mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Qiang Ma <maqianga@uniontech.com>
To: alexander.deucher@amd.com, christian.koenig@amd.com,
	Xinhui.Pan@amd.com, airlied@gmail.com, daniel@ffwll.ch,
	srinivasan.shanmugam@amd.com, sunran001@208suo.com
Cc: amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] drm/amdgpu: Clear the hotplug interrupt ack bit before hpd initialization
Date: Wed, 13 Mar 2024 14:18:27 +0800	[thread overview]
Message-ID: <A65A2F93D9F165EC+20240313141827.40f30bd5@john-PC> (raw)
In-Reply-To: <20240131075703.24600-1-maqianga@uniontech.com>

On Wed, 31 Jan 2024 15:57:03 +0800
Qiang Ma <maqianga@uniontech.com> wrote:

Hello everyone, please help review this patch.

  Qiang Ma

> Problem:
> The computer in the bios initialization process, unplug the HDMI
> display, wait until the system up, plug in the HDMI display, did not
> enter the hotplug interrupt function, the display is not bright.
> 
> Fix:
> After the above problem occurs, and the hpd ack interrupt bit is 1,
> the interrupt should be cleared during hpd_init initialization so that
> when the driver is ready, it can respond to the hpd interrupt
> normally.
> 
> Signed-off-by: Qiang Ma <maqianga@uniontech.com>
> ---
> v2:
>  - Remove unused variable 'tmp'
>  - Fixed function spelling errors
>  
> drivers/gpu/drm/amd/amdgpu/dce_v10_0.c |  2 ++
>  drivers/gpu/drm/amd/amdgpu/dce_v11_0.c |  2 ++
>  drivers/gpu/drm/amd/amdgpu/dce_v6_0.c  | 22 ++++++++++++++++++----
>  drivers/gpu/drm/amd/amdgpu/dce_v8_0.c  | 22 ++++++++++++++++++----
>  4 files changed, 40 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
> b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c index
> bb666cb7522e..12a8ba929a72 100644 ---
> a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c +++
> b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c @@ -51,6 +51,7 @@
>  
>  static void dce_v10_0_set_display_funcs(struct amdgpu_device *adev);
>  static void dce_v10_0_set_irq_funcs(struct amdgpu_device *adev);
> +static void dce_v10_0_hpd_int_ack(struct amdgpu_device *adev, int
> hpd); 
>  static const u32 crtc_offsets[] = {
>  	CRTC0_REGISTER_OFFSET,
> @@ -363,6 +364,7 @@ static void dce_v10_0_hpd_init(struct
> amdgpu_device *adev) AMDGPU_HPD_DISCONNECT_INT_DELAY_IN_MS);
>  		WREG32(mmDC_HPD_TOGGLE_FILT_CNTL +
> hpd_offsets[amdgpu_connector->hpd.hpd], tmp); 
> +		dce_v10_0_hpd_int_ack(adev,
> amdgpu_connector->hpd.hpd); dce_v10_0_hpd_set_polarity(adev,
> amdgpu_connector->hpd.hpd); amdgpu_irq_get(adev, &adev->hpd_irq,
>  			       amdgpu_connector->hpd.hpd);
> diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
> b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c index
> 7af277f61cca..745e4fdffade 100644 ---
> a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c +++
> b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c @@ -51,6 +51,7 @@
>  
>  static void dce_v11_0_set_display_funcs(struct amdgpu_device *adev);
>  static void dce_v11_0_set_irq_funcs(struct amdgpu_device *adev);
> +static void dce_v11_0_hpd_int_ack(struct amdgpu_device *adev, int
> hpd); 
>  static const u32 crtc_offsets[] =
>  {
> @@ -387,6 +388,7 @@ static void dce_v11_0_hpd_init(struct
> amdgpu_device *adev) AMDGPU_HPD_DISCONNECT_INT_DELAY_IN_MS);
>  		WREG32(mmDC_HPD_TOGGLE_FILT_CNTL +
> hpd_offsets[amdgpu_connector->hpd.hpd], tmp); 
> +		dce_v11_0_hpd_int_ack(adev,
> amdgpu_connector->hpd.hpd); dce_v11_0_hpd_set_polarity(adev,
> amdgpu_connector->hpd.hpd); amdgpu_irq_get(adev, &adev->hpd_irq,
> amdgpu_connector->hpd.hpd); }
> diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c
> b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c index
> 143efc37a17f..28c4a735716b 100644 ---
> a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c +++
> b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c @@ -272,6 +272,21 @@ static
> void dce_v6_0_hpd_set_polarity(struct amdgpu_device *adev,
> WREG32(mmDC_HPD1_INT_CONTROL + hpd_offsets[hpd], tmp); }
>  
> +static void dce_v6_0_hpd_int_ack(struct amdgpu_device *adev,
> +				 int hpd)
> +{
> +	u32 tmp;
> +
> +	if (hpd >= adev->mode_info.num_hpd) {
