[PATCH 3/4] net: dsa: b53: fail switch initialization for unsupported switch types

[Paul Geurts <paul.geurts@prodrive-technologies.com>]

When no supported switch device is found in the b53_switch_chips array is found, the driver continues to do a best effort initialization, wihch most likely results in an error and most definetely a non-functional Ethernet switch.

Now, the switch_init function just returns -EINVAL immediately when no valid chip data is found.

Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
---
 drivers/net/dsa/b53/b53_common.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 6aa76cb4f992..3aa0672f2ba9 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2572,11 +2572,13 @@ static int b53_switch_init(struct b53_device *dev)  {
 	unsigned int i;
 	int ret;
+	bool config_found = false;
 
 	for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
 		const struct b53_chip_data *chip = &b53_switch_chips[i];
 
 		if (chip->chip_id == dev->chip_id) {
+			config_found = true;
 			if (!dev->enabled_ports)
 				dev->enabled_ports = chip->enabled_ports;
 			dev->name = chip->dev_name;
@@ -2593,6 +2595,11 @@ static int b53_switch_init(struct b53_device *dev)
 		}
 	}
 
+	if (!config_found) {
+		dev_err(dev->dev, "No configuration found for switch id 0x%X\n", dev->chip_id);
+		return -EINVAL;
+	}
+
 	/* check which BCM5325x version we have */
 	if (is5325(dev)) {
 		u8 vc4;
--
2.30.2