From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1765159AbZLQRhj (ORCPT ); Thu, 17 Dec 2009 12:37:39 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757590AbZLQRhf (ORCPT ); Thu, 17 Dec 2009 12:37:35 -0500 Received: from exsmtp012-12.exch012.intermedia.net ([64.78.17.143]:38918 "HELO EXSMTP012-12.exch012.intermedia.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1765054AbZLQRhe convert rfc822-to-8bit (ORCPT ); Thu, 17 Dec 2009 12:37:34 -0500 x-mimeole: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT Subject: RE: [lm-sensors] [PATCH 1/2] Wrong ADT7462_VOLT_COUNT for linux-2.6.30 adt7462 hwmon driver Date: Thu, 17 Dec 2009 09:37:32 -0800 Message-ID: In-Reply-To: <20091217171445.0bd28259@hyperion.delvare> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: [lm-sensors] [PATCH 1/2] Wrong ADT7462_VOLT_COUNT for linux-2.6.30 adt7462 hwmon driver Thread-Index: Acp/NA6fXJNCk1SyS+eaCGwo7U0ZygAC0qDA References: <20091217171445.0bd28259@hyperion.delvare> From: "Ray Copeland" To: "Jean Delvare" Cc: , X-OriginalArrivalTime: 17 Dec 2009 17:37:34.0205 (UTC) FILETIME=[9DE30AD0:01CA7F3F] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, Jean, thanks for letting me know. This is my first time sending a patch, and I should have sent it first to Darrick to have him review it before I posted directly to the group. He told me how to rework it properly so that I will do it right next time. Sorry if this caused any problem for you. Regards, Ray Copeland -----Original Message----- From: Jean Delvare [mailto:khali@linux-fr.org] Sent: Thursday, December 17, 2009 8:15 AM To: Ray Copeland Cc: linux-kernel@vger.kernel.org; lm-sensors@lm-sensors.org Subject: Re: [lm-sensors] [PATCH 1/2] Wrong ADT7462_VOLT_COUNT for linux-2.6.30 adt7462 hwmon driver Hi Ray, On Wed, 16 Dec 2009 17:26:19 -0800, Ray Copeland wrote: > From: Ray Copeland > Date: Wed, 16 Dec 2009 > Subject: [PATCH 1/2] Wrong ADT7462_VOLT_COUNT for linux-2.6.30 adt7462 hwmon driver > > Description: > > The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the > for loops that use this as a limit count are of the typical form, "for > (n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages > w/o missing the last one it is necessary for the count to be one greater > than it is. (Specifically, you will miss the +1.5V 3GPIO input with count > = 12 vs. 13.) > > Signed-off-by: Ray Copeland > > Diff with changes vs. original adt7462.c 2.6.30 version: > > --- adt7462.c.orig 2009-12-15 15:51:05.000000000 -0800 > +++ adt7462.c.volt_count 2009-12-16 14:06:01.000000000 -0800 > @@ -182,7 +182,7 @@ > * > * Some, but not all, of these voltages have low/high limits. > */ > -#define ADT7462_VOLT_COUNT 12 > +#define ADT7462_VOLT_COUNT 13 > > #define ADT7462_VENDOR 0x41 > #define ADT7462_DEVICE 0x62 While the patch looks functionally correct, it is horribly broken in its format. You sent a HTML mail instead of only plain text. Your mailer turned the tabs into spaces. And the paths are missing from the patch header. Please learn how to send proper patches that kernel maintainers can apply. Documentation/SubmittingPatches is a good start. -- Jean Delvare