@zepto:/home/peter# ls /sys/devices/pnp0/00\:0a/
driver/        id             power/         subsystem/
firmware_node/ options        resources      uevent
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/options
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/resources
state = active
irq 12
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/id
SYN1902
SYN1900
SYN0002
PNP0f13
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/uevent
DRIVER=i8042 aux

Cheers,
Peter A

>
>
> What also might be worth a look - in your bugzilla it states:
> [ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 
> (active)
> [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
> [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
> [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to 
> read a pcr
> value
> [ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
>
>
> Can you perhaps try to enable your TPM in the BIOS? It's quite often
> hidden under "embedded security device" or "system security".
> Quite often you have to have a bios password set to access these 
> settings.
> If your system does not have bios support for TPMs, please tell me so
> and I'll try to help you out.
>
> Thanks,
> PeterH

  parent reply	other threads:[~2013-04-01 21:01 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-19  2:34 Aaron Lu
2013-03-19 15:50 ` [tpmdd-devel] " Luigi Semenzato
2013-03-21 13:17   ` peterasplund
     [not found]     ` <CAEQAOwpmnLXBCJQTf_xU-oSKvAtmpQjHWwMYDm_QOsP+1Kd_aQ@mail.gmail.com>
2013-03-27 15:22       ` Rajiv Andrade
2013-03-28  8:49         ` Aaron Lu
2013-03-28 13:12           ` Peter.Huewe
2013-03-28 14:58             ` peterasplund
2013-04-01 21:01             ` peterasplund [this message]
2013-04-01 21:12               ` Peter Hüwe
2013-04-02 14:34                 ` peterasplund
2013-04-01 21:17             ` peterasplund
2013-04-02 14:03               ` Kent Yoder
2013-04-06 16:00                 ` peterasplund
2013-04-11 21:41                   ` Kent Yoder
2013-04-23 14:30                     ` peterasplund
2013-04-23 14:43                       ` Kent Yoder
2013-04-23 15:03                         ` peterasplund
2013-04-23 16:29                           ` Kent Yoder
2013-04-29  9:38                             ` peterasplund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9f68a46fb9ec6012668db36b7f7eff03@gentoo.se \
    --to=peterasplund@gentoo.se \
    --cc=Peter.Huewe@infineon.com \
    --cc=aaron.lu@intel.com \
    --cc=key@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mail@srajiv.net \
    --cc=tpmdd-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®