From: Bret Towe <magnade@gmail.com>
To: Miles Lane <miles.lane@gmail.com>
Cc: LKML <linux-kernel@vger.kernel.org>, David Airlie <airlied@linux.ie>
Subject: Re: 2.6.35-rc2-git5 -- [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Date: Mon, 28 Jun 2010 08:56:26 -0700 [thread overview]
Message-ID: <AANLkTimBY1ydg_PO9whlsO0LM64L7M09AtRX_f9q8dHl@mail.gmail.com> (raw)
In-Reply-To: <AANLkTim0jVRyqkwlGOcrg_XTvUQwcBYfWJX-aRzkkrLG@mail.gmail.com>
On Fri, Jun 11, 2010 at 1:31 PM, Miles Lane <miles.lane@gmail.com> wrote:
> # dmesg | grep -i drm
> How should I go about debugging this? I am running Ubuntu unstable,
> which just moved to the latest Xorg code (xserver-xorg-core
> 2:1.8.1.901-1ubuntu1 and xserver-xorg-video-intel 2:2.11.0-1ubuntu2
> ).
>
> [ 0.971549] [drm] Initialized drm 1.1.0 20060810
> [ 1.171050] [drm] set up 31M of stolen space
> [ 2.075347] fb0: inteldrmfb frame buffer device
> [ 2.075351] drm: registered panic notifier
> [ 2.081609] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 66.545581] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
> [ 75.336738] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
> [30843.394355] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
> [33302.610229] [drm:init_ring_common] *ERROR* render ring head not
> reset to zero ctl 00000000 head fffffffc tail 00000000 start 02000000
> [33302.610238] [drm:init_ring_common] *ERROR* render ring head forced
> to zero ctl 00000000 head 00000000 tail 00000000 start 02000000
> [33305.239941] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
> [35339.052446] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series
> Chipset Integrated Graphics Controller (rev 07)
> Subsystem: ASUSTeK Computer Inc. Device 1af2
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 44
> Region 0: Memory at fcc00000 (64-bit, non-prefetchable) [size=4M]
> Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 4: I/O ports at cc00 [size=8]
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
> Address: fee0200c Data: 4169
> Capabilities: [d0] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: i915
> 00: 86 80 42 2a 07 04 90 00 07 00 00 03 00 00 00 00
> 10: 04 00 c0 fc 00 00 00 00 0c 00 00 d0 00 00 00 00
> 20: 01 cc 00 00 00 00 00 00 00 00 00 00 43 10 f2 1a
> 30: 00 00 00 00 90 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 48 00 00 00 09 00 0a 11 88 30 00 1c
> 50: 01 80 50 03 0b 00 00 00 00 00 00 00 00 00 00 be
> 60: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 05 d0 01 00 0c 20 e0 fe 69 41 00 00 00 00 00 00
> a0: 00 00 00 00 09 00 06 20 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 40 01 00 00
> d0: 01 00 23 00 00 00 00 00 00 00 00 00 34 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 80 00 1a 41 20 00 00
> f0: 0d 1c 34 07 ff 00 00 00 a0 0f 07 00 e4 20 d8 bd
>
> 01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce
> G210M] (rev a2)
> Subsystem: ASUSTeK Computer Inc. Device 1af2
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [disabled] [size=16M]
> Region 1: Memory at e0000000 (64-bit, prefetchable) [disabled] [size=256M]
> Region 3: Memory at fa000000 (64-bit, prefetchable) [disabled] [size=32M]
> Region 5: I/O ports at dc00 [disabled] [size=128]
> Expansion ROM at fe980000 [disabled] [size=512K]
> Capabilities: [60] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0
> <256ns, L1 <1us
> ClockPM+ Suprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive-
> BWMgmt- ABWMgmt-
> Capabilities: [b4] Vendor Specific Information <?>
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [128] Power Budgeting <?>
> Capabilities: [600] Vendor Specific Information <?>
> 00: de 10 74 0a 00 00 10 00 a2 00 00 03 08 00 80 00
> 10: 00 00 00 fd 0c 00 00 e0 00 00 00 00 0c 00 00 fa
> 20: 00 00 00 00 01 dc 00 00 00 00 00 00 43 10 f2 1a
> 30: 00 00 98 fe 60 00 00 00 00 00 00 00 0a 01 00 00
> 40: 43 10 f2 1a 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
> 60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 10 b4 02 00 a0 8d 64 00
> 80: 10 28 00 00 02 2d 04 00 4b 00 81 10 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00
> a0: 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00
> b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> CONFIG_AGP=y
> CONFIG_AGP_INTEL=y
> CONFIG_VGA_ARB=y
> CONFIG_VGA_ARB_MAX_GPUS=2
> CONFIG_VGA_SWITCHEROO=y
> CONFIG_DRM=y
> CONFIG_DRM_KMS_HELPER=y
> CONFIG_DRM_I915=y
> CONFIG_DRM_I915_KMS=y
> CONFIG_VIDEO_OUTPUT_CONTROL=y
> CONFIG_FB=y
> CONFIG_FIRMWARE_EDID=y
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> CONFIG_FB_SYS_FILLRECT=y
> CONFIG_FB_SYS_COPYAREA=y
> CONFIG_FB_SYS_IMAGEBLIT=y
> CONFIG_FB_SYS_FOPS=y
> CONFIG_FB_DEFERRED_IO=y
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
> CONFIG_XEN_FBDEV_FRONTEND=y
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_LCD_CLASS_DEVICE=m
> CONFIG_LCD_PLATFORM=m
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
any luck on this? I'm seeing the same error with a radeon card
I'm on a 2.6.35-rc3 kernel btw
on ubuntu lucid
and not sure if its related or not but my consoles are broken
in that i can't see them switching to them gives dmesg an error
like above
any dmesg or config output required say so I'll be able to add them tonight
next prev parent reply other threads:[~2010-06-28 16:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-11 20:31 Miles Lane
2010-06-28 15:56 ` Bret Towe [this message]
2010-08-04 3:27 ` David Fries
2010-08-04 4:23 ` Bret Towe
2010-08-06 0:55 ` David Fries
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTimBY1ydg_PO9whlsO0LM64L7M09AtRX_f9q8dHl@mail.gmail.com \
--to=magnade@gmail.com \
--cc=airlied@linux.ie \
--cc=linux-kernel@vger.kernel.org \
--cc=miles.lane@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®