mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "\"J.A. Magallón\"" <jamagallon@ono.com>
To: Linux-Kernel <linux-kernel@vger.kernel.org>
Subject: Performance of bonding driver
Date: Fri, 20 Nov 2009 16:51:47 +0100	[thread overview]
Message-ID: <A58902EC-8913-46FC-A8FF-0F67961B8C11@ono.com> (raw)

Hi...

I have tw boxes which I linked together vi 2x gigabit interfaces and a
3Com switch. Each interface is:

02:0a.0 Ethernet controller: Intel Corporation 82541EI Gigabit Ethernet Controller
02:0b.0 Ethernet controller: Intel Corporation 82541EI Gigabit Ethernet Controller

The switch is private for them, so there is no more taffic.
One interface alone works pretty well:

[  3] local 192.168.1.208 port 37739 connected with 192.168.1.226 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec  1.00 GBytes    861 Mbits/sec

I loaded bondin driver with no parameters, and using iperf to test the connection
I get:

[  5] local 192.168.1.208 port 5001 connected with 192.168.1.226 port 40036
[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-10.0 sec    812 MBytes    679 Mbits/sec

In the node which receives, two instances of iftop on slave interfaces
show that load is balanced, but none flies higher than about 300 Mb/s.

Any ideas ?
Is bonding dependent on CPU power ? Boxes are P4-HT@2.8, 3Gb of RAM.

TIA

--
J.A. Magallon <jamagallon()ono!com>     \               Software is like sex:
                                         \         It's better when it's free





             reply	other threads:[~2009-11-20 15:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-20 15:51 "J.A. Magallón" [this message]
2009-11-20 19:16 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=A58902EC-8913-46FC-A8FF-0F67961B8C11@ono.com \
    --to=jamagallon@ono.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®