Re: sg timeout problem

["Norman Diamond" <n0diamond@yahoo.co.jp>]

>> But if sg is running on top of an actual SCSI driver, someone aborts the
>> ioctl after 3 seconds.  The ioctl returns success even though the
>> operation didn't complete.  I tried this with two Adaptec drivers and one
>> NinjaSCSI driver with 100% repro.
>>
>> What am I missing?  I need the call to run to completion.
>
> If you set it to the max of a signed int does it behave, or to a large
> value thats well under the limit. That will help tell if there is a
> problem with sign handling in the scsi code somewhere or it is getting
> multiplied up for some reason.

I have the impression now that the drives are lying and it's not the fault
of the drivers or cards.  The same problem occured with a fourth card and a
non-Linux system.

Anyway I also tried changing the timeout to 86400000 milliseconds (one day)
and it made no difference.  So again I stop blaming the drivers.

--------------------------------------
Power up the Internet with Yahoo! Toolbar.
http://pr.mail.yahoo.co.jp/toolbar/