From: Alexandre TORGUE <alexandre.torgue@st.com>
To: dillon min <dillon.minfei@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"linux-stm32@st-md-mailman.stormreply.com"
<linux-stm32@st-md-mailman.stormreply.com>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
"linux@armlinux.org.uk" <linux@armlinux.org.uk>,
Vladimir Murzin <vladimir.murzin@arm.com>,
"afzal.mohd.ma@gmail.com" <afzal.mohd.ma@gmail.com>
Subject: RE: [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support
Date: Thu, 11 Mar 2021 10:26:34 +0000 [thread overview]
Message-ID: <AS8PR10MB47127FD40F6782B279B5998BEE909@AS8PR10MB4712.EURPRD10.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <CAL9mu0LwT7GqWQY1Dpw3zLnS+oX8KFq=Lrp6NSBJvSgcsxEQVQ@mail.gmail.com>
Hi Dillon
> -----Original Message-----
> From: dillon min <dillon.minfei@gmail.com>
> Sent: mercredi 10 mars 2021 12:48
> To: Rob Herring <robh+dt@kernel.org>; Maxime Coquelin
> <mcoquelin.stm32@gmail.com>; Alexandre TORGUE
> <alexandre.torgue@st.com>; open list:OPEN FIRMWARE AND FLATTENED
> DEVICE TREE BINDINGS <devicetree@vger.kernel.org>; linux-stm32@st-md-
> mailman.stormreply.com; Linux ARM <linux-arm-
> kernel@lists.infradead.org>; Linux Kernel Mailing List <linux-
> kernel@vger.kernel.org>; linux@armlinux.org.uk; Vladimir Murzin
> <vladimir.murzin@arm.com>; afzal.mohd.ma@gmail.com
> Subject: Re: [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board
> support
>
> for the device tree part , still waiting review. just a gentle ping.
> if Mr Alexandre torgue can take a look, would be great.
>
Sorry for the delay. For next versions can you send it to
Alexandre.torgue@foss.st.com please.
Thanks
Alex
> thanks,
>
> On Wed, Mar 3, 2021 at 4:05 PM <dillon.minfei@gmail.com> wrote:
> >
> > From: dillon min <dillon.minfei@gmail.com>
> >
> > This patchset intend to add art-pi board support, this board developed
> > by rt-thread(https://www.rt-thread.org/).
> >
> > Board resources:
> >
> > 8MiB QSPI flash
> > 16MiB SPI flash
> > 32MiB SDRAM
> > AP6212 wifi,bt,fm comb
> >
> > sw context:
> > - as stm32h750 just has 128k bytes internal flash, so running a fw on
> > internal flash to download u-boot/kernel to qspi flash, boot
> > u-boot/kernel from qspi flash. this fw is based on rt-thread.
> > - kernel can be xip on qspi flash or load to sdram
> > - root filesystem is jffs2(created by buildroot), stored on spi flash
> >
> > to support the boad, add following changes.
> > - fix r0-r3, r12 register restore failed after svc call,
> > - add dts binding
> > - update yaml doc
> >
> > dillon min (8):
> > ARM: ARMv7-M: Fix register restore corrupt after svc call
> > Documentation: arm: stm32: Add stm32h750 value line
> > dt-bindings: arm: stm32: Add compatible strings for ART-PI board
> > dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl
> > ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h75x
> > ARM: dts: stm32: add stm32h750-pinctrl.dtsi
> > ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
> > ARM: stm32: add initial support for stm32h750
> >
> > Documentation/arm/index.rst | 1 +
> > Documentation/arm/stm32/stm32h750-overview.rst | 33 ++
> > .../devicetree/bindings/arm/stm32/stm32.yaml | 4 +
> > .../bindings/pinctrl/st,stm32-pinctrl.yaml | 1 +
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 392
> +++++++++++++++++++++
> > arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 307 +---------------
> > arch/arm/boot/dts/stm32h743.dtsi | 30 ++
> > arch/arm/boot/dts/stm32h750-pinctrl.dtsi | 11 +
> > arch/arm/boot/dts/stm32h750.dtsi | 5 +
> > arch/arm/boot/dts/stm32h750i-art-pi.dts | 227 ++++++++++++
> > arch/arm/mach-stm32/board-dt.c | 1 +
> > arch/arm/mm/proc-v7m.S | 5 +-
> > 13 files changed, 716 insertions(+), 302 deletions(-) create mode
> > 100644 Documentation/arm/stm32/stm32h750-overview.rst
> > create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi
> > create mode 100644 arch/arm/boot/dts/stm32h750-pinctrl.dtsi
> > create mode 100644 arch/arm/boot/dts/stm32h750.dtsi create mode
> > 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts
> >
> > --
> > 2.7.4
> >
next prev parent reply other threads:[~2021-03-11 10:27 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-03 8:05 dillon.minfei
2021-03-03 8:05 ` [PATCH 1/8] ARM: ARMv7-M: Fix register restore corrupt after svc call dillon.minfei
2021-03-03 9:52 ` Vladimir Murzin
2021-03-03 13:35 ` dillon min
2021-03-03 14:19 ` Vladimir Murzin
2021-03-04 5:42 ` dillon min
2021-03-04 9:02 ` Vladimir Murzin
2021-03-03 8:05 ` [PATCH 2/8] Documentation: arm: stm32: Add stm32h750 value line dillon.minfei
2021-03-03 8:05 ` [PATCH 3/8] dt-bindings: arm: stm32: Add compatible strings for ART-PI board dillon.minfei
2021-03-08 19:50 ` Rob Herring
2021-03-03 8:05 ` [PATCH 4/8] dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl dillon.minfei
2021-03-08 19:50 ` Rob Herring
2021-03-03 8:05 ` [PATCH 5/8] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h75x dillon.minfei
2021-03-11 10:40 ` Alexandre TORGUE
2021-03-11 12:23 ` dillon min
2021-03-11 12:54 ` [Linux-stm32] " Ahmad Fatoum
2021-03-11 13:03 ` dillon min
2021-03-11 13:30 ` Alexandre TORGUE
2021-03-11 14:32 ` dillon min
2021-03-11 14:50 ` Alexandre TORGUE
2021-03-03 8:05 ` [PATCH 6/8] ARM: dts: stm32: add stm32h750-pinctrl.dtsi dillon.minfei
2021-03-03 8:05 ` [PATCH 7/8] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei
2021-03-11 10:42 ` Alexandre TORGUE
2021-03-11 12:32 ` dillon min
2021-03-11 13:31 ` Alexandre TORGUE
2021-03-03 8:05 ` [PATCH 8/8] ARM: stm32: add initial support for stm32h750 dillon.minfei
2021-03-11 10:43 ` Alexandre TORGUE
2021-03-11 12:34 ` dillon min
2021-03-10 11:47 ` [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support dillon min
2021-03-11 10:26 ` Alexandre TORGUE [this message]
2021-03-11 11:30 ` dillon min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AS8PR10MB47127FD40F6782B279B5998BEE909@AS8PR10MB4712.EURPRD10.PROD.OUTLOOK.COM \
--to=alexandre.torgue@st.com \
--cc=afzal.mohd.ma@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dillon.minfei@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vladimir.murzin@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®