> +		DRM_DEBUG("invalid hdp %d\n", hpd);
> +		return;
> +	}
> +
> +	tmp = RREG32(mmDC_HPD1_INT_CONTROL + hpd_offsets[hpd]);
> +	tmp |= DC_HPD1_INT_CONTROL__DC_HPD1_INT_ACK_MASK;
> +	WREG32(mmDC_HPD1_INT_CONTROL + hpd_offsets[hpd], tmp);
> +}
> +
>  /**
>   * dce_v6_0_hpd_init - hpd setup callback.
>   *
> @@ -311,6 +326,7 @@ static void dce_v6_0_hpd_init(struct
> amdgpu_device *adev) continue;
>  		}
>  
> +		dce_v6_0_hpd_int_ack(adev,
> amdgpu_connector->hpd.hpd); dce_v6_0_hpd_set_polarity(adev,
> amdgpu_connector->hpd.hpd); amdgpu_irq_get(adev, &adev->hpd_irq,
> amdgpu_connector->hpd.hpd); }
> @@ -3088,7 +3104,7 @@ static int dce_v6_0_hpd_irq(struct
> amdgpu_device *adev, struct amdgpu_irq_src *source,
>  			    struct amdgpu_iv_entry *entry)
>  {
> -	uint32_t disp_int, mask, tmp;
> +	uint32_t disp_int, mask;
>  	unsigned hpd;
>  
>  	if (entry->src_data[0] >= adev->mode_info.num_hpd) {
> @@ -3101,9 +3117,7 @@ static int dce_v6_0_hpd_irq(struct
> amdgpu_device *adev, mask = interrupt_status_offsets[hpd].hpd;
>  
>  	if (disp_int & mask) {
> -		tmp = RREG32(mmDC_HPD1_INT_CONTROL +
> hpd_offsets[hpd]);
> -		tmp |= DC_HPD1_INT_CONTROL__DC_HPD1_INT_ACK_MASK;
> -		WREG32(mmDC_HPD1_INT_CONTROL + hpd_offsets[hpd],
> tmp);
> +		dce_v6_0_hpd_int_ack(adev, hpd);
>  		schedule_delayed_work(&adev->hotplug_work, 0);
>  		DRM_DEBUG("IH: HPD%d\n", hpd + 1);
>  	}
> diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c
> b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c index
> adeddfb7ff12..8ff2b5adfd95 100644 ---
> a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c +++
> b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c @@ -264,6 +264,21 @@ static
> void dce_v8_0_hpd_set_polarity(struct amdgpu_device *adev,
> WREG32(mmDC_HPD1_INT_CONTROL + hpd_offsets[hpd], tmp); }
>  
> +static void dce_v8_0_hpd_int_ack(struct amdgpu_device *adev,
> +				 int hpd)
> +{
> +	u32 tmp;
> +
> +	if (hpd >= adev->mode_info.num_hpd) {
> +		DRM_DEBUG("invalid hdp %d\n", hpd);
> +		return;
> +	}
> +
> +	tmp = RREG32(mmDC_HPD1_INT_CONTROL + hpd_offsets[hpd]);
> +	tmp |= DC_HPD1_INT_CONTROL__DC_HPD1_INT_ACK_MASK;
> +	WREG32(mmDC_HPD1_INT_CONTROL + hpd_offsets[hpd], tmp);
> +}
> +
>  /**
>   * dce_v8_0_hpd_init - hpd setup callback.
>   *
> @@ -303,6 +318,7 @@ static void dce_v8_0_hpd_init(struct
> amdgpu_device *adev) continue;
>  		}
>  
> +		dce_v8_0_hpd_int_ack(adev,
> amdgpu_connector->hpd.hpd); dce_v8_0_hpd_set_polarity(adev,
> amdgpu_connector->hpd.hpd); amdgpu_irq_get(adev, &adev->hpd_irq,
> amdgpu_connector->hpd.hpd); }
> @@ -3176,7 +3192,7 @@ static int dce_v8_0_hpd_irq(struct
> amdgpu_device *adev, struct amdgpu_irq_src *source,
>  			    struct amdgpu_iv_entry *entry)
>  {
> -	uint32_t disp_int, mask, tmp;
> +	uint32_t disp_int, mask;
>  	unsigned hpd;
>  
>  	if (entry->src_data[0] >= adev->mode_info.num_hpd) {
> @@ -3189,9 +3205,7 @@ static int dce_v8_0_hpd_irq(struct
> amdgpu_device *adev, mask = interrupt_status_offsets[hpd].hpd;
>  
>  	if (disp_int & mask) {
> -		tmp = RREG32(mmDC_HPD1_INT_CONTROL +
> hpd_offsets[hpd]);
> -		tmp |= DC_HPD1_INT_CONTROL__DC_HPD1_INT_ACK_MASK;
> -		WREG32(mmDC_HPD1_INT_CONTROL + hpd_offsets[hpd],
> tmp);
> +		dce_v8_0_hpd_int_ack(adev, hpd);
>  		schedule_delayed_work(&adev->hotplug_work, 0);
>  		DRM_DEBUG("IH: HPD%d\n", hpd + 1);
>  	}


  reply	other threads:[~2024-03-13  6:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-31  7:57 Qiang Ma
2024-03-13  6:18 ` Qiang Ma [this message]
2024-03-14 14:40   ` Deucher, Alexander
2024-03-27  3:31     ` Qiang Ma
2024-03-27  3:51       ` Alex Deucher
2024-03-27  4:37         ` Qiang Ma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=A65A2F93D9F165EC+20240313141827.40f30bd5@john-PC \
    --to=maqianga@uniontech.com \
    --cc=Xinhui.Pan@amd.com \
    --cc=airlied@gmail.com \
    --cc=alexander.deucher@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=christian.koenig@amd.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=srinivasan.shanmugam@amd.com \
    --cc=sunran001@208suo.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®