Re: [PATCH] scsi: arcmsr: replace snprintf with sysfs_emit

[Damien Le Moal <damien.lemoal@opensource.wdc.com>]

On 2/9/22 09:47, davidcomponentone@gmail.com wrote:
> From: Yang Guang <yang.guang5@zte.com.cn>
> 
> coccinelle report:
> ./drivers/scsi/arcmsr/arcmsr_attr.c:297:8-16:
> WARNING: use scnprintf or sprintf
> ./drivers/scsi/arcmsr/arcmsr_attr.c:273:8-16:
> WARNING: use scnprintf or sprintf
> ./drivers/scsi/arcmsr/arcmsr_attr.c:285:8-16:
> WARNING: use scnprintf or sprintf
> ./drivers/scsi/arcmsr/arcmsr_attr.c:261:8-16:
> WARNING: use scnprintf or sprintf
> ./drivers/scsi/arcmsr/arcmsr_attr.c:374:8-16:
> WARNING: use scnprintf or sprintf
> ./drivers/scsi/arcmsr/arcmsr_attr.c:309:8-16:
> WARNING: use scnprintf or sprintf
> ./drivers/scsi/arcmsr/arcmsr_attr.c:348:8-16:
> WARNING: use scnprintf or sprintf
> ./drivers/scsi/arcmsr/arcmsr_attr.c:335:8-16:
> WARNING: use scnprintf or sprintf
> ./drivers/scsi/arcmsr/arcmsr_attr.c:361:8-16:
> WARNING: use scnprintf or sprintf
> ./drivers/scsi/arcmsr/arcmsr_attr.c:322:8-16:
> WARNING: use scnprintf or sprintf
> 
> Use sysfs_emit instead of scnprintf or sprintf makes more sense.
> 
> Reported-by: Zeal Robot <zealci@zte.com.cn>
> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
> Signed-off-by: David Yang <davidcomponentone@gmail.com>
> ---
>  drivers/scsi/arcmsr/arcmsr_attr.c | 30 ++++++++++--------------------
>  1 file changed, 10 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
> index baeb5e795690..e66d761926e9 100644
> --- a/drivers/scsi/arcmsr/arcmsr_attr.c
> +++ b/drivers/scsi/arcmsr/arcmsr_attr.c
> @@ -258,8 +258,7 @@ static ssize_t
>  arcmsr_attr_host_driver_version(struct device *dev,
>  				struct device_attribute *attr, char *buf)
>  {
> -	return snprintf(buf, PAGE_SIZE,
> -			"%s\n",
> +	return sysfs_emit(buf, "%s\n",
>  			ARCMSR_DRIVER_VERSION);

No need for the line break.

>  }
>  
> @@ -270,8 +269,7 @@ arcmsr_attr_host_driver_posted_cmd(struct device *dev,
>  	struct Scsi_Host *host = class_to_shost(dev);
>  	struct AdapterControlBlock *acb =
>  		(struct AdapterControlBlock *) host->hostdata;
> -	return snprintf(buf, PAGE_SIZE,
> -			"%4d\n",
> +	return sysfs_emit(buf, "%4d\n",
>  			atomic_read(&acb->ccboutstandingcount));
>  }
>  
> @@ -282,8 +280,7 @@ arcmsr_attr_host_driver_reset(struct device *dev,
>  	struct Scsi_Host *host = class_to_shost(dev);
>  	struct AdapterControlBlock *acb =
>  		(struct AdapterControlBlock *) host->hostdata;
> -	return snprintf(buf, PAGE_SIZE,
> -			"%4d\n",
> +	return sysfs_emit(buf, "%4d\n",
>  			acb->num_resets);

Please add a blank line after the declarations and there is no need for
the line break. The format should be %4u (unsigned value).

>  }
>  
> @@ -294,8 +291,7 @@ arcmsr_attr_host_driver_abort(struct device *dev,
>  	struct Scsi_Host *host = class_to_shost(dev);
>  	struct AdapterControlBlock *acb =
>  		(struct AdapterControlBlock *) host->hostdata;
> -	return snprintf(buf, PAGE_SIZE,
> -			"%4d\n",
> +	return sysfs_emit(buf, "%4d\n",
>  			acb->num_aborts);

Same comments (all of them).

>  }
>  
> @@ -306,8 +302,7 @@ arcmsr_attr_host_fw_model(struct device *dev, struct device_attribute *attr,
>  	struct Scsi_Host *host = class_to_shost(dev);
>  	struct AdapterControlBlock *acb =
>  		(struct AdapterControlBlock *) host->hostdata;
> -	return snprintf(buf, PAGE_SIZE,
> -			"%s\n",
> +	return sysfs_emit(buf, "%s\n",
>  			acb->firm_model);

blank line and line break comments apply.

>  }
>  
> @@ -319,8 +314,7 @@ arcmsr_attr_host_fw_version(struct device *dev,
>  	struct AdapterControlBlock *acb =
>  			(struct AdapterControlBlock *) host->hostdata;
>  
> -	return snprintf(buf, PAGE_SIZE,
> -			"%s\n",
> +	return sysfs_emit(buf, "%s\n",
>  			acb->firm_version);

line break not needed.

>  }
>  
> @@ -332,8 +326,7 @@ arcmsr_attr_host_fw_request_len(struct device *dev,
>  	struct AdapterControlBlock *acb =
>  		(struct AdapterControlBlock *) host->hostdata;
>  
> -	return snprintf(buf, PAGE_SIZE,
> -			"%4d\n",
> +	return sysfs_emit(buf, "%4d\n",
>  			acb->firm_request_len);

line break not needed and %u format.

>  }
>  
> @@ -345,8 +338,7 @@ arcmsr_attr_host_fw_numbers_queue(struct device *dev,
>  	struct AdapterControlBlock *acb =
>  		(struct AdapterControlBlock *) host->hostdata;
>  
> -	return snprintf(buf, PAGE_SIZE,
> -			"%4d\n",
> +	return sysfs_emit(buf, "%4d\n",
>  			acb->firm_numbers_queue);

Same.

>  }
>  
> @@ -358,8 +350,7 @@ arcmsr_attr_host_fw_sdram_size(struct device *dev,
>  	struct AdapterControlBlock *acb =
>  		(struct AdapterControlBlock *) host->hostdata;
>  
> -	return snprintf(buf, PAGE_SIZE,
> -			"%4d\n",
> +	return sysfs_emit(buf, "%4d\n",
>  			acb->firm_sdram_size);

Again same.

>  }
>  
> @@ -371,8 +362,7 @@ arcmsr_attr_host_fw_hd_channels(struct device *dev,
>  	struct AdapterControlBlock *acb =
>  		(struct AdapterControlBlock *) host->hostdata;
>  
> -	return snprintf(buf, PAGE_SIZE,
> -			"%4d\n",
> +	return sysfs_emit(buf, "%4d\n",
>  			acb->firm_hd_channels);
>  }

And here too.


-- 
Damien Le Moal
Western Digital Research